Citation :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.8
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 604MB (619168kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.8.2005
Burn DVD Image
01:34:05 #1 Text 0 File Reader.cpp, Line 127
Reader running
01:34:05 #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
01:34:05 #3 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
01:34:05 #4 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1725951 (383:32.51, 3370MB)
01:34:05 #5 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
01:34:05 #6 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+RW
Disc Manufacturer ID: MCC, Media Type ID: A01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
01:34:05 #7 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:34:05 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1725952 (1725952) = #1725952/383:32.52
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1725952 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
01:34:05 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3534749696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1725952 | lead-out | 1 | 0x41 | 0x00
01:34:05 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
01:34:05 #11 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
01:34:05 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
01:34:05 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3 324 KB/s)
01:34:05 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
01:34:05 #15 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: A01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 41 30 31 00 39 ...MCC.....A01.9
23 02 84 78 68 02 1D 02 - 92 78 68 02 1B 02 8A 78 #..xh....xh....x
68 02 1C 22 13 00 E0 10 - 00 00 00 00 00 00 00 00 h.."............
01:34:05 #16 Text 0 File DVDR.cpp, Line 4842
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type
01:34:05 #17 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
01:36:00 #18 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful
01:37:46 #19 Text 0 File DVDPlusRW.cpp, Line 638
Start write address at LBA 0
DVD high compatibility mode: Yes
01:37:52 #20 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03C10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0F 0x30 0x05
01:37:52 #21 CDR -1046 File Writer.cpp, Line 311
Illegal disc
01:37:52 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
01:37:53 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
01:39:33 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3 324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
