[4294667.296000] Linux version 2.6.12-9-686-smp (buildd@rothera) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 SMP Mon Oct 10 13:36:57 BST 2005
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[4294667.296000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] On node 0 totalpages: 262064
[4294667.296000] DMA zone: 4096 pages, LIFO batch:1
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32688 pages, LIFO batch:15
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad80
[4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000407 MSFT 0x00000097) @ 0x3ffb0000
[4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x09000407 MSFT 0x00000097) @ 0x3ffb0200
[4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x09000407 MSFT 0x00000097) @ 0x3ffb0390
[4294667.296000] ACPI: OEMB (v001 A M I OEMBIOS 0x09000407 MSFT 0x00000097) @ 0x3ffc0040
[4294667.296000] ACPI: DSDT (v001 A0030 A0030009 0x00000009 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:3 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:3 APIC version 20
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda7 ro quiet
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 3000.577 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.986000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294670.986000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.011000] Memory: 1029492k/1048256k available (1722k kernel code, 17808k reserved, 736k data, 204k init, 130752k highmem)
[4294671.011000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294671.011000] Calibrating delay loop... 5947.39 BogoMIPS (lpj=2973696)
[4294671.034000] Security Framework v1.0.0 initialized
[4294671.034000] SELinux: Disabled at boot.
[4294671.034000] Mount-cache hash table entries: 512
[4294671.034000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294671.034000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294671.034000] monitor/mwait feature present.
[4294671.034000] using mwait in idle threads.
[4294671.034000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294671.034000] CPU: L2 cache: 1024K
[4294671.034000] CPU: Hyper-Threading is disabled
[4294671.034000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
[4294671.034000] Intel machine check architecture supported.
[4294671.034000] Intel machine check reporting enabled on CPU#0.
[4294671.034000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[4294671.034000] CPU0: Thermal monitoring enabled
[4294671.034000] Enabling fast FPU save and restore... done.
[4294671.034000] Enabling unmasked SIMD FPU exception support... done.
[4294671.034000] Checking 'hlt' instruction... OK.
[4294671.038000] checking if image is initramfs... it is
[4294671.505000] Freeing initrd memory: 5568k freed
[4294671.505000] ACPI: Looking for DSDT in initrd... not found!
[4294671.550000] not found!
[4294672.222000] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[4294672.222000] Booting processor 1/1 eip 3000
[4294672.232000] Initializing CPU#1
[4294672.233000] Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080)
[4294672.256000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294672.256000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294672.256000] monitor/mwait feature present.
[4294672.256000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294672.256000] CPU: L2 cache: 1024K
[4294672.256000] CPU: Hyper-Threading is disabled
[4294672.256000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
[4294672.256000] Intel machine check architecture supported.
[4294672.256000] Intel machine check reporting enabled on CPU#1.
[4294672.256000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[4294672.256000] CPU1: Thermal monitoring enabled
[4294672.256000] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[4294672.256000] Total of 2 processors activated (11927.55 BogoMIPS).
[4294672.256000] ENABLING IO-APIC IRQs
[4294672.256000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294672.367000] checking TSC synchronization across 2 CPUs: passed.
[4294672.368000] Brought up 2 CPUs
[4294672.368000] CPU0 attaching sched-domain:
[4294672.368000] domain 0: span 01
[4294672.368000] groups: 01
[4294672.368000] domain 1: span 03
[4294672.368000] groups: 01 02
[4294672.368000] CPU1 attaching sched-domain:
[4294672.368000] domain 0: span 02
[4294672.368000] groups: 02
[4294672.368000] domain 1: span 03
[4294672.368000] groups: 02 01
[4294672.368000] NET: Registered protocol family 16
[4294672.368000] ACPI: bus type pci registered
[4294672.368000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[4294672.368000] PCI: Using configuration type 1
[4294672.368000] mtrr: v2.0 (20020519)
[4294672.369000] ACPI: Subsystem revision 20050729
[4294672.377000] ACPI: Interpreter enabled
[4294672.377000] ACPI: Using IOAPIC for interrupt routing
[4294672.378000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294672.378000] PCI: Probing PCI hardware (bus 00)
[4294672.378000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294672.381000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294672.382000] Boot video device is 0000:01:00.0
[4294672.382000] PCI: Transparent bridge - 0000:00:1e.0
[4294672.390000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.390000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[4294672.398000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.398000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.398000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.398000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.399000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.399000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294672.399000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.399000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294672.399000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.399000] pnp: PnP ACPI init
[4294672.404000] pnp: PnP ACPI: found 13 devices
[4294672.404000] ASUS P4P800 detected. Disabling PnPBIOS
[4294672.404000] PnPBIOS: Disabled
[4294672.405000] PCI: Using ACPI for IRQ routing
[4294672.405000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294672.410000] pnp: 00:09: ioport range 0x680-0x6ff has been reserved
[4294672.410000] pnp: 00:09: ioport range 0x290-0x297 has been reserved
[4294672.410000] Number of CPUs sharing cache didn't match any known set of CPUs
[4294672.410000] Number of CPUs sharing cache didn't match any known set of CPUs
[4294672.410000] Number of CPUs sharing cache didn't match any known set of CPUs
[4294672.410000] Number of CPUs sharing cache didn't match any known set of CPUs
[4294672.411000] audit: initializing netlink socket (disabled)
[4294672.411000] audit: initialized
[4294672.411000] highmem bounce pool size: 64 pages
[4294672.411000] VFS: Disk quotas dquot_6.5.1
[4294672.411000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.411000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294672.411000] devfs: boot_options: 0x0
[4294672.411000] Initializing Cryptographic API
[4294672.411000] isapnp: Scanning for PnP cards...
[4294672.763000] isapnp: No Plug & Play device found
[4294672.788000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294672.788000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294672.790000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.790000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.790000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294672.790000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.790000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.793000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.793000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.793000] io scheduler noop registered
[4294672.793000] io scheduler anticipatory registered
[4294672.793000] io scheduler deadline registered
[4294672.793000] io scheduler cfq registered
[4294672.793000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.794000] NET: Registered protocol family 2
[4294672.808000] IP: routing cache hash table of 8192 buckets, 64Kbytes
[4294672.808000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[4294672.809000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[4294672.810000] TCP: Hash tables configured (established 262144 bind 65536)
[4294672.810000] NET: Registered protocol family 8
[4294672.810000] NET: Registered protocol family 20
[4294672.810000] ACPI wakeup devices:
[4294672.810000] P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K ILAN
[4294672.810000] ACPI: (supports S0 S1 S3 S4 S5)
[4294672.810000] Freeing unused kernel memory: 204k freed
[4294672.847000] Capability LSM initialized
[4294672.860000] NET: Registered protocol family 1
[4294672.875000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.875000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.875000] ACPI: bus type ide registered
[4294672.883000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294672.883000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294672.883000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294672.883000] ICH5: chipset revision 2
[4294672.883000] ICH5: not 100% native mode: will probe irqs later
[4294672.883000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[4294672.883000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[4294672.883000] Probing IDE interface ide0...
[4294673.073000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294673.148000] hda: Maxtor 6Y120P0, ATA DISK drive
[4294673.404000] hdb: Maxtor 6Y120P0, ATA DISK drive
[4294673.456000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.456000] Probing IDE interface ide1...
[4294674.129000] hdc: MATSHITADVD-ROM SR-8585, ATAPI CD/DVD-ROM drive
[4294674.843000] hdd: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
[4294674.894000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.895000] Probing IDE interface ide2...
[4294675.408000] Probing IDE interface ide3...
[4294675.921000] Probing IDE interface ide4...
[4294676.434000] Probing IDE interface ide5...
[4294676.951000] hda: max request size: 1024KiB
[4294676.958000] hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=16383/255/63, UDMA(100)
[4294676.958000] hda: cache flushes supported
[4294676.958000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3
[4294676.996000] hdb: max request size: 128KiB
[4294676.997000] hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
[4294676.997000] hdb: cache flushes supported
[4294676.997000] /dev/ide/host0/bus0/target1/lun0: p1
[4294677.008000] hdc: ATAPI 40X DVD-ROM drive, 512kB Cache
[4294677.008000] Uniform CD-ROM driver Revision: 3.20
[4294677.010000] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[4294677.488000] Attempting manual resume
[4294677.500000] swsusp: Suspend partition has wrong signature?
[4294677.521000] usbcore: registered new driver usbfs
[4294677.521000] usbcore: registered new driver hub
[4294677.522000] USB Universal Host Controller Interface driver v2.2
[4294677.522000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294677.522000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294677.522000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
[4294677.584000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294677.584000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[4294677.584000] hub 1-0:1.0: USB hub found
[4294677.584000] hub 1-0:1.0: 2 ports detected
[4294677.587000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[4294677.587000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294677.587000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
[4294677.649000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294677.649000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[4294677.649000] hub 2-0:1.0: USB hub found
[4294677.649000] hub 2-0:1.0: 2 ports detected
[4294677.652000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[4294677.652000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294677.652000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3
[4294677.714000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294677.714000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[4294677.714000] hub 3-0:1.0: USB hub found
[4294677.714000] hub 3-0:1.0: 2 ports detected
[4294677.717000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[4294677.717000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294677.717000] uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
[4294677.753000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[4294677.779000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294677.779000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[4294677.779000] hub 4-0:1.0: USB hub found
[4294677.779000] hub 4-0:1.0: 2 ports detected
[4294677.809000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[4294677.809000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294677.809000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
[4294677.809000] ehci_hcd 0000:00:1d.7: debug port 1
[4294677.809000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294677.809000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[4294677.813000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294677.813000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294677.813000] hub 5-0:1.0: USB hub found
[4294677.813000] hub 5-0:1.0: 8 ports detected
[4294677.887000] SCSI subsystem initialized
[4294677.888000] libata version 1.11 loaded.
[4294677.889000] sata_promise version 1.01
[4294677.889000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 23
[4294677.889000] sata_promise PATA port found
[4294677.900000] ata1: SATA max UDMA/133 cmd 0xF8842200 ctl 0xF8842238 bmdma 0x0 irq 23
[4294677.900000] ata2: SATA max UDMA/133 cmd 0xF8842280 ctl 0xF88422B8 bmdma 0x0 irq 23
[4294677.900000] ata3: PATA max UDMA/133 cmd 0xF8842300 ctl 0xF8842338 bmdma 0x0 irq 23
[4294678.101000] ata1: no device found (phy stat 00000000)
[4294678.101000] scsi0 : sata_promise
[4294678.145000] usb 5-2: new high speed USB device using ehci_hcd and address 2
[4294678.302000] ata2: no device found (phy stat 00000000)
[4294678.302000] scsi1 : sata_promise
[4294678.463000] ATA: abnormal status 0x8 on port 0xF884231C
[4294678.463000] ata3: disabling port
[4294678.463000] scsi2 : sata_promise
[4294678.474000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22
[4294678.474000] skge addr 0xfeaf8000 irq 22 chip Yukon-Lite rev 7
[4294678.474000] skge eth0: addr 00:11:2f:d4:94:5c
[4294678.818000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[4294680.509000] usbcore: registered new driver hiddev
[4294680.526000] input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.1-1
[4294680.526000] usbcore: registered new driver usbhid
[4294680.526000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294681.014000] ACPI: CPU0 (power states: C1[C1])
[4294681.014000] ACPI: CPU1 (power states: C1[C1])
[4294681.133000] Attempting manual resume
[4294681.133000] swsusp: Suspend partition has wrong signature?
[4294681.146000] kjournald starting. Commit interval 5 seconds
[4294681.146000] EXT3-fs: mounted filesystem with ordered data mode.
[4294684.399000] Adding 979924k swap on /dev/hda6. Priority:-1 extents:1
[4294684.497000] EXT3 FS on hda7, internal journal
[4294689.053000] parport: PnPBIOS parport detected.
[4294689.053000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294689.139000] lp0: using parport0 (interrupt-driven).
[4294689.157000] mice: PS/2 mouse device common for all mice
[4294689.209000] ieee1394: Initialized config rom entry `ip1394'
[4294689.216000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
[4294689.246000] Linux agpgart interface v0.101 (c) Dave Jones
[4294689.248000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294689.255000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[4294689.255000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294689.255000] [fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0
[4294689.330000] w83627hf 0-0290: Reading VID from GPIO5
[4294692.178000] NTFS driver 2.1.22 [Flags: R/O MODULE].
[4294692.226000] NTFS volume version 3.1.
[4294692.263000] NTFS volume version 3.1.
[4294692.317000] NTFS volume version 3.1.
[4294693.800000] agpgart: Detected an Intel 865 Chipset.
[4294693.806000] agpgart: AGP aperture is 128M @ 0xf0000000
[4294693.916000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294693.924000] shpchp: shpc_init : shpc_cap_offset == 0
[4294693.924000] shpchp: shpc_init : shpc_cap_offset == 0
[4294693.924000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294694.233000] hw_random hardware driver 1.0.0 loaded
[4294694.577000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
[4294694.577000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294694.577000] PCI: Via IRQ fixup for 0000:02:03.0, from 10 to 4
[4294694.636000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048]
[4294694.641000] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 21
[4294694.642000] ohci1394: fw-host1: Unexpected PCI resource length of 1000!
[4294694.694000] ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[feafd000-feafd7ff] Max Packet=[2048]
[4294695.048000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
[4294695.902000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000af035e]
[4294696.163000] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00308d0120dd880d]
[4294696.653000] Real Time Clock Driver v1.12
[4294696.727000] input: PC Speaker
[4294696.892000] Floppy drive(s): fd0 is 1.44M
[4294696.964000] FDC 0 is a post-1991 82077
[4294697.228000] ts: Compaq touchscreen protocol output
[4294697.642000] skge eth0: enabling interface
[4294699.329000] skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx
[4294700.477000] ACPI: Power Button (FF) [PWRF]
[4294700.477000] ACPI: Power Button (CM) [PWRB]
[4294700.565000] ibm_acpi: ec object not found
[4294705.881000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294705.881000] apm: disabled - APM is not SMP safe.
[4294709.125000] NET: Registered protocol family 10
[4294709.125000] Disabled Privacy Extensions on device c0337fa0(lo)
[4294709.125000] IPv6 over IPv4 tunneling driver
[4294719.609000] eth0: no IPv6 routers present
[4294738.934000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294738.934000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294739.015000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294739.015000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294739.530000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294739.530000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294739.601000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294739.601000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294763.482000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294763.482000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294764.161000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294764.161000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294766.269000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294766.269000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294767.744000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294767.744000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294773.356000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4294773.356000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4294773.470000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4294773.470000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. |
) ?
