BOnour,
j'ai voulu me compiler le dernier noyau de kernel.org cad le 2.6.7 (je suis sous debian)
DOnc je l'ai compilé avec make dep clean bzImages modules
make modules_install et make install comme d'habitude et là au démarrage, j'ai un kernel panic: no init found. Try passing int=option to kernel.
 
J'ai donc booté sur une knoppix, pour ressayer de recompiler mon noyau 2.6.7 en chrootant sur ma débian ,mais ca ne change rien.
Pour ne pas encore perdre 20 mn, à recompiler le 2.6.6, j'ai changé les liens symboliques de vlinuz et System.map pour qu'ils pointent vers vmlinuz-2.6.6 et System.map-2.6.6 au lieu de vmlinuz-2.6.7 et System.map-2.6.7 et j'ai rebooté mais ca ne change rien.
 
Que me conseillez-vous?
De rebooter sur la knoppix, de chrooter et de recompiler mon ancien noyau 2.6.6?
 
Merci
A+.

je conseillerai surtout de vérifier les options de compilation et de fouiller le /var/log/dmesg pour comprendre ce qui a foiré.
Je doute que ce soit la faute du 2.6.7

y'a aucun messagee d'erreur dans /var/log/dmesg
Regarde je te le copie colle.
Merci
a+
 
-----------------------------------------------------------
Linux version 2.6.6 (root@thierry) (version gcc 3.3.3 (Debian 20040422)) #4 SMP Fri Jun 4 09:51:11 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
 BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
 BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131052
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126956 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ASUS P4B266 detected: force use of acpi=ht
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f7720
ACPI: RSDT (v001 ASUS   P4B266   0x42302e31 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS   P4B266   0x42302e31 MSFT 0x31313031) @ 0x1ffec100
ACPI: BOOT (v001 ASUS   P4B266   0x42302e31 MSFT 0x31313031) @ 0x1ffec040
ACPI: MADT (v001 ASUS   P4B266   0x42302e31 MSFT 0x31313031) @ 0x1ffec080
ACPI: DSDT (v001   ASUS P4B266   0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=30a hdc=ide-scsi hdd=ide-scsi max_scsi_luns=1 apm=power-off
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1917.627 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 514700k/524208k available (2136k kernel code, 8764k reserved, 953k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3776.51 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU:     After all inits, caps: 3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 1.90GHz stepping 02
per-CPU timeslice cutoff: 731.40 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (3776.51 BogoMIPS).
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1916.0795 MHz.
..... host bus clock speed is 100.0884 MHz.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1090, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask - try pci=usepirqmask
vga16fb: initializing
vga16fb: mapped to 0xe0800000
fb0: VGA16 VGA frame buffer device
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Real Time Clock Driver v1.12
hw_random: RNG not detected
Linux agpgart interface v0.100 (c) Dave Jones
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
Compaq CISS Driver (v 2.6.2)
HDLC support module revision 1.16
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L120AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
hdd: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
PM: Reading pmdisk image.
PM: Resume from disk failed.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k freed
Adding 530104k swap on /dev/hda11.  Priority:-1 extents:1
EXT3 FS on hda10, internal journal
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
PCI: Found IRQ 9 for device 0000:02:04.0
PCI: Sharing IRQ 9 with 0000:02:09.0
ohci_hcd 0000:02:04.0: NEC Corporation USB
ohci_hcd 0000:02:04.0: irq 9, pci mem e086d000
ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
PCI: Found IRQ 9 for device 0000:02:04.1
ohci_hcd 0000:02:04.1: NEC Corporation USB (#2)
ohci_hcd 0000:02:04.1: irq 9, pci mem e086f000
ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 2
usb 1-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Gamepad [Microsoft SideWinder Game Pad Pro USB version 1.0] on usb-0000:02:04.0-1
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 5 for device 0000:00:1f.2
uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 5, io base 0000b400
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 3
usb 2-1: new full speed USB device using address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:04.2
uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 9, io base 0000b000
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:02:04.2
PCI: Sharing IRQ 9 with 0000:00:1f.4
ehci_hcd 0000:02:04.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:04.2: irq 9, pci mem e0873000
ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:04.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
via-rhine.c:v1.10-LK1.1.19-2.5  July-12-2003  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 9 for device 0000:02:0c.0
eth0: VIA VT6105 Rhine-III at 0xd800, 00:05:5d:6b:3b:a0, IRQ 9.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
usb 3-1: new full speed USB device using address 2
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 2 ports detected
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: PLEXTOR   Model: CD-R   PX-W4824A  Rev: 1.04
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: PIONEER   Model: DVD-RW  DVR-106D  Rev: 1.06
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
usb 3-2: new low speed USB device using address 3
PCI: Found IRQ 10 for device 0000:02:0e.0
input: USB HID v1.00 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1f.2-2
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb 3-1.1: new full speed USB device using address 4
usb-storage: USB Mass Storage device detected
usb-storage: altsetting is 0, id_index is 110
usb-storage: -- associate_dev
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: Endpoints: In: 0xc1615cc4 Out: 0xc1615cd8 Int: 0x00000000 (Period 0)
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is -32, data is 0
usb-storage: *** thread sleeping.
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x18 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
  Vendor: Canon     Model: S530DStorage      Rev: 0112
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x19 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000019 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000019 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
usb-storage: No Sense: No additional sense information
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x1a L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x8000001a L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x8000001a R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: Not Ready: Medium not present
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x1b L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x8000001b L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x8000001b R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: Not Ready: Medium not present
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
USB Mass Storage device found at 4
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-5336  Wed Jan 14 18:29:26 PST 2004
usb 3-1.2: new full speed USB device using address 5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1070
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 5-2: new high speed USB device using address 2
usb 1-1: USB disconnect, address 2
usb 1-1: new low speed USB device using address 3
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Gamepad [Microsoft SideWinder Game Pad Pro USB version 1.0] on usb-0000:02:04.0-1
usb 2-1: USB disconnect, address 2
usb 2-2: new full speed USB device using address 3
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf8000000
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
smbfs: Unrecognized mount option noexec
smbfs: Unrecognized mount option noexec
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
------------------------------------------------------------

Re,
je suis retourné sous knoppix, en rechrootant ma debian.
J'ai recompilé mon noyau 2.6.6 qui vient de debian, et toujours le meme kernel panic au démarrage :-(
(j'ai bien fait toues les etapes :
make dep clean bzImage modules
make modules_install
make install qui remet a jour lilo en mm temps)
 
 
Que puis-je faire?
 
merci
A+.

c'est normal que ton noyau soit compilé avec les support SMP ?
 
sinon, je ne pas. essaies de forcer un runlevel particulier et/ou de booter en single en passant un argument directement à lilo/grub ....

Bonjour,
le problème est réglé.
MOn noyau etait bien compilé, mais il ya quelques temps, j'avais viré une partoche et ca avait décalé les identifcateurs et depuis le temps j'avais pas fair de lilo -v.
Et en fait, c'est le lilo -v, au moment, ou j'ai volu mettre le nouveau noyau qui a foutu le bordel, pq il avait gardé dans le lilo l'ancien hda qui était hda9 alors que je suis en hda10 là, donc une simple modif dans la ligne root= a suffit.
 
Je vous remercie beaucoup.
Par contre, en recompilant,e le nvidia pour le noyau 2.6.7, il me posait plein de questions, genre tel mateirel inclus, et j'avais le choix entre n et M, alors y'en avaittellement, que j'ai appuyé sur enter, jusqu'çà ce qu'il compile.
J'ai installé le deb, il a l'air de marcher.
 
Qu'en pensez-vous?
 
Merci
A+.

Salut thierry_b.
J'aurais bien voulus t'aider,
mais moi chaque fois je compile le noyau 2.6.7-rc3,  
je n'ai aucun probleme a part la carte son qui ne marche plus et l'ecran qui est noir au demarrage (probleme resolut  avec vga=normal, mais toujours pas le son.)
Bon courage.

j'avais le même problème, je l'ai résolu en faisant un nouveau initrd

 
Moi aussi quand j'avais ajouté le support des smileys ça plantait