Salut, j'ai downloadé cdrecorder pour windows et je lance  
 
cdrecord -eject -v speed=4 -data dev=2,1,0 "_live.txt"
 
cdrecord trouve mon lecteur, démarre mais ne grave rien
 
c:\cdrecord -eject -v speed=4 -data dev=2,1,0 "_live.mp3"
 
Cdrecord 1.11a12 (i586-pc-cygwin) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Using libscg version 'schily-0.5'
atapi: -1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8200 '
Revision       : '1.0f'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 2086656 = 2037 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    0 MB
Total size:       1 MB (00:06.60) = 495 sectors
Lout start:       1 MB (00:08/45) = 495 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11856 (97:23/69)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 49
Manufacturer: Customer Pressing Oosterhout
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359354
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:   0 of   0 MB written.
WARNING: padding up to secsize.
Track 01: Total bytes read/written: 1008953/1009664 (493 sectors).
Writing  time:    5.548s
Fixating...
Fixating time:   61.990s
cdrecord: fifo had 16 puts and 16 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.