M300A | Bon en 2.6.29 ça donne
Code :
- gandalf@stormrage:~$ dmesg | grep -i acpi
- [ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fffffc0 (ACPI data)
- [ 0.000000] BIOS-e820: 000000002fffffc0 - 0000000030000000 (ACPI NVS)
- [ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
- [ 0.000000] ACPI: RSDT 2FFFA7F0, 0034 (r1 INSYDE RSDT_000 1 _CSI 10101)
- [ 0.000000] ACPI: FACP 2FFFFB00, 0074 (r1 COMPAL DCL56 200 _CSI 10101)
- [ 0.000000] ACPI: DSDT 2FFFAC70, 4E8A (r1 COMPAL DCL561 6 MSFT 100000E)
- [ 0.000000] ACPI: FACS 2FFFFFC0, 0040
- [ 0.000000] ACPI: BOOT 2FFFFB90, 0028 (r1 INSYDE SYS_BOOT 100 _CSI 10101)
- [ 0.000000] ACPI: DBGP 2FFFFBC0, 0034 (r1 INSYDE DBGP_000 100 _CSI 10101)
- [ 0.000000] ACPI: SSDT 2FFFA830, 029A (r1 INSYDE GV3Ref 2000 INTL 20021002)
- [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
- [ 0.112816] ACPI: Core revision 20081204
- [ 0.120819] ACPI: setting ELCR to 0200 (from 0c80)
- [ 0.128989] ACPI: bus type pci registered
- [ 0.131128] ACPI: EC: Look up EC in DSDT
- [ 0.135318] ACPI: Interpreter enabled
- [ 0.135365] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.135585] ACPI: Using PIC for interrupt routing
- [ 0.181606] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
- [ 0.181654] ACPI: EC: driver started in poll mode
- [ 0.182089] ACPI: ACPI Dock Station Driver: 1 docks/bays found
- [ 0.182146] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.182804] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
- [ 0.184263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.184402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
- [ 0.184453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
- [ 0.191541] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10)
- [ 0.191821] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10) *11
- [ 0.192119] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10) *11
- [ 0.192427] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10) *11
- [ 0.192742] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.193322] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.193900] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.194478] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *7
- [ 0.195065] PCI: Using ACPI for IRQ routing
- [ 0.195390] pnp: PnP ACPI init
- [ 0.195440] ACPI: bus type pnp registered
- [ 0.216351] pnp: PnP ACPI: found 9 devices
- [ 0.216396] ACPI: ACPI bus type pnp unregistered
- [ 0.216442] PnPBIOS: Disabled by ACPI PNP
- [ 0.253305] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
- [ 1.264457] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
- [ 1.381753] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
- [ 1.382024] processor ACPI_CPU:00: registered as cooling_device0
- [ 1.382073] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 1.505251] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
- [ 1.522887] firewire_ohci 0000:02:00.0: power state changed by ACPI to D0
- [ 1.535159] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
- [ 1.536273] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
- [ 6.809416] ACPI: Power Button (FF) [PWRF]
- [ 6.809476] ACPI Error (evxfevnt-0193): Could not enable SleepButton event [20081204]
- [ 6.809597] ACPI Warning (evxface-0146): Could not enable fixed event 3 [20081204]
- [ 6.809921] ACPI: Lid Switch [LID]
- [ 6.810078] ACPI: Power Button (CM) [PWRB]
- [ 6.872930] ACPI: AC Adapter [ACAD] (off-line)
- [ 7.012431] ACPI: Battery Slot [BAT1] (battery present)
- [ 7.946717] ipw2200 0000:02:02.0: power state changed by ACPI to D0
- [ 18.017075] ACPI: EC: non-query interrupt received, switching to interrupt mode
- [ 18.020944] ACPI: EC: GPE storm detected, transactions will use polling mode
|
En 2.6.18:
Code :
- gandalf@stormrage:~$ dmesg | grep -i acpi
- BIOS-e820: 000000002fff0000 - 000000002fffffc0 (ACPI data)
- BIOS-e820: 000000002fffffc0 - 0000000030000000 (ACPI NVS)
- ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
- ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x2fffa7f0
- ACPI: FADT (v001 COMPAL DCL56 0x00000200 _CSI 0x00010101) @ 0x2ffffb00
- ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x2ffffb90
- ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x2ffffbc0
- ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x2fffa830
- ACPI: DSDT (v001 COMPAL DCL561 0x00000006 MSFT 0x0100000e) @ 0x00000000
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Core revision 20060707
- ACPI: setting ELCR to 0200 (from 0c80)
- ACPI: bus type pci registered
- ACPI: Interpreter enabled
- ACPI: Using PIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10) *11
- ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10) *11
- ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10) *11
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *7
- ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 9 devices
- PnPBIOS: Disabled by ACPI PNP
- PCI: Using ACPI for IRQ routing
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI interrupt for device 0000:00:1f.6 disabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
- ACPI: Processor [CPU0] (supports 8 throttling states)
- ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
- Time: acpi_pm clocksource has been installed.
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
- ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
|
|