Bonjour a tous !
Lorsque que je veux graver sous nero un DVD (version 7), au bout de 30 seconde de gravure, le programme m indique "commande SCSI interrompue". Avant d ecrire ce message sur ce forum, j ai fait divers recherches sur le net, et plusieurs personnes disaient que ce probleme venait surement des pilotes du chipset nforce 2. Le hic, c est que ma carte mere est a base de Jmicron (JMB 36X raid driver), dans ce cas, peut etre que ca vient des pilotes de ma CG (8800 GTS). Du coup, j ai desinstaller la CG et reintalle avec les derniers pilotes telecharges sur le site de nvidia pour XP pro (163.71 forceware winxp 32bit international whql), mais rien a faire le probleme persiste ! Autre solution proposee : Aller dans le gestionnaire de periph, et desinstaller le controleur ATA/ATAPI IDE, mais le soucis est qu il n apparait meme pas dans mon gestionnaire de periph (CM gigabyte P35C-DS3R). Voici le log d une gravure foiree sous nero :
1C80-0000-19E5-MA2X-4002-8239-8827
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <PLEXTOR DVDR PX-800A> Version: 1.00 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PLEXTOR DVD-ROM PX-130A >Version: 1.03 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD740GD-00FLA1 iaStor Port 1 ID 0 DMA: On
DiskPeripheral : Volume0 iaStor Port 1 ID 1 DMA: Off
CdRomPeripheral : PLEXTOR DVD-ROM PX-130A 1.03 JRAID Port 2 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-800A 1.00 JRAID Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVD-ROM PX-130A F: CDRom0
PLEXTOR DVDR PX-800A G: CDRom1
ELBY DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095500kB)
Free physical memory: 1192MB (1220700kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.10.2007
Compilation ISO
13:31:52 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:31:52 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
13:31:52 #3 Text 0 File Reader.cpp, Line 124
Reader running
13:31:52 #4 Text 0 File Writer.cpp, Line 113
Writer G: PLEXTOR DVDR PX-800A running
13:31:52 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
13:31:52 #6 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
13:32:22 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 718367 (159:38.17, 1403MB)
13:32:22 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
13:32:22 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-800A, Media type: DVD+RW
Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
13:32:22 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: inconnu. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD-R DL; DVD+R DL.)
This disc is not empty.
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD-R DL; DVD+R DL.)
Accessing disc...
(Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD-R DL; DVD+R DL.)
13:32:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 718368 (718368) = #718368/159:38.18
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 718368 blocks [G: PLEXTOR DVDR PX-800A]
--------------------------------------------------------------
13:32:22 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: PLEXTOR DVDR PX-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1471217664, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
718368 | lead-out | 1 | 0x41 | 0x00
13:32:22 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
13:32:22 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
13:32:22 #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
13:32:22 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
13:32:22 #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2,4x (3 324 Ko/s)
13:32:22 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:32:22 #19 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MKM.....
Media type ID: A02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #.”yd...œzl...š{
68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h.....à.ð.......
13:32:22 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
13:32:42 #21 SPTI -500 File SCSIPassThrough.cpp, Line 323
G: CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0b650000: Len x10000
0x58 95 75 4A A5 5E A1 6A 1E DE FB C6 D6 9F 57 FC
0x5F D4 CF 5D 73 55 14 9F 51 1C F3 BF 36 D3 CD AD
0xC3 0E 99 D7 47 49 19 39 87 55 6A 93 06 96 5C 02
13:32:42 #22 SPTI -500 File SCSIPassThrough.cpp, Line 323
G: CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x05330400: Len x10000
0x58 95 75 4A A5 5E A1 6A 1E DE FB C6 D6 9F 57 FC
0x5F D4 CF 5D 73 55 14 9F 51 1C F3 BF 36 D3 CD AD
0xC3 0E 99 D7 47 49 19 39 87 55 6A 93 06 96 5C 02
13:32:42 #23 Text 0 File MMC.cpp, Line 19278
Writer-Buffer for G: PLEXTOR DVDR PX-800A reduced to 32768Bytes
13:32:42 #24 SPTI -500 File SCSIPassThrough.cpp, Line 323
G: CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x05330400: Len x8000
0x58 95 75 4A A5 5E A1 6A 1E DE FB C6 D6 9F 57 FC
0x5F D4 CF 5D 73 55 14 9F 51 1C F3 BF 36 D3 CD AD
0xC3 0E 99 D7 47 49 19 39 87 55 6A 93 06 96 5C 02
13:32:42 #25 CDR -500 File Writer.cpp, Line 302
SCSI command aborted
G: PLEXTOR DVDR PX-800A
13:32:42 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:32:42 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
13:32:43 #28 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2,4x (3 324 Ko/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 27/07/2007 01:06:18
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 27/07/2007 01:06:18 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
J ai donc continue mes recherches sur le net, et j ai trouve une reponse sur un autre forum, voici ce qui etait marque :
"bonjour,
Impossible d'effectuer la fonction Disc at once....
essayez ceci:
Pour faire avancer le schimilimilick, voici comment j'ai résolu ce problème :
Sur ma carte mère (ASUS P5B) l'IDE PATA est géré par une puce tierce (non intégrée au chipset INTEL) de marque Jmicron. Comme tout un chacun, j'ai installé tous les pilotes présents sur le CD fourni. Et paf voilà que NERO refuse de graver en disc-at-once et plus précisemment comme signalé plus haut en multi session.
Après moultes essai et autres bidouillage, j'ai viré le pilote propre au controleur Jmicron (Dans le gestionnaire de périphérique il suffit de supprimer le controleur) et j'ai forcé la réinstallation du pilote Microsoft qui s'appelle "Contrôleur IDE standard double canal PCI" et hop, la gravure remarche normalement. "
Par contre, le controleur Jmicron n apparait pas texto dans mon gestionnaire de peripherique, sous quel nom se cache t il ? (ma CM en est pourvue car c est une gigabyte P35C-DS3R). Dans mon gestionnaire de periph au niveau des controleurs, j ai controleur de lecteur de lecteur de disquette, controleur audio video et jeu, controleur de bus USB, et controleur SCSI et raid. Et dans le dernier, il y a comme sous categorie Gigabyte GBB36X Controller, et Intel ICH9R Sata Raid Controller. Lequel choisir ?
Et le pire, c est que le controleur ATA/ATAPI IDE n apparait pas dans mon gestionnaire de peripherique alors que je n ai fait aucunes modifs, je ne comprends plus rien !!!
Si vous avez la soluce a mon probleme, n hesitez pas car la je suis vraiment coince !!!
Merci a tous !!!
