Bonjour,
quand je veux faire un lilo -vn, j'ai un message d'erreur:
 
thierryhome/thierry# lilo -v
LILO version 22.5.9, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2004 John Coffman
Released 08-Apr-2004, and compiled at 15:30:00 on Aug 15 2004
Debian GNU/Linux
 
Reading boot sector from /dev/hda
part_nowrite check:: No such device or address
thierryhome/thierry#
 
Je vous copie colle le contenu de lilo.conf.
Merci
A+
 
PS: je suis pas sure qu'il y ait un rapport mais je suis passé au noyau 2.6.8 aujourd'hui.
 
----------------------------------------------------------------------------------
# /etc/lilo.conf - See: `lilo(Cool' and `lilo.conf(5)',
# --------------- `install-mbr(Cool', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.
 
# +---------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt', or install a new kernel. The |
# | computer will most likely fail to boot if a kernel-image |
# | post-install script or you don't remember to run `lilo'. |
# | |
# +---------------------------------------------------------------+
 
# Support LBA for large hard disks.
#
lba32
 
# Overrides the default mapping between harddisk names and the BIOS'
# harddisk order. Use with caution.
#disk=/dev/hde
# bios=0x81
 
#disk=/dev/sda
# bios=0x80
 
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/hda
 
# Specifies the device that should be mounted as root. (`/')
#
root=/dev/hda11
 
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller. Using `compact' is especially recommended when
# booting from a floppy disk. It is disabled here by default
# because it doesn't always work.
#
# compact
 
# Installs the specified file as the new boot sector
# You have the choice between: bmp, compat, menu and text
# Look in /boot/ and in lilo.conf(5) manpage for details
#
#install=/boot/boot-menu.b
install=/boot/boot-bmp.b
bitmap=/usr/share/debian-bootscreen/debian-bootscreen-sid.rle.bmp
bmp-colors=1,,0,2,,0
bmp-table=120p,173p,1,15,17
bmp-timer=254p,432p,1,0,0
 
# Specifies the location of the map file
#
map=/boot/map
 
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration. If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well. Please RTFM `install-mbr(Cool'.
#
# password=tatercounter2000
 
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20
 
# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
prompt
timeout=150
# prompt
# single-key
# delay=100
# timeout=100
 
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode> )
#
# vga=ask
# vga=9
#
vga=normal
 
# Kernel command line options that apply to all installed images go
# here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
 
append="hdc=ide-scsi hdd=ide-scsi max_scsi_luns=1 apm=power-off"
 
# Boot up Linux by default.
#
default=Linux
 
image=/boot/vmlinuz
label=Linux
read-only
# restricted
# alias=1
 
 
#image=/boot/vmlinuz.old
# label=LinuxOLD
# read-only
# restricted
# alias=1
 
# If you have another OS on this machine to boot, you can uncomment the
# following lines, changing the device name on the `other' line to
# where your other OS' partition is.
#
 
other=/dev/hda1
label="Windows"
------------------------------------------------------------------------------