quelqu'un utilise t'il une geforce 4 sous debian ?
 
 
car les driver nv par default n'on pas l'air de fonctionner.

faut virer le framebuffer
il doit etre en dessous de "nv" dans le XF86config-4

non mais si je met useFB machin la en commentaire et que je met les driver de base nv, il me met Device not detected
donc bon je vois pas trop comment tu fais =)
 
et a l'installation des driver nvidia pour le kernel il me fait une erreur donc c'est sympa

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
 
Section "Files"
 FontPath "unix/:7100"   # local font server
 # if the local font server has problems, we can fall back on these
 FontPath "/usr/lib/X11/fonts/misc"
 FontPath "/usr/lib/X11/fonts/cyrillic"
 FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/lib/X11/fonts/Type1"
 FontPath "/usr/lib/X11/fonts/Speedo"
 FontPath "/usr/lib/X11/fonts/100dpi"
 FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
 
Section "Module"
# Load "GLcore"
 Load "bitmap"
 Load "dbe"
 Load "ddc"
# Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "record"
 Load "speedo"
 Load "type1"
 Load "vbe"
EndSection
 
Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver  "keyboard"
 Option  "CoreKeyboard"
 Option  "XkbRules" "xfree86"
 Option  "XkbModel" "pc105"
 Option  "XkbLayout" "fr"
EndSection
 
Section "InputDevice"
 Identifier "Configured Mouse"
 Driver  "mouse"
 Option  "CorePointer"
 Option  "Device"  "/dev/psaux"
 Option  "Protocol"  "ImPS/2"
 Option  "ZAxisMapping"  "4 5"
EndSection
 
#Section "InputDevice"
# Identifier "Generic Mouse"
# Driver  "mouse"
# Option  "SendCoreEvents" "true"
# Option  "Device"  "/dev/input/mice"
# Option  "Protocol"  "ImPS/2"
# Option  "ZAxisMapping"  "4 5"
#EndSection
 
Section "Device"
 Identifier "Geforce4 Ti4200"
 Driver  "nv"
EndSection
 
Section "Monitor"
 Identifier "sony E200E"
 HorizSync 30-85
 VertRefresh 48-120
 Option  "DPMS"
 
#modelines...
ModeLine "1152x864" 130.52 1152 1200 1440 1536 864 866 878 904 #94Hz
ModeLine "1024x768" 119.45 1024 1072 1312 1408 768 770 782 808 #105Hz
ModeLine "800x600" 86.01 800 840 1040 1120 600 602 614 640 #120Hz
 
EndSection
 
Section "Screen"
 Identifier "Default Screen"
 Device  "Geforce4 Ti4200"
 Monitor  "sony E200E"
 DefaultDepth 24
 SubSection "Display"
  Depth  1
  Modes  "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  4
  Modes  "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  8
  Modes  "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  15
  Modes  "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  16
  Modes  "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth  24
  Modes  "1152x864" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection
 
Section "ServerLayout"
 Identifier "Default Layout"
 Screen  "Default Screen"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
# InputDevice "Generic Mouse"
EndSection
 
Section "DRI"
 Mode 0666
EndSection
 
### END DEBCONF SECTION

 
 
Oui. Avec le driver Nvidia. Pas de pb.

j'y pense.. ton xfree est a jour.. car la version de base de la woody gere jusqu'a gf3 je crois

ouais voila j'ai installé les driver nvidia, ca marche nickel, merci