c un driver que donne adaptec pour une carte scsi Eisa
 
BOARD
 ID="ADP7771"
 NAME="Adaptec AHA-2740/2742/2744 SCSI Host Adapter"
 MFR="ADAPTEC, Inc."
 CATEGORY="MSD"
 SLOT=EISA
 LENGTH=330
 AMPERAGE=1000
 SKIRT=NO
 READID=YES
 BUSMASTER=50
 IOCHECK=VALID
 DISABLE=SUPPORTED
 COMMENTS="AHA-2740/2742 Configuration File Ver. 2.12 Release"
 
IOPORT(1)=0zc87h   ;Host configuration definition
 INITVAL = 0000X00X
IOPORT(4)=0zc5ch   ;Interrupt definition
 INITVAL = X000XXXX      
IOPORT(2)=0zc5dh   ;Host configuration definition
 INITVAL = XXXXXX00
IOPORT(3)=0zc5ah   ;SCSI configuration
 SIZE = WORD
 INITVAL = XXXXXXXXXXXXXXXX
IOPORT(5)=0zc5fh   ;Host configuration definition
 INITVAL = 00XXXXXX
 
 
FUNCTION = "AIC-7770 Chip Reset"
 SHOW = NO
  CHOICE = ""
   LINK
   INIT = IOPORT(1) LOC(0) 1B
 
FUNCTION = "Host Adapter Interface Definitions"
 
        TYPE = "AIC7771"
HELP = "These selections specify those configuration
  settings that correspond to EISA host bus interface."
 
 SUBFUNCTION = "Interrupt Level"
 HELP = "Interrupt Level configures the interrupt channel (IRQ) used by the host adapter. Multiple AHA-2740  
  Series host adapters installed in your system can share the same IRQ; however, to increase system  
  performance, you may want to select a different IRQ for each host adapter installed.
  The IRQ cannot be shared with ISA mode SCSI host adapters such as the Adaptec AHA-1540 and AHA-
  1520 Series adapters. If those adapters are installed in your EISA system, they must be assigned unique  
  IRQs."
 
  CHOICE = "IRQ 11 LEVEL"
   LINK
   IRQ = 11
   SHARE = YES
   TRIGGER = LEVEL
   INIT=IOPORT(1) LOC(3 0) 11B
   INIT=IOPORT(4) LOC(7 3 2 1 0) 01011B
 
  CHOICE = "IRQ 11  EDGE"
   LINK
   IRQ = 11
   SHARE = NO
   TRIGGER = EDGE
   INIT=IOPORT(1) LOC(3 0) 11B
   INIT=IOPORT(4) LOC(7 3 2 1 0) 11011B