bonsoir à tous,
voila j'ai un pote qui est chez moi et qui est venu avec son Creative muvo N200 , et j'aimerai savoir comment communiquer avec cet appareil via Linux Mandrake en USB afin de transferer des mp3 dessus
 
voili voilou, si vous savez comment s'y prendre je suis preneur
 
j'ai trouvé cette page http://linux.highsphere.net/howtos/muvo.php(...)
 
le probleme c'est qu'ils disent qu'il faut taper cat /proc/scsi/scsi pour voir si le creative muvo n200 est bien repéré, mais moi ds mon repertoire proc, je n'ai pas de repertoire scsi
 

peux tu taper dmesg dans un shell et faire un copier coller de ce que tu as ici .

Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2518.0774 MHz.
..... host bus clock speed is 132.0566 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 171k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbeae, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P2) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I7,P0) -> 16
PCI->APIC IRQ transform: (B2,I8,P0) -> 17
vesafb: framebuffer at 0xf0000000, mapped to 0xe0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:e350
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x7a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1110065064.4294965616:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD1200JB-75CRA0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG DVD-ROM SD-616, ATAPI CD/DVD-ROM drive
hdd: _NEC CD-RW NR-9100A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
        current capacity is 234375000 sectors (120000 MB)
        native  capacity is 234375120 sectors (120000 MB)
hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Logitech Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda5: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 377431
ext3_orphan_cleanup: deleting unreferenced inode 377430
ext3_orphan_cleanup: deleting unreferenced inode 376102
EXT3-fs: hda5: 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 19, io base 0000ff80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 18, io base 0000ff60
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
usb 1-1: control timeout on ep0out
uhci_hcd 0000:00:1f.2: Unlink after no-IRQ?  Different ACPI or APIC settings may help.
usb 1-1: device not accepting address 2, error -71
usb 1-1: new full speed USB device using address 3
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 3, error -71
EXT3 FS on hda5, internal journal
Adding 1124508k swap on /dev/hda6.  Priority:-1 extents:1
nvidia: module license 'NVIDIA' taints kernel.
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6629  Wed Nov  3 13:12:51 PST 2004
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.15 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
loop: loaded (max 8 devices)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
natsemi eth0: NatSemi DP8381[56] at 0xe0a32000 (0000:02:08.0), 00:0f:b5:44:1f:18, IRQ 17, port TP.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 328 bytes per conntrack
inserting floppy driver for 2.6.8.1-12mdk
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4091 buckets, 32728 max) - 328 bytes per conntrack
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0322b60(lo)
IPv6 over IPv4 tunneling driver
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 5 changed to on
eth0: no IPv6 routers present
cdrom: hdc: mmc-3 profile capable, current profile: 8h
cdrom: hdc: mmc-3 profile capable, current profile: 8h
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cdrom: This disc doesn't have any tracks I recognize!
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0f:b5:44:1f:18:00:07:cb:13:a6:de:08:00 SRC=218.190.128.68 DST=81.57.50.174 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=46099 DF PROTO=TCP SPT=2103 DPT=5554 WINDOW=16384 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0f:b5:44:1f:18:00:07:cb:13:a6:de:08:00 SRC=218.190.128.68 DST=81.57.50.174 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=46353 DF PROTO=TCP SPT=2357 DPT=9898 WINDOW=16384 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0f:b5:44:1f:18:00:07:cb:13:a6:de:08:00 SRC=222.233.52.32 DST=81.57.50.174 LEN=451 TOS=0x00 PREC=0x00 TTL=45 ID=0 DF PROTO=UDP SPT=40671 DPT=1026 LEN=431
Shorewall:net2all:DROP:IN=eth0 OUT= MAC=00:0f:b5:44:1f:18:00:07:cb:13:a6:de:08:00 SRC=222.233.52.32 DST=81.57.50.174 LEN=451 TOS=0x00 PREC=0x00 TTL=45 ID=0 DF PROTO=UDP SPT=40671 DPT=1027 LEN=431

fais un lsmod et regarde si le module usb-storage est chargé.
sinon sous windows est ce que ton appareil est reconnu comme un disque dur externe ?

lorsque je tape lsmod y a pas de usb-storage  
sur Windows XP il est reconnu comme disque amovible

uhci-hcd               28752  0
usbcore               103172  3 uhci-hcd
 
voila ce que j'ai pour l'usb quand je tape lsmod

bah il te faut faire un  
modprobe usb-storage
mkdir /mnt/muvo
mount -t vfat /dev/sda1 /mnt/muvo  
 
apres tu devrais avoir tes mp3 dasn /mnt/muvo
qqes fois il faut remplacer sda1 par sda tt court

heu j'ai pas de répertoire sda1 ni de sda

rajoutes un modprobe sg

ca change rien

mount -t vfat /dev/sda1 /mnt/muvo
mount: périphérique spécial /dev/sda1 n'existe pas
[root@palaisrose-1-81-5X-5X-XXX muvo]# mount -t vfat /dev/sda /mnt/muvo
mount: périphérique spécial /dev/sda n'existe pas
[root@palaisrose-1-81-5X-5X-XXX muvo]#

dans ton lsmod as tu :
sd_mod  
sg
scsi_mod
usb-storage

oui

tres bizarre... ca devrait fonctionner
donne un dmesg |tail

bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 5 changed to on
eth0: no IPv6 routers present
cdrom: This disc doesn't have any tracks I recognize!
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.

juste une question à la con :
ton appareil est bien branché ? il ne s'est pas mis en veille depuis le temps que tu fais tes tests ? il n'y a pas de mode special pour activer le transfert ?
sinon essaie de changer de port usb...
donne le resultat de cat /proc/bus/usb/devices

oui l'appareil est bien branché, et y a pas de mode special pour activer le transfert  
 
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.8.1-12mdk uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1f.4
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
 
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.8.1-12mdk uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

le système considère qu'il n'y a rien sur tes ports usb... je ne vois pas du tout d'où cela peut venir... normalement qd tu branches un usb il devrait apparaitre dans ce fichier. as tu essayé un autre port usb ?

j'ai changé de port pour voir et voila ce que j'obtiens T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.8.1-12mdk uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1f.4
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
 
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.8.1-12mdk uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms