STATUS:>   Getting listing ""...
STATUS:>   Connecting to FTP server 84.98.***.*:8767 (ip = 84.98.***.*)...
STATUS:>   Socket connected. Waiting for welcome message...
  220 TYPSoft FTP Server 1.11 ready...
STATUS:>   Connected. Authenticating...
COMMAND:> USER user
  331 Password required for user.
COMMAND:> PASS *****
  230 User user logged in.
STATUS:>   Login successful.
COMMAND:> PWD
  257 "/CDocuments and Settings/Administrateur/Mes documents/" is current directory.
STATUS:>   Home directory: /CDocuments and Settings/Administrateur/Mes documents/
COMMAND:> FEAT
  211-Extensions supported:
    SIZE
    MDTM
  211 END
STATUS:>   This site supports features.
STATUS:>   This site supports SIZE.
COMMAND:> REST 100
  350 REST supported. Ready to resume at byte offset 100.
STATUS:>   This site can resume broken downloads.
COMMAND:> REST 0
  350 REST supported. Ready to resume at byte offset 0.
COMMAND:> PASV
  227 Entering Passive Mode (192,168,0,***,7,49).
COMMAND:> LIST
STATUS:>   Connecting FTP data socket 192.168.0.***:1841...
ERROR:>    The connection failed due to an error or timeout.
  1) Verify that the destination IP address is correct.
  2) Increase the connection timeout threshold under Global Settings | Connection.
  3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
  4) Verify that the problem is not local by trying to connect to an alternate server.
  5) If a server name was used, verify it resolves to the correct address.
  6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
  7) Try pinging the address.
  8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
  9) Do a traceroute to the destination to verify all routers along the connection path are operational.
  10) Verify that your subnet mask is setup properly.
  11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
  12) Verify that your anti-virus software is not at fault (try disabling it).
ERROR:>    PASV failed, trying PORT.