pb de son sous debian avec une fortissimo

Recherche :

Mot : Pseudo : Filtrer
Bas de page
Auteur	Sujet : pb de son sous debian avec une fortissimo

Tomate

salut, j arrive po faire marcher le son
j ai suivi tous les conseils de lea-linux mais a marche po

j ai bien mis le support de OSS, j ai mis les modules pour le chipset yamaha, j ai installe alsa (qui se lance bien au boot d ailleurs) mais rien ne sort (par exemple a la fin de alsaconf le son ne sort pas)

le pb kan je fais sndconfig c est ke j ai ca :
The following error occurred running the modprobe program:
/lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o:
init_module: No such device
/lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o: insmod
/lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o failed
/lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o: insmod
sound-slot-0 failed

bon bah je suis coince, et je sais po comment arrange ca

Message édité par Tomate le 17-11-2002 à 14:15:43

Publicité

Tux Le Penguin

tomate77 a écrit a écrit :

salut, j arrive po faire marcher le son

j ai suivi tous les conseils de lea-linux mais a marche po

j ai bien mis le support de OSS, j ai mis les modules pour le chipset yamaha, j ai installe alsa (qui se lance bien au boot d ailleurs) mais rien ne sort (par exemple a la fin de alsaconf le son ne sort pas)

le pb kan je fais sndconfig c est ke j ai ca :
The following error occurred running the modprobe program: /lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o: init_module: No such device /lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o: insmod /lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o failed /lib/modules/2.4.18/kernel/drivers/sound/ymfpci.o: insmod sound-slot-0 failed

bon bah je suis coince, et je sais po comment arrange ca

montre le /etc/modules.conf

Tomate

voilou :

Code :

### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep
### update-modules: end processing /etc/modutils/0keep
### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules
# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner
### update-modules: end processing /etc/modutils/actions
### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
### update-modules: end processing /etc/modutils/aliases
### update-modules: start processing /etc/modutils/alsa
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.4.3b ---
alias char-major-116 snd
alias snd-card-0 snd-card-ymfpci
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 snd_device_gid=29 snd_device_uid=0
options snd-card-ymfpci snd_index=0 snd_id=CARD_0
# --- END: Generated by ALSACONF, do not edit. ---
### update-modules: end processing /etc/modutils/alsa
### update-modules: start processing /etc/modutils/alsa-path
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
path=/lib/modules/`uname -r`/alsa
### update-modules: end processing /etc/modutils/alsa-path
### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.
### update-modules: end processing /etc/modutils/paths
### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
### update-modules: end processing /etc/modutils/ppp
### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts serial
alias /dev/tts/0 serial
alias /dev/tts/1 serial
alias /dev/tts/2 serial
alias /dev/tts/3 serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null
### update-modules: end processing /etc/modutils/setserial
### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### update-modules: end processing /etc/modutils/arch/i386

desole, mais c est long comme fichier

:hello:

Tomate

up plz :cry:

Tux Le Penguin

tomate77 a écrit a écrit :

up plz :cry:

dans ce fichier, dès que tu vois ça : snd-card-ymfpci
tu le remplaces par ça : snd-ymfpci
normalement, ça devrait suffire

Tomate

ah bon et pk??

tu peux m expliquer stp

Tux Le Penguin

tomate77 a écrit a écrit :

ah bon et pk??

tu peux m expliquer stp

c'est juste le nom du module
il se sont gourré de nom sur lea
le nom donné, c'est l'ancien nom je crois

Tomate

arf ok

FORUM HardWare.fr

Linux et OS Alternatifs

Débats

pb de son sous debian avec une fortissimo

Sujets relatifs
[Debian] Woody fraichement installée	[Debian Woody]Mon script iptables fonctionne po
[Debian] Ouvrir "au mieux" le port 113 avec iptables, pour l'IRC	openoffice debian
[debian] conflit de librairies ???	problêmes avec xmms sous debian
quelle commande pour lancer k desktop a partir de debian shell	configuration USB + hotplug (debian ou autre)
[debian] pb installation mysql...	Problêmes pour installer debian
Plus de sujets relatifs à : pb de son sous debian avec une fortissimo

Page générée en 0.055 secondes