mick8569 | J'utilise norton 2005 comme firewall
Contenu du hhtttpd.conf (sans les commentaires...):
Code :
- #------------------------ IMPORTANT ! ----------------------
- # This file is GENERATED by EasyPHP when needed so edit the
- # file C:\Program Files\EasyPHP1-8\conf_files\httpd.conf if you want to do
- # modifications in this file
- #-----------------------------------------------------------
- # IMPORTANT
- # C:/Program Files/EasyPHP1-8 is used to specify EasyPHP installation path
- #
- # Based upon the NCSA server configuration files originally by Rob McCool.
- #
- # This is the main Apache server configuration file. It contains the
- # configuration directives that give the server its instructions.
- # See <URL:http://www.apache.org/docs/> for detailed information about
- # the directives.
- #
- # Do NOT simply read the instructions in here without understanding
- # what they do. They're here only as hints or reminders. If you are unsure
- # consult the online docs. You have been warned.
- #
- # After this file is processed, the server will look for and process
- # srm.conf and then access.conf
- # unless you have overridden these with ResourceConfig and/or
- # AccessConfig directives here.
- #
- # The configuration directives are grouped into three basic sections:
- # 1. Directives that control the operation of the Apache server process as a
- # whole (the 'global environment').
- # 2. Directives that define the parameters of the 'main' or 'default' server,
- # which responds to requests that aren't handled by a virtual host.
- # These directives also provide default values for the settings
- # of all virtual hosts.
- # 3. Settings for virtual hosts, which allow Web requests to be sent to
- # different IP addresses or hostnames and have them handled by the
- # same Apache server process.
- #
- # Configuration and logfile names: If the filenames you specify for many
- # of the server's control files begin with "/" (or "drive:/" for Win32), the
- # server will use that explicit path. If the filenames do *not* begin
- # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
- # with ServerRoot set to "/usr/local/apache" will be interpreted by the
- # server as "/usr/local/apache/logs/foo.log".
- #
- # NOTE: Where filenames are specified, you must use forward slashes
- # instead of backslashes (e.g., "c:/apache" instead of "c:\apache" ).
- # If a drive letter is omitted, the drive on which Apache.exe is located
- # will be used by default. It is recommended that you always supply
- # an explicit drive letter in absolute paths, however, to avoid
- # confusion.
- #
- ### Section 1: Global Environment
- #
- # The directives in this section affect the overall operation of Apache,
- # such as the number of concurrent requests it can handle or where it
- # can find its configuration files.
- #
- #
- # ServerType is either inetd, or standalone. Inetd mode is only supported on
- # Unix platforms.
- #
- ServerType standalone
- #
- # ServerRoot: The top of the directory tree under which the server's
- # configuration, error, and log files are kept.
- #
- ServerRoot "C:/Program Files/EasyPHP1-8/apache"
- #
- # PidFile: The file in which the server should record its process
- # identification number when it starts.
- #
- PidFile logs/httpd.pid
- #
- # ScoreBoardFile: File used to store internal server process information.
- # Not all architectures require this. But if yours does (you'll know because
- # this file will be created when you run Apache) then you *must* ensure that
- # no two invocations of Apache share the same scoreboard file.
- #
- ScoreBoardFile logs/apache_runtime_status
- #
- # In the standard configuration, the server will process httpd.conf (this
- # file, specified by the -f command line option), srm.conf, and access.conf
- # in that order. The latter two files are now distributed empty, as it is
- # recommended that all directives be kept in a single file for simplicity.
- # The commented-out values below are the built-in defaults. You can have the
- # server ignore these files altogether by using "/dev/null" (for Unix) or
- # "nul" (for Win32) for the arguments to the directives.
- #
- #ResourceConfig conf/srm.conf
- #AccessConfig conf/access.conf
- #
- # Timeout: The number of seconds before receives and sends time out.
- #
- Timeout 300
- #
- # KeepAlive: Whether or not to allow persistent connections (more than
- # one request per connection). Set to "Off" to deactivate.
- #
- KeepAlive On
- #
- # MaxKeepAliveRequests: The maximum number of requests to allow
- # during a persistent connection. Set to 0 to allow an unlimited amount.
- # We recommend you leave this number high, for maximum performance.
- #
- MaxKeepAliveRequests 100
- #
- # KeepAliveTimeout: Number of seconds to wait for the next request from the
- # same client on the same connection.
- #
- KeepAliveTimeout 15
- #
- # Apache on Win32 always creates one child process to handle requests. If it
- # dies, another child process is created automatically. Within the child
- # process multiple threads handle incoming requests. The next two
- # directives control the behaviour of the threads and processes.
- #
- #
- # MaxRequestsPerChild: the number of requests each child process is
- # allowed to process before the child dies. The child will exit so
- # as to avoid problems after prolonged use when Apache (and maybe the
- # libraries it uses) leak memory or other resources. On most systems, this
- # isn't really needed, but a few (such as Solaris) do have notable leaks
- # in the libraries. For Win32, set this value to zero (unlimited)
- # unless advised otherwise.
- #
- # NOTE: This value does not include keepalive requests after the initial
- # request per connection. For example, if a child process handles
- # an initial request and 10 subsequent "keptalive" requests, it
- # would only count as 1 request towards this limit.
- #
- MaxRequestsPerChild 0
- #
- # Number of concurrent threads (i.e., requests) the server will allow.
- # Set this value according to the responsiveness of the server (more
- # requests active at once means they're all handled more slowly) and
- # the amount of system resources you'll allow the server to consume.
- #
- ThreadsPerChild 50
- #
- # Listen: Allows you to bind Apache to specific IP addresses and/or
- # ports, in addition to the default. See also the <VirtualHost>
- # directive.
- #
- #Listen 3000
- #Listen 12.34.56.78:80
- Listen 127.0.0.1:80
- Listen 169.254.122.55:80
- Listen 172.211.162.128:80
- #
- # BindAddress: You can support virtual hosts with this option. This directive
- # is used to tell the server which IP address to listen to. It can either
- # contain "*", an IP address, or a fully qualified Internet domain name.
- # See also the <VirtualHost> and Listen directives.
- #
- #BindAddress *
- #
- # Dynamic Shared Object (DSO) Support
- #
- # To be able to use the functionality of a module which was built as a DSO you
- # have to place corresponding `LoadModule' lines at this location so the
- # directives contained in it are actually available _before_ they are used.
- # Please read the file README.DSO in the Apache 1.3 distribution for more
- # details about the DSO mechanism and run `apache -l' for the list of already
- # built-in (statically linked and thus always available) modules in your Apache
- # binary.
- #
- # Note: The order in which modules are loaded is important. Don't change
- # the order below without expert advice.
- #
- # Example:
- # LoadModule foo_module modules/mod_foo.so
- #
- #LoadModule vhost_alias_module modules/mod_vhost_alias.so
- #LoadModule mime_magic_module modules/mod_mime_magic.so
- #LoadModule status_module modules/mod_status.so
- #LoadModule info_module modules/mod_info.so
- #LoadModule speling_module modules/mod_speling.so
- #LoadModule rewrite_module modules/mod_rewrite.so
- LoadModule anon_auth_module modules/mod_auth_anon.so
- #LoadModule dbm_auth_module modules/mod_auth_dbm.so
- #LoadModule digest_auth_module modules/mod_auth_digest.so
- #LoadModule digest_module modules/mod_digest.so
- #LoadModule proxy_module modules/mod_proxy.so
- #LoadModule cern_meta_module modules/mod_cern_meta.so
- #LoadModule expires_module modules/mod_expires.so
- #LoadModule headers_module modules/mod_headers.so
- #LoadModule usertrack_module modules/mod_usertrack.so
- #LoadModule unique_id_module modules/mod_unique_id.so
- LoadModule php4_module "C:/Program Files/EasyPHP1-8/php/php4apache.dll"
- #
- # Reconstruction of the complete module list from all available modules
- # (static and shared ones) to achieve correct module execution order.
- #
- # The modules listed below, without a corresponding LoadModule directive,
- # are static bound into the standard Apache binary distribution for Windows.
- #
- # Note: The order in which modules are loaded is important. Don't change
- # the order below without expert advice.
- #
- # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE, UPDATE THIS TOO!]
- ClearModuleList
- #AddModule mod_vhost_alias.c
- AddModule mod_env.c
- AddModule mod_log_config.c
- #AddModule mod_mime_magic.c
- AddModule mod_mime.c
- AddModule mod_negotiation.c
- #AddModule mod_status.c
- #AddModule mod_info.c
- AddModule mod_include.c
- AddModule mod_autoindex.c
- AddModule mod_dir.c
- AddModule mod_isapi.c
- AddModule mod_cgi.c
- AddModule mod_asis.c
- AddModule mod_imap.c
- AddModule mod_actions.c
- #AddModule mod_speling.c
- AddModule mod_userdir.c
- AddModule mod_alias.c
- #AddModule mod_rewrite.c
- AddModule mod_access.c
- AddModule mod_auth.c
- AddModule mod_auth_anon.c
- #AddModule mod_auth_dbm.c
- #AddModule mod_auth_digest.c
- #AddModule mod_digest.c
- #AddModule mod_proxy.c
- #AddModule mod_cern_meta.c
- #AddModule mod_expires.c
- #AddModule mod_headers.c
- #AddModule mod_usertrack.c
- #AddModule mod_unique_id.c
- AddModule mod_so.c
- AddModule mod_setenvif.c
- AddModule mod_php4.c
- #
- # ExtendedStatus controls whether Apache will generate "full" status
- # information (ExtendedStatus On) or just basic information (ExtendedStatus
- # Off) when the "server-status" handler is called. The default is Off.
- #
- #ExtendedStatus On
- ### Section 2: 'Main' server configuration
- #
- # The directives in this section set up the values used by the 'main'
- # server, which responds to any requests that aren't handled by a
- # <VirtualHost> definition. These values also provide defaults for
- # any <VirtualHost> containers you may define later in the file.
- #
- # All of these directives may appear inside <VirtualHost> containers,
- # in which case these default settings will be overridden for the
- # virtual host being defined.
- #
- #
- # Port: The port to which the standalone server listens. Certain firewall
- # products must be configured before Apache can listen to a specific port.
- # Other running httpd servers will also interfere with this port. Disable
- # all firewall, security, and other services if you encounter problems.
- # To help diagnose problems use the Windows NT command NETSTAT -a
- #
- Port 80
- #
- # ServerAdmin: Your address, where problems with the server should be
- # e-mailed. This address appears on some server-generated pages, such
- # as error documents.
- #
- ServerAdmin admin@localhost
- #
- # ServerName allows you to set a host name which is sent back to clients for
- # your server if it's different than the one the program would get (i.e., use
- # "www" instead of the host's real name).
- #
- # Note: You cannot just invent host names and hope they work. The name you
- # define here must be a valid DNS name for your host. If you don't understand
- # this, ask your network administrator.
- # If your host doesn't have a registered DNS name, enter its IP address here.
- # You will have to access it by its address (e.g., http://123.45.67.89/)
- # anyway, and this will make redirections work in a sensible way.
- #
- # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
- # machine always knows itself by this address. If you use Apache strictly for
- # local testing and development, you may use 127.0.0.1 as the server name.
- #
- ServerName localhost
- #
- # DocumentRoot: The directory out of which you will serve your
- # documents. By default, all requests are taken from this directory, but
- # symbolic links and aliases may be used to point to other locations.
- #
- DocumentRoot "C:/Program Files/EasyPHP1-8/www"
- #
- # Each directory to which Apache has access, can be configured with respect
- # to which services and features are allowed and/or disabled in that
- # directory (and its subdirectories).
- #
- # First, we configure the "default" to be a very restrictive set of
- # permissions.
- #
- <Directory />
- Options FollowSymLinks Indexes
- AllowOverride All
- </Directory>
- #
- # Note that from this point forward you must specifically allow
- # particular features to be enabled - so if something's not working as
- # you might expect, make sure that you have specifically enabled it
- # below.
- #
- #
- # This should be changed to whatever you set DocumentRoot to.
- #
- <Directory "C:/Program Files/EasyPHP1-8/www">
- #
- # This may also be "None", "All", or any combination of "Indexes",
- # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
- #
- # Note that "MultiViews" must be named *explicitly* --- "Options All"
- # doesn't give it to you.
- #
- Options Indexes FollowSymLinks Includes
- #
- # This controls which options the .htaccess files in directories can
- # override. Can also be "All", or any combination of "Options", "FileInfo",
- # "AuthConfig", and "Limit"
- #
- AllowOverride All
- #
- # Controls who can get stuff from this server.
- #
- Order allow,deny
- Allow from all
- </Directory>
- #
- # UserDir: The name of the directory which is appended onto a user's home
- # directory if a ~user request is received.
- #
- # Under Win32, we do not currently try to determine the home directory of
- # a Windows login, so a format such as that below needs to be used. See
- # the UserDir documentation for details.
- #
- <IfModule mod_userdir.c>
- UserDir "C:/Program Files/EasyPHP1-8/apache/users/"
- </IfModule>
- #
- # Control access to UserDir directories. The following is an example
- # for a site where these directories are restricted to read-only.
- #
- #<Directory "C:/Program Files/EasyPHP1-8/apache/users">
- # AllowOverride FileInfo AuthConfig Limit
- # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
- # <Limit GET POST OPTIONS PROPFIND>
- # Order allow,deny
- # Allow from all
- # </Limit>
- # <LimitExcept GET POST OPTIONS PROPFIND>
- # Order deny,allow
- # Deny from all
- # </LimitExcept>
- #</Directory>
- #
- # DirectoryIndex: Name of the file or files to use as a pre-written HTML
- # directory index. Separate multiple entries with spaces.
- #
- <IfModule mod_dir.c>
- DirectoryIndex index.html index.shtml index.wml index.pwml index.php index.php3 index.php4
- </IfModule>
- #
- # AccessFileName: The name of the file to look for in each directory
- # for access control information.
- #
- AccessFileName .htaccess
- #
- # The following lines prevent .htaccess files from being viewed by
- # Web clients. Since .htaccess files often contain authorization
- # information, access is disallowed for security reasons. Comment
- # these lines out if you want Web visitors to see the contents of
- # .htaccess files. If you change the AccessFileName directive above,
- # be sure to make the corresponding changes here.
- #
- # Also, folks tend to use names such as .htpasswd for password
- # files, so this will protect those as well.
- #
- <Files ~ "^\.ht">
- Order allow,deny
- Deny from all
- Satisfy All
- </Files>
- #
- # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
- # document that was negotiated on the basis of content. This asks proxy
- # servers not to cache the document. Uncommenting the following line disables
- # this behavior, and proxies will be allowed to cache the documents.
- #
- #CacheNegotiatedDocs
- #
- # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
- # Apache needs to construct a self-referencing URL (a URL that refers back
- # to the server the response is coming from) it will use ServerName and
- # Port to form a "canonical" name. With this setting off, Apache will
- # use the hostname:port that the client supplied, when possible. This
- # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
- #
- UseCanonicalName Off
- #
- # TypesConfig describes where the mime.types file (or equivalent) is
- # to be found.
- #
- <IfModule mod_mime.c>
- TypesConfig conf/mime.types
- </IfModule>
- #
- # DefaultType is the default MIME type the server will use for a document
- # if it cannot otherwise determine one, such as from filename extensions.
- # If your server contains mostly text or HTML documents, "text/plain" is
- # a good value. If most of your content is binary, such as applications
- # or images, you may want to use "application/octet-stream" instead to
- # keep browsers from trying to display binary files as though they are
- # text.
- #
- DefaultType text/plain
- #
- # The mod_mime_magic module allows the server to use various hints from the
- # contents of the file itself to determine its type. The MIMEMagicFile
- # directive tells the module where the hint definitions are located.
- # mod_mime_magic is not part of the default server (you have to add
- # it yourself with a LoadModule [see the DSO paragraph in the 'Global
- # Environment' section], or recompile the server and include mod_mime_magic
- # as part of the configuration), so it's enclosed in an <IfModule> container.
- # This means that the MIMEMagicFile directive will only be processed if the
- # module is part of the server.
- #
- <IfModule mod_mime_magic.c>
- MIMEMagicFile conf/magic
- </IfModule>
- #
- # HostnameLookups: Log the names of clients or just their IP addresses
- # e.g., www.apache.org (on) or 204.62.129.132 (off).
- # The default is off because it'd be overall better for the net if people
- # had to knowingly turn this feature on, since enabling it means that
- # each client request will result in AT LEAST one lookup request to the
- # nameserver.
- #
- HostnameLookups Off
- #
- # ErrorLog: The location of the error log file.
- # If you do not specify an ErrorLog directive within a <VirtualHost>
- # container, error messages relating to that virtual host will be
- # logged here. If you *do* define an error logfile for a <VirtualHost>
- # container, that host's errors will be logged there and not here.
- #
- ErrorLog logs/error.log
- #
- # LogLevel: Control the number of messages logged to the error.log.
- # Possible values include: debug, info, notice, warn, error, crit,
- # alert, emerg.
- #
- LogLevel warn
- #
- # The following directives define some format nicknames for use with
- # a CustomLog directive (see below).
- #
- LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
- LogFormat "%h %l %u %t \"%r\" %>s %b" common
- LogFormat "%{Referer}i -> %U" referer
- LogFormat "%{User-agent}i" agent
- #
- # The location and format of the access logfile (Common Logfile Format).
- # If you do not define any access logfiles within a <VirtualHost>
- # container, they will be logged here. Contrariwise, if you *do*
- # define per-<VirtualHost> access logfiles, transactions will be
- # logged therein and *not* in this file.
- #
- CustomLog logs/access.log common
- #
- # If you would like to have agent and referer logfiles, uncomment the
- # following directives.
- #
- #CustomLog logs/referer.log referer
- #CustomLog logs/agent.log agent
- #
- # If you prefer a single logfile with access, agent, and referer information
- # (Combined Logfile Format) you can use the following directive.
- #
- #CustomLog logs/access.log combined
- #
- # Optionally add a line containing the server version and virtual host
- # name to server-generated pages (error documents, FTP directory listings,
- # mod_status and mod_info output etc., but not CGI generated documents).
- # Set to "EMail" to also include a mailto: link to the ServerAdmin.
- # Set to one of: On | Off | EMail
- #
- ServerSignature Email
- #
- # Apache parses all CGI scripts for the shebang line by default.
- # This comment line, the first line of the script, consists of the symbols
- # pound (#) and exclamation (!) followed by the path of the program that
- # can execute this specific script. For a perl script, with perl.exe in
- # the C:\Program Files\Perl directory, the shebang line should be:
- #!c:/program files/perl/perl
- # Note you _must_not_ indent the actual shebang line, and it must be the
- # first line of the file. Of course, CGI processing must be enabled by
- # the appropriate ScriptAlias or Options ExecCGI directives for the files
- # or directory in question.
- #
- # However, Apache on Windows allows either the Unix behavior above, or can
- # use the Registry to match files by extention. The command to execute
- # a file of this type is retrieved from the registry by the same method as
- # the Windows Explorer would use to handle double-clicking on a file.
- # These script actions can be configured from the Windows Explorer View menu,
- # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
- # button allows you to modify the Actions, of which Apache 1.3 attempts to
- # perform the 'Open' Action, and failing that it will try the shebang line.
- # This behavior is subject to change in Apache release 2.0.
- #
- # Each mechanism has it's own specific security weaknesses, from the means
- # to run a program you didn't intend the website owner to invoke, and the
- # best method is a matter of great debate.
- #
- # To enable the this Windows specific behavior (and therefore -disable- the
- # equivilant Unix behavior), uncomment the following directive:
- #
- #ScriptInterpreterSource registry
- #
- # The directive above can be placed in individual <Directory> blocks or the
- # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
- # (Unix behavior) option, and will override this server default option.
- #
- #
- # Aliases: Add here as many aliases as you need (with no limit). The format is
- # Alias fakename realname
- #
- <IfModule mod_alias.c>
- #
- # Note that if you include a trailing / on fakename then the server will
- # require it to be present in the URL. So "/icons" isn't aliased in this
- # example, only "/icons/". If the fakename is slash-terminated, then the
- # realname must also be slash terminated, and if the fakename omits the
- # trailing slash, the realname must also omit it.
- #
- Alias /icons/ "C:/Program Files/EasyPHP1-8/apache/icons/"
- <Directory "C:/Program Files/EasyPHP1-8/apache/icons">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
- Alias /images_easyphp/ "C:/Program Files/EasyPHP1-8/home/images_easyphp/"
- <Directory "C:/Program Files/EasyPHP1-8/home/images_easyphp">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
- Alias /mysql/ "C:/Program Files/EasyPHP1-8/phpmyadmin/"
- <Directory "C:/Program Files/EasyPHP1-8/phpmyadmin">
- Options FollowSymLinks Indexes
- AllowOverride None
- Order deny,allow
- allow from 127.0.0.1
- deny from all
- </Directory>
- Alias /home/ "C:/Program Files/EasyPHP1-8/home/"
- <Directory "C:/Program Files/EasyPHP1-8/home">
- Options FollowSymLinks Indexes
- AllowOverride None
- Order deny,allow
- allow from 127.0.0.1
- deny from all
- </Directory>
- # This Alias will project the on-line documentation tree under /manual/
- # even if you change the DocumentRoot. Comment it if you don't want to
- # provide access to the on-line documentation.
- #
- #Alias /manual/ "C:/Program Files/EasyPHP1-8/apache/htdocs/manual/"
- #<Directory "C:/Program Files/EasyPHP1-8/apache/htdocs/manual">
- # Options Indexes FollowSymlinks MultiViews
- # AllowOverride None
- # Order allow,deny
- # Allow from all
- #</Directory>
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the realname directory are treated as applications and
- # run by the server when requested rather than as documents sent to the client.
- # The same rules about trailing "/" apply to ScriptAlias directives as to
- # Alias.
- #
- ScriptAlias /cgi-bin/ "C:/Program Files/EasyPHP1-8/cgi-bin/"
- #
- # "C:/Program Files/EasyPHP1-8/apache/cgi-bin" should be changed to whatever your ScriptAliased
- # CGI directory exists, if you have that configured.
- #
- <Directory "C:/Program Files/EasyPHP1-8/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
- </IfModule>
- # End of aliases.
- #
- # Redirect allows you to tell clients about documents which used to exist in
- # your server's namespace, but do not anymore. This allows you to tell the
- # clients where to look for the relocated document.
- # Format: Redirect old-URI new-URL
- #
- #
- # Directives controlling the display of server-generated directory listings.
- #
- <IfModule mod_autoindex.c>
- #
- # FancyIndexing is whether you want fancy directory indexing or standard
- #
- # Note, add the option TrackModified to the IndexOptions default list only
- # if all indexed directories reside on NTFS volumes. The TrackModified flag
- # will report the Last-Modified date to assist caches and proxies to properly
- # track directory changes, but it does _not_ work on FAT volumes.
- #
- IndexOptions FancyIndexing
- #
- # AddIcon* directives tell the server which icon to show for different
- # files or filename extensions. These are only displayed for
- # FancyIndexed directories.
- #
- AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
- AddIconByType (TXT,/icons/text.gif) text/*
- AddIconByType (IMG,/icons/image2.gif) image/*
- AddIconByType (SND,/icons/sound2.gif) audio/*
- AddIconByType (VID,/icons/movie.gif) video/*
-
- AddIcon /icons/binary.gif .bin .exe
- AddIcon /icons/binhex.gif .hqx
- AddIcon /icons/tar.gif .tar
- AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
- AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
- AddIcon /icons/a.gif .ps .ai .eps
- AddIcon /icons/layout.gif .html .shtml .htm .pdf
- AddIcon /icons/text.gif .txt
- AddIcon /icons/c.gif .c
- AddIcon /icons/p.gif .pl .py
- AddIcon /icons/f.gif .for
- AddIcon /icons/dvi.gif .dvi
- AddIcon /icons/uuencoded.gif .uu
- AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
- AddIcon /icons/tex.gif .tex
- AddIcon /icons/bomb.gif core
-
- AddIcon /icons/back.gif ..
- AddIcon /icons/hand.right.gif README
- AddIcon /icons/folder.gif ^^DIRECTORY^^
- AddIcon /icons/blank.gif ^^BLANKICON^^
-
- #
- # DefaultIcon is which icon to show for files which do not have an icon
- # explicitly set.
- #
- DefaultIcon /icons/unknown.gif
-
- #
- # AddDescription allows you to place a short description after a file in
- # server-generated indexes. These are only displayed for FancyIndexed
- # directories.
- # Format: AddDescription "description" filename
- #
- AddDescription "GZIP compressed document" .gz
- AddDescription "tar archive" .tar
- AddDescription "GZIP compressed tar archive" .tgz
- AddDescription "ZIP archive" .zip
- AddDescription "CAB archive" .cab
- AddDescription "Win32 Executable" .exe
-
- #
- # ReadmeName is the name of the README file the server will look for by
- # default, and append to directory listings.
- #
- # HeaderName is the name of a file which should be prepended to
- # directory indexes.
- #
- # If MultiViews are amongst the Options in effect, the server will
- # first look for name.html and include it if found. If name.html
- # doesn't exist, the server will then look for name.txt and include
- # it as plaintext if found.
- #
- ReadmeName README
- HeaderName HEADER
-
- #
- # IndexIgnore is a set of filenames which directory indexing should ignore
- # and not include in the listing. Shell-style wildcarding is permitted.
- #
- IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
- </IfModule>
- # End of indexing directives.
-
- #
- # Document types.
- #
- <IfModule mod_mime.c>
-
- #
- # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
- # information on the fly. Note: Not all browsers support this.
- # Despite the name similarity, the following Add* directives have nothing
- # to do with the FancyIndexing customization directives above.
- #
- AddEncoding x-compress Z
- AddEncoding x-gzip gz tgz
- #
- # AddLanguage allows you to specify the language of a document. You can
- # then use content negotiation to give a browser a file in a language
- # it can understand.
- #
- # Note 1: The suffix does not have to be the same as the language
- # keyword --- those with documents in Polish (whose net-standard
- # language code is pl) may wish to use "AddLanguage pl .po" to
- # avoid the ambiguity with the common suffix for perl scripts.
- #
- # Note 2: The example entries below illustrate that in quite
- # some cases the two character 'Language' abbreviation is not
- # identical to the two character 'Country' code for its country,
- # E.g. 'Danmark/dk' versus 'Danish/da'.
- #
- # Note 3: In the case of 'ltz' we violate the RFC by using a three char
- # specifier. But there is 'work in progress' to fix this and get
- # the reference data for rfc1766 cleaned up.
- #
- # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
- # French (fr) - German (de) - Greek-Modern (el)
- # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
- # Portugese (pt) - Luxembourgeois* (ltz)
- # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
- # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
- # Russian (ru)
- #
- AddLanguage da .dk
- AddLanguage nl .nl
- AddLanguage en .en
- AddLanguage et .ee
- AddLanguage fr .fr
- AddLanguage de .de
- AddLanguage el .el
- AddLanguage he .he
- AddCharset ISO-8859-8 .iso8859-8
- AddLanguage it .it
- AddLanguage ja .ja
- AddCharset ISO-2022-JP .jis
- AddLanguage kr .kr
- AddCharset ISO-2022-KR .iso-kr
- AddLanguage nn .nn
- AddLanguage no .no
- AddLanguage pl .po
- AddCharset ISO-8859-2 .iso-pl
- AddLanguage pt .pt
- AddLanguage pt-br .pt-br
- AddLanguage ltz .lu
- AddLanguage ca .ca
- AddLanguage es .es
- AddLanguage sv .sv
- AddLanguage cz .cz
- AddLanguage ru .ru
- AddLanguage tw .tw
- AddLanguage zh-tw .tw
- AddCharset Big5 .Big5 .big5
- AddCharset WINDOWS-1251 .cp-1251
- AddCharset CP866 .cp866
- AddCharset ISO-8859-5 .iso-ru
- AddCharset KOI8-R .koi8-r
- AddCharset UCS-2 .ucs2
- AddCharset UCS-4 .ucs4
- AddCharset UTF-8 .utf8
-
- # LanguagePriority allows you to give precedence to some languages
- # in case of a tie during content negotiation.
- #
- # Just list the languages in decreasing order of preference. We have
- # more or less alphabetized them here. You probably want to change this.
- #
- <IfModule mod_negotiation.c>
- LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
- </IfModule>
-
- #
- # AddType allows you to tweak mime.types without actually editing it, or to
- # make certain files to be certain types.
- #
- AddType application/x-tar .tgz
- AddType image/x-icon .ico
- AddType application/vnd.wap.wmlc .wmlc
- AddType application/x-httpd-php .phtml .pwml .php3 .php4 .php .php2 .inc
- AddType text/vnd.wap.wml .wml
- AddType text/vnd.wap.wmlscript .wmls
- AddType text/vnd.wap.wmlscriptc .wmlsc
- AddType image/vnd.wap.wbmp .wbmp
-
- #
- # AddHandler allows you to map certain file extensions to "handlers",
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action command (see below)
- #
- # If you want to use server side includes, or CGI outside
- # ScriptAliased directories, uncomment the following lines.
- #
- # To use CGI scripts:
- #
- AddHandler cgi-script .cgi
-
- #
- # To use server-parsed HTML files
- #
- AddType text/html .shtml
- AddHandler server-parsed .shtml
-
- #
- # Uncomment the following line to enable Apache's send-asis HTTP file
- # feature
- #
- #AddHandler send-as-is asis
-
- #
- # If you wish to use server-parsed imagemap files, use
- #
- #AddHandler imap-file map
-
- #
- # To enable type maps, you might want to use
- #
- #AddHandler type-map var
-
- </IfModule>
- # End of document types.
-
- #
- # Action lets you define media types that will execute a script whenever
- # a matching file is called. This eliminates the need for repeated URL
- # pathnames for oft-used CGI file processors.
- # Format: Action media/type /cgi-script/location
- # Format: Action handler-name /cgi-script/location
- #
-
- #
- # MetaDir: specifies the name of the directory in which Apache can find
- # meta information files. These files contain additional HTTP headers
- # to include when sending the document
- #
- #MetaDir .web
-
- #
- # MetaSuffix: specifies the file name suffix for the file containing the
- # meta information.
- #
- #MetaSuffix .meta
-
- #
- # Customizable error response (Apache style)
- # these come in three flavors
- #
- # 1) plain text
- #ErrorDocument 500 "The server made a boo boo.
- # n.b. the single leading (" ) marks it as text, it does not get output
- #
- # 2) local redirects
- #ErrorDocument 404 /missing.html
- # to redirect to local URL /missing.html
- #ErrorDocument 404 /cgi-bin/missing_handler.pl
- # N.B.: You can redirect to a script or a document using server-side-includes.
- #
- # 3) external redirects
- #ErrorDocument 402 http://some.other-server.com/subscription_info.html
- # N.B.: Many of the environment variables associated with the original
- # request will *not* be available to such a script.
-
- #
- # Customize behaviour based on the browser
- #
- <IfModule mod_setenvif.c>
-
- #
- # The following directives modify normal HTTP response behavior.
- # The first directive disables keepalive for Netscape 2.x and browsers that
- # spoof it. There are known problems with these browser implementations.
- # The second directive is for Microsoft Internet Explorer 4.0b2
- # which has a broken HTTP/1.1 implementation and does not properly
- # support keepalive when it is used on 301 or 302 (redirect) responses.
- #
- BrowserMatch "Mozilla/2" nokeepalive
- BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
- #
- # The following directive disables HTTP/1.1 responses to browsers which
- # are in violation of the HTTP/1.0 spec by not being able to grok a
- # basic 1.1 response.
- #
- BrowserMatch "RealPlayer 4\.0" force-response-1.0
- BrowserMatch "Java/1\.0" force-response-1.0
- BrowserMatch "JDK/1\.0" force-response-1.0
-
- </IfModule>
- # End of browser customization directives
-
- #
- # Allow server status reports, with the URL of http://servername/server-status
- # Change the "localhost" to match your domain to enable.
- #
- #<Location /server-status>
- # SetHandler server-status
- # Order deny,allow
- # Deny from all
- # Allow from localhost
- #</Location>
-
- #
- # Allow remote server configuration reports, with the URL of
- # http://servername/server-info (requires that mod_info.c be loaded).
- # Change the "localhost" to match your domain to enable.
- #
- #<Location /server-info>
- # SetHandler server-info
- # Order deny,allow
- # Deny from all
- # Allow from localhost
- #</Location>
-
- #
- # There have been reports of people trying to abuse an old bug from pre-1.1
- # days. This bug involved a CGI script distributed as a part of Apache.
- # By uncommenting these lines you can redirect these attacks to a logging
- # script on phf.apache.org. Or, you can record them yourself, using the script
- # support/phf_abuse_log.cgi.
- #
- #<Location /cgi-bin/phf*>
- # Deny from all
- # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
- #</Location>
-
- #
- # Proxy Server directives. Uncomment the following lines to
- # enable the proxy server:
- #
- #<IfModule mod_proxy.c>
- # ProxyRequests On
-
- # <Directory proxy:*>
- # Order deny,allow
- # Deny from all
- # Allow from localhost
- # </Directory>
-
- #
- # Enable/disable the handling of HTTP/1.1 "Via:" headers.
- # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
- # Set to one of: Off | On | Full | Block
- #
- # ProxyVia On
-
- #
- # To enable the cache as well, edit and uncomment the following lines:
- # (no cacheing without CacheRoot)
- #
- # CacheRoot "C:/Program Files/Apache Group/Apache/proxy"
- # CacheSize 5
- # CacheGcInterval 4
- # CacheMaxExpire 24
- # CacheLastModifiedFactor 0.1
- # CacheDefaultExpire 1
- # NoCache a-domain.com another-domain.edu joes.garage-sale.com
-
- #</IfModule>
- # End of proxy directives.
-
- ### Section 3: Virtual Hosts
- #
- # VirtualHost: If you want to maintain multiple domains/hostnames on your
- # machine you can setup VirtualHost containers for them. Most configurations
- # use only name-based virtual hosts so the server doesn't need to worry about
- # IP addresses. This is indicated by the asterisks in the directives below.
- #
- # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
- # for further details before you try to setup virtual hosts.
- #
- # You may use the command line option '-S' to verify your virtual host
- # configuration.
-
- #
- # Use name-based virtual hosting.
- #
- #NameVirtualHost *
-
- #
- # VirtualHost example:
- # Almost any Apache directive may go into a VirtualHost container.
- # The first VirtualHost section is used for requests without a known
- # server name.
- #
- #<VirtualHost *>
- # ServerAdmin webmaster@dummy-host.example.com
- # DocumentRoot /www/docs/dummy-host.example.com
- # ServerName dummy-host.example.com
- # ErrorLog logs/dummy-host.example.com-error_log
- # CustomLog logs/dummy-host.example.com-access_log common
- #</VirtualHost>
-
- #alias
- #alias
|
|
) c'est dans la poche
![[:mlc]](https://forum-images.hardware.fr/images/perso/mlc.gif "[:mlc]")