Salut a tous
J ai une carte graphique gigabyte ati 9600pro 128 mo ddr,
le probleme c est que j arrive pas a la configure. J ai telecharger power strip et voici le rapport de diagnostique:
Diagnostic report - generated on 16/10/2003
------------------------------------------------------------------------------
PowerStrip build - 422
Windows build - v.5.1.2600.2.Service Pack 1
DirectX build - v.5.3.0000000.900 built by: DIRECTX
OpenGL renderer - (n/a)
System board
------------------------------------------------------------------------------
Type - NVidia nVidia-nForce-6A61BA1BC-18
BIOS - Phoenix-Award Bios, 07/24/2003
AGP aperture - 256 MB
AGP transfer mechanism - Désactivé
AGP non-local memory - (n/a)
AGP revision - 3.00
AGP transfer rates supported - 4x, 8x
Current AGP transfer rate - 4x
Sideband addressing - hardware support, but currently disabled
Fast write protocol - hardware support, but currently disabled
AGP texturing - hardware support, but currently disabled
Graphics card #1
------------------------------------------------------------------------------
Identity - RADEON 9600 SERIES
Memory clock - 297,00 MHz
Engine clock - 398,25 MHz
IRQ - 19, not shared
AGP revision - 3.00
AGP transfer rates supported - 4x, 8x
Current AGP transfer rate - (n/a)
Sideband addressing - Enabled
Display driver - ati2dvag.dll, v.6.14.10.6387
DirectX driver - ati2dvag.dll, v.6.14.10.6387
Attached monitor - Écran Plug-and-Play (Microsoft)
Monitor caps (1) - 1600x1200, 75kHz, 85Hz
Device enumeration
------------------------------------------------------------------------------
RADEON 9600 SERIES (41501002h) - using IRQ19
Giga-Byte Display controller (41701002h)
Abit CPU-to-PCI/AGP bridge (01E010DEh)
NVidia RAM controller (01EB10DEh)
NVidia RAM controller (01EE10DEh)
NVidia RAM controller (01ED10DEh)
NVidia RAM controller (01EC10DEh)
NVidia RAM controller (01EF10DEh)
Abit PCI-to-ISA bridge (006010DEh)
Abit SMBus (006410DEh) - using IRQ11
Abit Universal serial bus (USB) (006710DEh) - using IRQ22
Abit Universal serial bus (USB) (006710DEh) - using IRQ20
Abit Universal serial bus (USB) (006810DEh) - using IRQ21
Abit Ethernet controller (006610DEh) - using IRQ22
Abit Audio device (006B10DEh) - using IRQ20
Abit Audio device (006A10DEh) - using IRQ21
NVidia PCI-to-PCI/AGP bridge (006C10DEh)
Abit IDE controller (006510DEh)
Abit Firewire bus (006E10DEh) - using IRQ21
NVidia PCI-to-PCI/AGP bridge (01E810DEh)
Donc power strip me dit que j ai plein de fonction qui ne sont pas activés ! comment les activer?
De plus je comprend pas pourquoi il detecte ma carte en AGP 4X puisque dans le bios elle est reglé sur 8x!
Merci de votre aide
