c'est sur le site SUPPLYNET£
Toshiba Pocket PC
e740, e330, e335, e350, e355, e750, e755
USB Driver Setup
You must run these instructions before you configure your other device settings.
1. Toshiba Driver Install:
A) For all e330/e335/e740 users, copy the following driver: Click Here
B) For e750/e755 users running Pocket PC 2002, Click Here
For e750/e755 users running Pocket PC 2003, Click Here
(works with GPS users, not with cell phone users)
C) For e350/e355 users (works with GPS users, not with cell phone users),
For Pocket PC 2002, copy filename: e350-355 for Pocket PC 2002.ZIP Click Here
For Pocket PC 2003, copy filename: e350-355 for Pocket PC 2003.ZIP Click Here
For both devices, you must install: Comno.zip Click Here
2. Now with the Toshiba PDA in it's cradle and connected, go to Microsoft Activesync and tap on Explore and paste the .cab file there.
3. On the PDA, goto Start > Programs > File Explorer and tap on the cab file. It will automatically install.
4. Do a soft reset on your Toshiba PDA by doing the following:
A) Remove the PDA from the cradle.
B) Turn the PDA off.
C) Then using the tip of your stylus pen press the reset button, which is located in a small hole at bottom left of the pocket PC (next to the battery removal switch).
5. On the PDA, goto Start > Settings > System > Remove Programs
You should see a program: Prolific PL-2303 Driver
If you do not see this program, repeat steps 1-4.
6. Congratulations! Now the PDA is ready for you to setup a new connection.
A) e330, e740 = Com Port 1
B) e350, e400, e750 = Com Port 2
C) e800 = Com Port 4
Please turn on the GPS before switching on the PDA !!!