Debian, reconfigurer accès au réseau, problème help!

Recherche :

Mot : Pseudo : Filtrer
Bas de page
Auteur	Sujet : Debian, reconfigurer accès au réseau, problème help!

le rageux

Salut,

j'ai installé Debian sur un vieux ordi qui n'a ni lecteur cd, ni support USB en enlevant le disque dur, en le branchant sur un autre ordi plus récent, en faisant l'install et en le rebranchant sur le vieil ordi. Je boote alors sur mon nouveau Debian fraichement installé [:karma up] . Mon problème c'est que je n'arrive pas à installer le moindre paquet. Il me dit:

Citation :

"Ne parvient pas à résoudre <<ftp.fr.debian.org>>".

En fait il semble qu'il n'arrive pas du tout à accéder à internet. J'imagine que c'est parceque la carte réseau de l'ordi est différente de celle sur l'ordi à partir duquel j'ai fait l'installation sur mon disque dur. Comment reconfigurer l'accès au réseau. J'ai lu le manuel mais il est super long et complexe. help!

Publicité

o'gure

Modérateur
Multi grognon de B_L

que donne un

ifconfig -a

lspci

Message cité 1 fois

agentsteel

tu peux aussi effacer le fichier

/etc/udev/rules.d/70-persistent-net.rules

et redémarrer

(il sera recréé automatiquement)

Message cité 1 fois
Message édité par agentsteel le 07-01-2012 à 15:41:11

---------------
http://agentoss.wordpress.com/

le rageux

o'gure a écrit :

que donne un

ifconfig -a

lspci

voilà:

Code :

ifconfig -a

Code :

lspci

le rageux

agentsteel a écrit :

tu peux aussi effacer le fichier

/etc/udev/rules.d/70-persistent-net.rules

et redémarrer

(il sera recréé automatiquement)

ah? ok, je vais voir

le rageux

bon, bah je viens de le faire (suppression du fichier + reboot) et c'est toujours pareil [:dushnok] :

Citation :

"Ne parvient pas à résoudre <<ftp.fr.debian.org>>".

une autre idée?

Message édité par le rageux le 07-01-2012 à 16:18:58

agentsteel

copier/coller ton dmesg pour voir

et aussi de /etc/network/interfaces

Message cité 1 fois

---------------
http://agentoss.wordpress.com/

le rageux

agentsteel a écrit :

copier/coller ton dmesg pour voir

et aussi de /etc/network/interfaces

# dmesg

Citation :

root@debianhome/murmur# dmesg

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-39) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 04:23:54 UTC 2011

[ 0.000000] KERNEL supported cpus:

[ 0.000000] Intel GenuineIntel

[ 0.000000] AMD AuthenticAMD

[ 0.000000] NSC Geode by NSC

[ 0.000000] Cyrix CyrixInstead

[ 0.000000] Centaur CentaurHauls

[ 0.000000] Transmeta GenuineTMx86

[ 0.000000] Transmeta TransmetaCPU

[ 0.000000] UMC UMC UMC UMC

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)

[ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

[ 0.000000] DMI 2.2 present.

[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-C7FFF write-protect

[ 0.000000] C8000-DFFFF uncachable

[ 0.000000] E0000-EFFFF write-protect

[ 0.000000] F0000-FFFFF uncachable

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask FC0000000 write-back

[ 0.000000] 1 base 040000000 mask FE0000000 write-back

[ 0.000000] 2 base 0E0000000 mask FFC000000 write-combining

[ 0.000000] 3 disabled

[ 0.000000] 4 disabled

[ 0.000000] 5 base 0E0000000 mask FFC000000 write-combining

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] initial memory mapped : 0 - 01800000

[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000

[ 0.000000] 0000000000 - 0000400000 page 4k

[ 0.000000] 0000400000 - 0037000000 page 2M

[ 0.000000] 0037000000 - 00373fe000 page 4k

[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000

[ 0.000000] RAMDISK: 377ac000 - 37fef9b8

[ 0.000000] Allocated new RAMDISK: 00100000 - 009439b8

[ 0.000000] Move RAMDISK from 00000000377ac000 - 0000000037fef9b7 to 00100000 - 009439b7

[ 0.000000] ACPI: RSDP 000f70e0 00014 (v00 KT400 )

[ 0.000000] ACPI: RSDT 5fff3000 0002C (v01 KT400 AWRDACPI 42302E31 AWRD 00000000)

[ 0.000000] ACPI: FACP 5fff3040 00074 (v01 KT400 AWRDACPI 42302E31 AWRD 00000000)

[ 0.000000] ACPI: DSDT 5fff30c0 03D54 (v01 KT400 AWRDACPI 00001000 MSFT 0100000D)

[ 0.000000] ACPI: FACS 5fff0000 00040

[ 0.000000] ACPI: APIC 5fff6e40 00054 (v01 KT400 AWRDACPI 42302E31 AWRD 00000000)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] 651MB HIGHMEM available.

[ 0.000000] 883MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 373fe000

[ 0.000000] low ram: 0 - 373fe000

[ 0.000000] node 0 low ram: 00000000 - 373fe000

[ 0.000000] node 0 bootmap 00012000 - 00018e80

[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]

[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]

[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]

[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]

[ 0.000000] #3 [0001000000 - 00014cccf4] TEXT DATA BSS ==> [0001000000 - 00014cccf4]

[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]

[ 0.000000] #5 [00014cd000 - 00014d30aa] BRK ==> [00014cd000 - 00014d30aa]

[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]

[ 0.000000] #7 [0000100000 - 00009439b8] NEW RAMDISK ==> [0000100000 - 00009439b8]

[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]

[ 0.000000] found SMP MP-table at [c00f5610] f5610

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] Normal 0x00001000 -> 0x000373fe

[ 0.000000] HighMem 0x000373fe -> 0x0005fff0

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[2] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x000000a0

[ 0.000000] 0: 0x00000100 -> 0x0005fff0

[ 0.000000] On node 0 totalpages: 393088

[ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5200

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3952 pages, LIFO batch:0

[ 0.000000] Normal zone: 1736 pages used for memmap

[ 0.000000] Normal zone: 220470 pages, LIFO batch:31

[ 0.000000] HighMem zone: 1304 pages used for memmap

[ 0.000000] HighMem zone: 165594 pages, LIFO batch:31

[ 0.000000] Using APIC driver default

[ 0.000000] ACPI: PM-Timer IO Port: 0x4008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 24

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000

[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000

[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s34328 r0 d23016 u4194304

[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304

[ 0.000000] pcpu-alloc: [0] 0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390016

[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=721f101c-6804-40c3-b338-96f6c0141518 ro quiet

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] Initializing HighMem for node 0 (000373fe:0005fff0)

[ 0.000000] Memory: 1544716k/1572800k available (2504k kernel code, 26608k reserved, 1328k data, 380k init, 667592k highmem)

[ 0.000000] virtual kernel memory layout:

[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)

[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)

[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)

[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)

[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)

[ 0.000000] .data : 0xc1272209 - 0xc13be480 (1328 kB)

[ 0.000000] .text : 0xc1000000 - 0xc1272209 (2504 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] NR_IRQS:1280

[ 0.000000] Console: colour VGA+ 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 1733.872 MHz processor.

[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3467.74 BogoMIPS (lpj=6935488)

[ 0.004039] Security Framework initialized

[ 0.004050] SELinux: Disabled at boot.

[ 0.004062] Mount-cache hash table entries: 512

[ 0.004263] Initializing cgroup subsys ns

[ 0.004268] Initializing cgroup subsys cpuacct

[ 0.004274] Initializing cgroup subsys devices

[ 0.004278] Initializing cgroup subsys freezer

[ 0.004282] Initializing cgroup subsys net_cls

[ 0.004318] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

[ 0.004322] CPU: L2 Cache: 256K (64 bytes/line)

[ 0.004328] mce: CPU supports 4 MCE banks

[ 0.004359] Performance Events: AMD PMU driver.

[ 0.004369] ... version: 0

[ 0.004372] ... bit width: 48

[ 0.004374] ... generic registers: 4

[ 0.004377] ... value mask: 0000ffffffffffff

[ 0.004379] ... max period: 00007fffffffffff

[ 0.004382] ... fixed-purpose events: 0

[ 0.004384] ... event mask: 000000000000000f

[ 0.004390] Checking 'hlt' instruction... OK.

[ 0.020364] SMP alternatives: switching to UP code

[ 0.024571] Freeing SMP alternatives: 13k freed

[ 0.024599] ACPI: Core revision 20090903

[ 0.032155] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.036582] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.076270] CPU0: AMD Athlon(tm) XP 2100+ stepping 00

[ 0.080001] Brought up 1 CPUs

[ 0.080001] Total of 1 processors activated (3467.74 BogoMIPS).

[ 0.080001] CPU0 attaching NULL sched-domain.

[ 0.080001] devtmpfs: initialized

[ 0.080001] regulator: core version 0.5

[ 0.080001] NET: Registered protocol family 16

[ 0.080001] ACPI: bus type pci registered

[ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1

[ 0.080001] PCI: Using configuration type 1 for base access

[ 0.080001] bio: create slab <bio-0> at 0

[ 0.080001] ACPI: EC: Look up EC in DSDT

[ 0.085454] ACPI: Interpreter enabled

[ 0.085460] ACPI: (supports S0 S1 S4 S5)

[ 0.085490] ACPI: Using IOAPIC for interrupt routing

[ 0.090122] ACPI: No dock devices found.

[ 0.090246] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.090308] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]

[ 0.090412] pci 0000:00:01.0: supports D1

[ 0.090457] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]

[ 0.090465] pci 0000:00:0a.0: reg 14 io port: [0xa000-0xa03f]

[ 0.090473] pci 0000:00:0a.0: reg 18 32bit mmio: [0xe4100000-0xe41fffff]

[ 0.090493] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0x000000-0x0fffff]

[ 0.090512] pci 0000:00:0a.0: supports D1 D2

[ 0.090514] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.090520] pci 0000:00:0a.0: PME# disabled

[ 0.090557] pci 0000:00:0c.0: reg 10 io port: [0xa400-0xa41f]

[ 0.090601] pci 0000:00:0c.0: supports D1 D2

[ 0.090635] pci 0000:00:0c.1: reg 10 io port: [0xa800-0xa807]

[ 0.090679] pci 0000:00:0c.1: supports D1 D2

[ 0.090742] pci 0000:00:10.0: reg 20 io port: [0xac00-0xac1f]

[ 0.090769] pci 0000:00:10.0: supports D1 D2

[ 0.090772] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.090777] pci 0000:00:10.0: PME# disabled

[ 0.090832] pci 0000:00:10.1: reg 20 io port: [0xb000-0xb01f]

[ 0.090859] pci 0000:00:10.1: supports D1 D2

[ 0.090862] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.090867] pci 0000:00:10.1: PME# disabled

[ 0.090919] pci 0000:00:10.2: reg 20 io port: [0xb400-0xb41f]

[ 0.090946] pci 0000:00:10.2: supports D1 D2

[ 0.090949] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.090954] pci 0000:00:10.2: PME# disabled

[ 0.090990] pci 0000:00:10.3: reg 10 32bit mmio: [0xe4301000-0xe43010ff]

[ 0.091034] pci 0000:00:10.3: supports D1 D2

[ 0.091037] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091042] pci 0000:00:10.3: PME# disabled

[ 0.091110] HPET not enabled in BIOS. You might try hpet=force boot option

[ 0.091119] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM

[ 0.091123] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB

[ 0.091193] pci 0000:00:11.1: reg 20 io port: [0xb800-0xb80f]

[ 0.091260] pci 0000:00:11.5: reg 10 io port: [0xbc00-0xbcff]

[ 0.091307] pci 0000:00:11.5: supports D1 D2

[ 0.091345] pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]

[ 0.091353] pci 0000:00:12.0: reg 14 32bit mmio: [0xe4302000-0xe43020ff]

[ 0.091394] pci 0000:00:12.0: supports D1 D2

[ 0.091397] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.091402] pci 0000:00:12.0: PME# disabled

[ 0.091459] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]

[ 0.091466] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff]

[ 0.091473] pci 0000:01:00.0: reg 18 32bit mmio: [0xe4020000-0xe402ffff]

[ 0.091489] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]

[ 0.091508] pci 0000:01:00.0: supports D1 D2

[ 0.091539] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]

[ 0.091546] pci 0000:01:00.1: reg 14 32bit mmio: [0xe4030000-0xe403ffff]

[ 0.091576] pci 0000:01:00.1: supports D1 D2

[ 0.091621] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]

[ 0.091626] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe40fffff]

[ 0.091632] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xdfffffff]

[ 0.091641] pci_bus 0000:00: on NUMA node 0

[ 0.091647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.112729] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)

[ 0.112933] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)

[ 0.113138] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)

[ 0.113343] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)

[ 0.113544] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0

[ 0.113738] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0

[ 0.113956] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0

[ 0.114149] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0

[ 0.114311] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.114316] vgaarb: loaded

[ 0.114441] PCI: Using ACPI for IRQ routing

[ 0.114654] Switching to clocksource tsc

[ 0.116001] pnp: PnP ACPI init

[ 0.116001] ACPI: bus type pnp registered

[ 0.116001] pnp 00:00: mem resource (0xd1800-0xd3fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling

[ 0.116001] pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling

[ 0.116001] pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling

[ 0.116001] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling

[ 0.116001] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling

[ 0.117481] pnp: PnP ACPI: found 12 devices

[ 0.117484] ACPI: ACPI bus type pnp unregistered

[ 0.117490] PnPBIOS: Disabled by ACPI PNP

[ 0.117507] system 00:00: iomem range 0x5fff0000-0x5fffffff could not be reserved

[ 0.117512] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved

[ 0.117517] system 00:00: iomem range 0x100000-0x5ffeffff could not be reserved

[ 0.117521] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved

[ 0.117526] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.117530] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved

[ 0.117539] system 00:02: ioport range 0x4d0-0x4d1 has been reserved

[ 0.117543] system 00:02: ioport range 0x294-0x297 has been reserved

[ 0.152389] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.152394] pci 0000:00:01.0: IO window: 0x9000-0x9fff

[ 0.152401] pci 0000:00:01.0: MEM window: 0xe4000000-0xe40fffff

[ 0.152407] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xdfffffff

[ 0.152426] pci 0000:00:01.0: setting latency timer to 64

[ 0.152433] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[ 0.152436] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]

[ 0.152440] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]

[ 0.152444] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe40fffff]

[ 0.152448] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff]

[ 0.152503] NET: Registered protocol family 2

[ 0.152633] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.153238] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.155310] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.156338] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.156344] TCP reno registered

[ 0.156498] NET: Registered protocol family 1

[ 0.156527] pci 0000:00:01.0: disabling DAC on VIA PCI bridge

[ 0.156559] pci 0000:00:0a.0: Firmware left e100 interrupts enabled; disabling

[ 0.156627] pci 0000:01:00.0: Boot video device

[ 0.156716] Unpacking initramfs...

[ 0.449920] Freeing initrd memory: 8462k freed

[ 0.465188] audit: initializing netlink socket (disabled)

[ 0.465211] type=2000 audit(1325915344.461:1): initialized

[ 0.469288] highmem bounce pool size: 64 pages

[ 0.469296] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 0.471361] VFS: Disk quotas dquot_6.5.2

[ 0.471443] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.471542] msgmni has been set to 1731

[ 0.471829] alg: No test for stdrng (krng)

[ 0.471868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.471873] io scheduler noop registered

[ 0.471876] io scheduler anticipatory registered

[ 0.471879] io scheduler deadline registered

[ 0.471924] io scheduler cfq registered (default)

[ 0.472176] isapnp: Scanning for PnP cards...

[ 0.825896] isapnp: No Plug & Play device found

[ 0.827826] Linux agpgart interface v0.103

[ 0.827985] agpgart: Detected VIA KT400/KT400A/KT600 chipset

[ 0.832224] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000

[ 0.832259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.832379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.832511] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 0.832862] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.833007] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 0.833196] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[ 0.833200] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[ 0.833395] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.833525] mice: PS/2 mouse device common for all mice

[ 0.833590] rtc_cmos 00:04: RTC can wake from S4

[ 0.833646] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

[ 0.833696] rtc0: alarms up to one year, y3k, 242 bytes nvram

[ 0.833711] cpuidle: using governor ladder

[ 0.833715] cpuidle: using governor menu

[ 0.833721] No iBFT detected.

[ 0.834287] TCP cubic registered

[ 0.834491] NET: Registered protocol family 10

[ 0.835688] Mobile IPv6

[ 0.835693] NET: Registered protocol family 17

[ 0.835716] Using IPI No-Shortcut mode

[ 0.835820] PM: Resume from disk failed.

[ 0.835836] registered taskstats version 1

[ 0.836195] rtc_cmos 00:04: setting system clock to 2012-01-07 05:49:05 UTC (1325915345)

[ 0.836252] Initalizing network drop monitor service

[ 0.836293] Freeing unused kernel memory: 380k freed

[ 0.836925] Write protecting the kernel text: 2508k

[ 0.836951] Write protecting the kernel read-only data: 920k

[ 0.861615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 0.869650] udev[46]: starting version 164

[ 1.129558] usbcore: registered new interface driver usbfs

[ 1.129773] usbcore: registered new interface driver hub

[ 1.154260] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker

[ 1.154270] via-rhine: Broken BIOS detected, avoid_D3 enabled.

[ 1.154698] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23

[ 1.154702] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23

[ 1.154717] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23

[ 1.158723] usbcore: registered new device driver usb

[ 1.160409] eth0: VIA Rhine II at 0x1c000, 00:50:8d:46:65:d5, IRQ 23.

[ 1.161123] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.

[ 1.167624] SCSI subsystem initialized

[ 1.171090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.171500] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21

[ 1.171504] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21

[ 1.171519] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[ 1.171553] ehci_hcd 0000:00:10.3: EHCI Host Controller

[ 1.171601] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1

[ 1.171697] ehci_hcd 0000:00:10.3: irq 21, io mem 0xe4301000

[ 1.180572] Floppy drive(s): fd0 is 1.44M

[ 1.181467] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00

[ 1.181520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 1.181524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.181528] usb usb1: Product: EHCI Host Controller

[ 1.181531] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd

[ 1.181534] usb usb1: SerialNumber: 0000:00:10.3

[ 1.181755] usb usb1: configuration #1 chosen from 1 choice

[ 1.181859] hub 1-0:1.0: USB hub found

[ 1.181879] hub 1-0:1.0: 6 ports detected

[ 1.213058] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI

[ 1.213063] e100: Copyright(c) 1999-2006 Intel Corporation

[ 1.213131] e100 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 1.298793] e100 0000:00:0a.0: PME# disabled

[ 1.300447] FDC 0 is a post-1991 82077

[ 1.317231] uhci_hcd: USB Universal Host Controller Interface driver

[ 1.319786] thermal LNXTHERM:01: registered as thermal_zone0

[ 1.319800] ACPI: Thermal Zone [THRM] (32 C)

[ 1.321189] libata version 3.00 loaded.

[ 1.330710] fan PNP0C0B:00: registered as cooling_device0

[ 1.330720] ACPI: Fan [FAN] (on)

[ 1.332431] e100: eth1: e100_probe: addr 0xe4300000, irq 17, MAC addr 00:d0:b7:2e:42:47

[ 1.332494] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[ 1.332508] uhci_hcd 0000:00:10.0: UHCI Host Controller

[ 1.332532] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2

[ 1.332562] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00

[ 1.332635] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 1.332640] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.332644] usb usb2: Product: UHCI Host Controller

[ 1.332647] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd

[ 1.332650] usb usb2: SerialNumber: 0000:00:10.0

[ 1.332794] usb usb2: configuration #1 chosen from 1 choice

[ 1.332840] hub 2-0:1.0: USB hub found

[ 1.332855] hub 2-0:1.0: 2 ports detected

[ 1.333105] pata_via 0000:00:11.1: version 0.3.4

[ 1.333484] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20

[ 1.333488] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20

[ 1.333502] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20

[ 1.336816] scsi0 : pata_via

[ 1.338189] scsi1 : pata_via

[ 1.341218] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14

[ 1.341223] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15

[ 1.341326] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[ 1.341342] uhci_hcd 0000:00:10.1: UHCI Host Controller

[ 1.341378] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3

[ 1.341413] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000

[ 1.341485] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[ 1.341489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.341493] usb usb3: Product: UHCI Host Controller

[ 1.341496] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd

[ 1.341499] usb usb3: SerialNumber: 0000:00:10.1

[ 1.341655] usb usb3: configuration #1 chosen from 1 choice

[ 1.341708] hub 3-0:1.0: USB hub found

[ 1.341723] hub 3-0:1.0: 2 ports detected

[ 1.341795] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21

[ 1.341804] uhci_hcd 0000:00:10.2: UHCI Host Controller

[ 1.341815] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4

[ 1.341838] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400

[ 1.341892] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[ 1.341896] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.341899] usb usb4: Product: UHCI Host Controller

[ 1.341902] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd

[ 1.341905] usb usb4: SerialNumber: 0000:00:10.2

[ 1.341991] usb usb4: configuration #1 chosen from 1 choice

[ 1.342029] hub 4-0:1.0: USB hub found

[ 1.342041] hub 4-0:1.0: 2 ports detected

[ 1.504545] ata1.00: ATA-5: ST380021A, 3.75, max UDMA/100

[ 1.504551] ata1.00: 156301488 sectors, multi 16: LBA

[ 1.512418] ata1.00: configured for UDMA/100

[ 1.512586] scsi 0:0:0:0: Direct-Access ATA ST380021A 3.75 PQ: 0 ANSI: 5

[ 1.644015] usb 2-1: new low speed USB device using uhci_hcd and address 2

[ 1.676381] ata2.00: ATAPI: JLMS DVD-ROM LTD163, GH5R, max UDMA/33

[ 1.684257] ata2.00: configured for UDMA/33

[ 1.684775] scsi 1:0:0:0: CD-ROM JLMS DVD-ROM LTD163 GH5R PQ: 0 ANSI: 5

[ 1.715161] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)

[ 1.715243] sd 0:0:0:0: [sda] Write Protect is off

[ 1.715248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.715282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.715483] sda:sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray

[ 1.717920] Uniform CD-ROM driver Revision: 3.20

[ 1.718473] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 1.725769] sda1 sda2 < sda5 >

[ 1.751640] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.776633] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 1.777692] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 1.824029] usb 2-1: New USB device found, idVendor=046d, idProduct=c058

[ 1.824035] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 1.824039] usb 2-1: Product: USB Optical Mouse

[ 1.824042] usb 2-1: Manufacturer: Logitech

[ 1.824202] usb 2-1: configuration #1 chosen from 1 choice

[ 1.845718] usbcore: registered new interface driver hiddev

[ 1.861721] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1

[ 1.861957] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1/input0

[ 1.862003] usbcore: registered new interface driver usbhid

[ 1.862284] usbhid: v2.6:USB HID core driver

[ 2.127959] PM: Starting manual resume from disk

[ 2.127967] PM: Resume from partition 8:5

[ 2.127969] PM: Checking hibernation image.

[ 2.150835] PM: Error -22 checking image file

[ 2.150838] PM: Resume from disk failed.

[ 2.216980] kjournald starting. Commit interval 5 seconds

[ 2.216998] EXT3-fs: mounted filesystem with ordered data mode.

[ 3.714878] udev[299]: starting version 164

[ 4.184434] udev[314]: renamed network interface eth0 to eth0-eth1

[ 4.194624] udev[312]: renamed network interface eth1 to eth0

[ 4.235609] udev[314]: renamed network interface eth0-eth1 to eth1

[ 4.253514] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2

[ 4.253529] ACPI: Power Button [PWRB]

[ 4.253771] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3

[ 4.253782] ACPI: Sleep Button [SLPB]

[ 4.253959] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[ 4.253965] ACPI: Power Button [PWRF]

[ 4.273004] Marking TSC unstable due to TSC halts in idle

[ 4.274339] processor LNXCPU:00: registered as cooling_device1

[ 4.279033] Switching to clocksource acpi_pm

[ 4.328342] NET: Registered protocol family 23

[ 4.516760] input: PC Speaker as /devices/platform/pcspkr/input/input5

[ 4.518114] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 4.915588] parport_pc 00:0a: reported by Plug and Play ACPI

[ 4.915716] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]

[ 4.951094] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 5.053278] gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xa800, speed 1169kHz

[ 5.505637] [drm] Initialized drm 1.1.0 20060810

[ 5.630153] Error: Driver 'pcspkr' is already registered, aborting...

[ 5.817544] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22

[ 5.817551] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22

[ 5.817565] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22

[ 5.817936] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64

[ 5.930045] [drm] radeon defaulting to userspace modesetting.

[ 5.930122] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 5.930476] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on minor 0

[ 6.336366] EMU10K1_Audigy 0000:00:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 6.850038] Adding 2000888k swap on /dev/sda5. Priority:-1 extents:1 across:2000888k

[ 7.125916] EXT3 FS on sda1, internal journal

[ 7.284832] loop: module loaded

[ 8.204044] e100 0000:00:0a.0: firmware: requesting e100/d101m_ucode.bin

[ 8.272719] e100: eth0: e100_request_firmware: Failed to load firmware "e100/d101m_ucode.bin": -2

[ 8.289684] e100 0000:00:0a.0: firmware: requesting e100/d101m_ucode.bin

[ 8.298402] e100: eth0: e100_request_firmware: Failed to load firmware "e100/d101m_ucode.bin": -2

root@debianhome/murmur#

/etc/network/interfaces

Citation :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

o'gure

Modérateur
Multi grognon de B_L

en fait ta debian a créé 3 interfaces :
eth0 eth1 eth2
l'une des 3 est celle qui est connectée mais il n'a configuré que eth0...

La solution simple est de copier la config de eth0 pour eth1 et eth2 puis de redémarrer le service réseau ou redémarrer.

La solution plus compliquée est de comprendre pourquoi il y a 3 interfaces, de supprimer celle qui n'ont pas raison d'exister.

Message cité 1 fois

le rageux

o'gure a écrit :

D'accord, donc en fait quelle commande dois-je taper ou quel fichier dois-je modifier? Qu'est-ce je remplace exactement ?

Publicité

o'gure

Modérateur
Multi grognon de B_L

le rageux a écrit :

D'accord, donc en fait quelle commande dois-je taper ou quel fichier dois-je modifier? Qu'est-ce je remplace exactement ?

Ben le fichier /etc/network/interfaces...

o'gure a écrit :

La solution simple est de copier la config de eth0 pour eth1 et eth2 puis de redémarrer le service réseau ou redémarrer.

Et tu copies la config de eth0 pour eth1 et eth2 (ie tu copies les lignes concernant eth0 et tu remplaces par eth1 puis encore par eth2)

Message édité par o'gure le 07-01-2012 à 19:54:26

le rageux

Roooooh!!!!! ça marche!! J'ai remplacé eth0 par eth1 et ça download enfin. Merci

agentsteel

en plus il te manque 1 firmware pour eth0

[ 8.204044] e100 0000:00:0a.0: firmware: requesting e100/d101m_ucode.bin

[ 8.272719] e100: eth0: e100_request_firmware: Failed to load firmware "e100/d101m_ucode.bin": -2

[ 8.289684] e100 0000:00:0a.0: firmware: requesting e100/d101m_ucode.bin

[ 8.298402] e100: eth0: e100_request_firmware: Failed to load firmware "e100/d101m_ucode.bin": -2

donc il te faut :

- ajouter les dépots non-free dans ton /etc/apt/sources.list
- installer le paquet firmware-nonfree

http://packages.debian.org/squeeze [...] ux-nonfree

toujours regarder son dmesg en premier!

---------------
http://agentoss.wordpress.com/

FORUM HardWare.fr

Linux et OS Alternatifs

réseaux et sécurité

Debian, reconfigurer accès au réseau, problème help!

Sujets relatifs
Boot kern 2.6.36 debian 5 hyper-v	Problème écriture sous freenas
Comment accéder à un partage Debian sur Windows	samba ss debian accesible par xp mais par 7? du jour au lendemain!
Données perso : accès multi OS. Vos solutions merci	Acces données de l'hote via linux sous HyperV
Problème de démarrage sous Kubuntu ! =/	[Debian]Mise à jour vers Squeeze qui se passe mal
[Debian] Installation Squeeze - Raid logiciel - erreur grub2	Samba : Accès guest + accès lecture/écriture pour users
Plus de sujets relatifs à : Debian, reconfigurer accès au réseau, problème help!

Page générée en 0.081 secondes