stecache | Bonjour.
Depuis que mon ordinateur a été coupé violemment par la prise électrique, je n'arrive plus à lancer Windows 7.
Lorsque je lance, mon ordinateur, j'ai 2 choix :
1) Lancer l'outillage de démarrage Windows (recommandé)
2) Démarrer Windows normalement
J'essaie de prendre la 2eme option, or, quand je fais cela, une boucle infinie se crée et le choix change alternativement, il passe de 1 à 2, 2 à 1 et tout cela à l'infini, du coup je ne peux pas faire mon choix.
Est-il possible de résoudre ce problème ?
Au début, j'ai cru que cela venait de mon disque dûr, mais j'ai lancé un DVD burn contenant Ubuntu, j'ai ouvert GSmartControl et apparemment, rien à dire sur le HDD.
Code :
- smartctl 5.43 2012-06-30 r3573 [i686-linux-3.8.0-19-generic] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda (SATA 3Gb/s, 4K Sectors)
- Device Model: ST1000DM003-1CH162
- Serial Number: W1D1V76J
- LU WWN Device Id: 5 000c50 06a7afca3
- Firmware Version: CC47
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ACS-2 (unknown minor revision code: 0x001f)
- Local Time is: Mon Mar 3 14:02:41 2014 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 575) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 109) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 76473392
- 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 224
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 49657550
- 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 882
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 221
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
- 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
- 190 Airflow_Temperature_Cel 0x0022 071 065 045 Old_age Always - 29 (0 3 29 26 0)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 78
- 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 237
- 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (128 0 0 0 0)
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 256924943647608
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 5129232756
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 6499402000
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|