Je débute sous la debian ( woody 30r0 ) et j'ai un problème avec mon écran ...
 
Il n'est pas reconnu au démarage de xfree ...
 
J'ai une geforce 3ti500 et un Liyama vision master pro 410 ...
 
J'ai essayé de changer la config avec xconfig, mais rien à faire ...
 
J'ai essayé de chercher des pilotes pour la debian, mais je n'ai rien trouver sur le site de Nvidia pour la debian ...
 
Merci pour votre aide ...
 

 
Edit :
 
Problème de pilote pour Carte Son SoundBlaster Live 5.1, chez créative, aucun pilote ...
 
Merci encore
 

ya quoi ds xf86config?

 
tu veux savoir quoi si je me rappele de tete sinon fo ke je reboot ...  

je veux un fichier de config complet, je pense pas ke tu t'en rappelle de tete...

ouais envoie le fichier

 
k je reboot

Je suis sous la debian avec ma carte voodoo PCI, je vais chercher le Xfree

# File generated by xf86config.
 
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software" ),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#  
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#  
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#  
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
 
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of  
# this file.
# **********************************************************************
 
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
 
# This loads the DBE extension module.
 
    Load        "dbe"   # Double buffer extension
 
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
 
# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"
 
# This loads the GLX module
#    Load       "glx"
 
EndSection
 
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
 
Section "Files"
 
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db" ).  There is normally
# no need to change the default.
 
    RgbPath "/usr/X11R6/lib/X11/rgb"
 
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#  
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#  
 
#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
 
# The module search path.  The default path is shown here.
 
#    ModulePath "/usr/X11R6/lib/modules"
 
EndSection
 
# **********************************************************************
# Server flags section.
# **********************************************************************
 
Section "ServerFlags"
 
# Uncomment this to cause a core dump at the spot where a signal is  
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
 
#    Option "NoTrapSignals"
 
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
 
#    Option "DontZap"
 
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.
 
#    Option "Dont Zoom"
 
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
 
#    Option "DisableVidModeExtension"
 
# Uncomment this to enable the use of a non-local xvidtune client.  
 
#    Option "AllowNonLocalXvidtune"
 
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.  
 
#    Option "DisableModInDev"
 
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
 
#    Option "AllowNonLocalModInDev"
 
EndSection
 
# **********************************************************************
# Input devices
# **********************************************************************
 
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
    Identifier "Keyboard1"
    Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard" ).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
 
#    Option     "Protocol"      "Xqueue"
 
    Option "AutoRepeat" "500 30"
 
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"
 
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
 
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
 
# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
 
#    Option "XkbDisable"
 
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"
    Option "XkbVariant" "fr"
 
EndSection
 
 
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
 
Section "InputDevice"
 
# Identifier and driver
 
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/mouse"
 
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
 
#    Option "Protocol" "Xqueue"
 
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
 
#    Option "BaudRate" "9600"
#    Option "SampleRate" "150"
 
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
 
    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
 
# ChordMiddle is an option for some 3-button Logitech mice
 
#    Option "ChordMiddle"
 
EndSection
 
 
# **********************************************************************
# Other input device sections  
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"  
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
 
# **********************************************************************
# Monitor section
# **********************************************************************
 
# Any number of monitor sections may be present
 
Section "Monitor"
 
    Identifier  "screen"
 
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
    HorizSync   31.5 - 82.0
 
#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50  # multiple ranges of sync frequencies
 
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 
    VertRefresh 40-150
 
EndSection
 
 
# **********************************************************************
# Graphics device section
# **********************************************************************
 
# Any number of graphics device sections may be present
 
# Standard VGA Device:
 
Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
 
# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
 
#    Chipset "generic"
 
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
 
    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
 
#    BusID      "PCI:0:10:0"
 
#    VideoRam 256
 
#    Clocks 25.2 28.3
 
EndSection
 
# Device configured by xf86config:
 
Section "Device"
    Identifier  "vcard"
    Driver      "vga"
 # unsupported card
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection
 
 
# **********************************************************************
# Screen sections
# **********************************************************************
 
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "vcard"
    Monitor     "screen"
    DefaultDepth 16
 
    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection
 
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
 
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
 
Section "ServerLayout"
 
# The Identifier line must be present
    Identifier  "Simple Layout"
 
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
 
    Screen "Screen 1"
 
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
 
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
 
EndSection
 
 [fixed]
 
Désolé pour la taille

et tu es sur ke toutes les valeurs concernant l'ecran sont bonnes?

by the way: c koi le mess d'erreur deja?

Oui la j'ai booter sur la voodoo PCi et la conf marche bien, donc l'ecran a pas de prob ...
 
Je pense que ca vient de la Geforce nan ?

 
ecran noir moi en CTRL F1 F2 ...

 
tu as fait l'install avec kel carte graphik?

DRIVER a la place de vga tu met nv (=nvidia)  
Driver      "vga"  
devient  
Driver      "nv"
tu sauvegardes et ca va rouler  

QnX a écrit a écrit : DRIVER a la place de vga tu met nv (=nvidia)   Driver      "vga"   devient   Driver      "nv" tu sauvegardes et ca va rouler

 
j'essai

si ca marche tu me dois 50 ? e t un mars

QnX a écrit a écrit : si ca marche tu me dois 50 ? e t un mars

 
100 balles et un mars, ca fait pas plutot 15?24?

j'essai ou pas ?

 
tu devrais avoir deja essayer meme
 
install fait avec kel carte?

  biensur ke tu essai pkoi je t l aurai dit sinon

tu m'étonne que X marche pas, y a rien qui est configuré concernant la carte video  
 
y a pas un équivalent de xf86config comme sur la slack sous deb ?

j avais cette couille avec ma geforce2 pro

et si tu veux pas avoir une résolution de 640*480 avec un écran vituel de 1280*1024 tu ferais bien d'inverser l'ordre de :
 
 

 
 
en :
 
 

change dea le driver pour ke ca se lance

il est long a fair ele test qd meme...

deja fait mais ca change rien    
 
je suis de retour sur la voodoo

essaie avec les drivers nvidia, c'est pas dur à installer

et les tar.gz pour linux y font pas deb?

et ont va jusk'en bas de la page regarder les sources pour le kernel pas precompilées....
 
 [citation]
An RPM file is provided for your convenience. If your distribution does not support RPM's then please use the tar file. Also a source RPM is provided for those interested.  
[/citation]

je connais pas grd chose chose en UNIX et encore moins sous la debian...
 
Deja j'ai pas la souris en mode texte alors pour editer en root c pas simple ( je peux pas me loger en mode graphique ...).
 
merci de votre patience en tout ca

Klaimant a écrit a écrit : je connais pas grd chose chose en UNIX et encore moins sous la debian...   Deja j'ai pas la souris en mode texte alors pour editer en root c pas simple ( je peux pas me loger en mode graphique ...).   merci de votre patience en tout ca

 
utilise vi, la souris ca sert a rien...
pour l'install fo ke tu lise en detail le readme de nvidia

sinon utilise mc pour gérer tes fichier en mode texte et les editer c'est plus intuitif qui vi au début (à condition qu'il soit installé)

OK merci je déco jdois allé bosser un coup ...  
 
J'essai tout ca demain ...
 
Merci pour tout
 

 

 
PS : VI c en dernier secours

vegeta020786 a écrit a écrit :     haha vous etes perdu quand y a pas de .deb   *.tar.gz rulez (d'ailleurs prends le *.tar.gz pour les drv nvidia c'est pour TOUTES les distrib linux)

 
correct

De retour chez moi, j'ai toujours le meme prob, un copain m'a conseillé d'installer une unstable ...
 
Sinon pour les drivers nvidia je suppose qu'il faut recompiler le noyeau ???
 
Et enfin, dans le fichier xf86config, je voudrais que le pc ne prenne pas en compte la carte PCI et boot seulement sur l' AGP ( apres le démarage en fait, car le reste je l'ai changé dans le BIOS ), il faut que je modifie quoi ?
Merci (encore une fois) ...   ...
 
 

Klaimant a écrit a écrit : De retour chez moi, j'ai toujours le meme prob, un copain m'a conseillé d'installer une unstable ...   Sinon pour les drivers nvidia je suppose qu'il faut recompiler le noyeau ???   Et enfin, dans le fichier xf86config, je voudrais que le pc ne prenne pas en compte la carte PCI et boot seulement sur l' AGP ( apres le démarage en fait, car le reste je l'ai changé dans le BIOS ), il faut que je modifie quoi ? Merci (encore une fois) ...   ...

 
pas de recompil du noyau... va sur le site de nvidi c expliker et ca se fait en 15 minutes si tu es lent

 
Merci    
 
j'y retourne
 
et pour mon problème de PCI et AGP ?