Citation :
ServerRoot /etc/httpd/2.0
ServerName localhost
#LockFile /etc/httpd/httpd.lock
PidFile /var/run/httpd.pid
ErrorLog logs/error_log
LogLevel warn
DocumentRoot /var/www/html
### Dynamic Shared Object (DSO) Support
###
### You should always leave those three, as they are needed for
### normal use.
### mod_access (Order, Allow, etc..)
### mod_log_config (Transferlog, etc..)
### mod_mime (AddType, etc...)
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
##LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
##LoadModule charset_lite_module modules/mod_charset_lite.so
##LoadModule case_filter_module modules/mod_case_filter.so
##LoadModule case_filter_in_module modules/mod_case_filter_in.so
##LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
##LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
##LoadModule mime_magic_module modules/mod_mime_magic.so
##LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
##LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
##LoadModule cgid_module modules/mod_cgid.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
##LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule jk2_module modules/mod_jk2.so
###
### Global Configuration
###
# We now support multiple apache configurations on the same server. In
# common.conf, we put all directives that are common to all implementations
# (httpd, httpd-perl, etc.)
# For Apache2 we load all conf files in conf.d
Include /etc/httpd/conf.d/*.conf
Include conf/commonhttpd.conf
###
### IP Address/Port and Proxied configuration section
###
# The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
# are using a proxy or accelerator, like the Apache-SGI or khttpd, so that
# the fast web server serves static content while Apache handles the
# cgi or php files
#BindAddress *
<IfDefine APACHEPROXIED>
Listen 8080
</IfDefine>
<IfDefine !APACHEPROXIED>
Listen 80
</IfDefine>
# Likewise, we can set apache as the server by default and send perl
# requests via ProxyPass to apache-mod_perl. It increases performance
# since the perl interpreter is only used for perl and the standard apache
# does all the html and image files, with a smaller footprint.
#
# If you install apache and apache-mod_perl, this is the default config.
# If you don't want two web servers to use perl, uninstall apache, and
# apache-mod_perl will not be proxied.
#<IfDefine PERLPROXIED>
#<IfModule mod_rewrite.c>
# RewriteEngine on
# RewriteRule ^proxy:.* - [F]
# RewriteRule ^(.*\/perl\/.*)$ http://%{HTTP_HOST}:8200$1 [P]
# RewriteRule ^(.*\/cgi-perl\/.*)$ http://%{HTTP_HOST}:8200$1 [P]
#</IfModule>
#</IfDefine>
###
### Log configuration Section
###
<IfModule mod_log_config.c>
#Single logfile with access, agent and referer information
#This is the default, if vlogs are not defined for the main server
CustomLog logs/access_log combined env=!VLOG
#If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
</IfModule>
###
### Virtual Hosts
###
# We include different templates for Virtual Hosting. Have a look in the
# vhosts directory and modify to suit your needs.
Include conf/vhosts/Vhosts.conf
#Include conf/vhosts/DynamicVhosts.conf
#Include conf/vhosts/VirtualHomePages.conf
###
### Performance settings Section
###
#Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
# prefork MPM [THIS IS THE DEFAULT]
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
### Common server configuration
#
User apache
Group apache
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin root@localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
# DO NOT MODIFY THIS ONE, USE httpd.conf and httpd-perl.conf
#DocumentRoot /var/www/html
#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
# Also, for security, we disable indexes globally
#
#<Directory />
# Options -Indexes FollowSymLinks
# AllowOverride None
#</Directory>
#Restricted set of options
<Directory />
Options -All -Multiviews
AllowOverride None
#<IfModule mod_access.c>
# Order deny,allow
#Deny from all
# </IfModule>
</Directory>
<Directory /var/www/html>
Options -Indexes FollowSymLinks
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
DirectoryIndex index.html index.html.var index.php index.php3 index.shtml index.cgi index.pl index.htm Default.htm default.htm index.xml
</IfModule>
#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<IfModule mod_access.c>
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
</IfModule>
#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
#
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
TypesConfig conf/apache-mime.types
</IfModule>
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/m [...] enablemmap
#
# EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/m [...] lesendfile
#
#EnableSendfile off
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
<IfModule mod_log_config.c>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
<IfModule mod_logio.c>
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
#
# The location and format of the access logfile (Common Logfile Format).
</IfModule>
#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
<IfModule mod_alias.c>
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
#
Alias /icons/ /var/www/icons/
Alias /doc /usr/share/doc
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ /var/www/cgi-bin/
ScriptAlias /protected-cgi-bin/ /var/www/protected-cgi-bin/
<IfModule mod_perl.c>
#Provide two aliases to the same cgi-bin directory,
#to see the effects of the 2 different mod_perl modes
#for Apache::Registry Mode
Alias /perl/ /var/www/perl/
#for Apache::Perlrun Mode
Alias /cgi-perl/ /var/www/perl/
</IfModule>
</IfModule>
# End of aliases.
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
<IfModule mod_autoindex.c>
#
# FancyIndexing is whether you want fancy directory indexing or standard
#
<IfDefine !APACHE2>
IndexOptions FancyIndexing NameWidth=*
</IfDefine>
<IfDefine APACHE2>
IndexOptions FancyIndexing VersionSort NameWidth=*
</IfDefine>
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.png) text/*
AddIconByType (IMG,/icons/image2.png) image/*
AddIconByType (SND,/icons/sound2.png) audio/*
AddIconByType (VID,/icons/movie.png) video/*
AddIcon /icons/binary.png .bin .exe
AddIcon /icons/binhex.png .hqx
AddIcon /icons/tar.png .tar
AddIcon /icons/world2.png .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.png .Z .z .tgz .gz .zip .bz2
AddIcon /icons/a.png .ps .ai .eps
AddIcon /icons/layout.png .html .shtml .htm .pdf
AddIcon /icons/text.png .txt
AddIcon /icons/c.png .c
AddIcon /icons/p.png .pl .py .php .php3
AddIcon /icons/f.png .for
AddIcon /icons/dvi.png .dvi
AddIcon /icons/uuencoded.png .uu
AddIcon /icons/script.png .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.png .tex
AddIcon /icons/bomb.png core
AddIcon /icons/back.png ..
AddIcon /icons/hand.right.png README
AddIcon /icons/folder.png ^^DIRECTORY^^
AddIcon /icons/blank.png ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.png
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
#
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
#
# Document types.
#
<IfModule mod_mime.c>
#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
#
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage he .he
AddLanguage ltz .ltz
AddLanguage ltz .lu
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt-br .pt-br
AddLanguage pt .pt
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-TW .zh-tw
AddLanguage eo .eo
#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
#AddDefaultCharset ISO-8859-1
# JMD 2003/09/15 Change to off, since it overrides the META tags
AddDefaultCharset Off
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
<IfModule mod_negotiation.c>
LanguagePriority en cs de es fr it da nl et el ja kr no pl pt pt-br ru ltz ca sv tw ro
# ForceLanguagePriority Prefer Fallback
</IfModule>
#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
<IfModule mod_negotiation.c>
#FUK ForceLanguagePriority Prefer Fallback
</IfModule>
#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
#
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
#
AddType application/x-tar .tgz
AddType image/x-icon .ico
#
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
<IfDefine APACHE2>
AddOutputFilter INCLUDES .shtml
</IfDefine>
<IfDefine !APACHE2>
AddHandler server-parsed .shtml
</IfDefine>
#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
#
# If you wish to use server-parsed imagemap files, use
#
AddHand</IfModule>
ler imap-file map
<Location /manual>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system. Please install either apache-manual or apache2-manual RPMs.
</Location>
<Location /manual-2.0>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system. Please install the apache2-manual package.
</Location>
<Location /manual-1.3>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system. Please install the apache-manual package.
</Location>
#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>
#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carfully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
</IfModule>
# End of browser customization directives
#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
<IfModule mod_access.c>
Order deny,allow
Deny from all
allow from 127.0.0.1
#Allow from .your_domain.com
</IfModule>
</Location>
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
</IfModule>
<IfModule mod_info.c>
<Location /server-info>
SetHandler server-info
<IfModule mod_access.c>
Order deny,allow
Deny from all
allow from 127.0.0.1
# Allow from .your_domain.com
</IfModule>
</Location>
</IfModule>
<IfModule mod_perl.c>
<Location /perl-status>
SetHandler perl-script
<IfDefine !APACHE2>
PerlHandler Apache::Status
</IfDefine>
<IfDefine APACHE2>
PerlResponseHandler Apache::Status
</IfDefine>
<IfModule mod_access.c>
Order deny,allow
Deny from all
Allow from 127.0.0.1
</IfModule>
</Location>
</IfModule>
#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
<IfModule mod_include.c>
# XBitHack on
</IfModule>
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory /var/www/html>
#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "SymLinksifOwnerMatch", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options -Indexes FollowSymLinks MultiViews
AllowOverride All
#
# Controls who can get stuff from this server.
#
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /var/www/perl>
AllowOverride All
Options -Indexes FollowSymLinks MultiViews ExecCGI
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
#Scriptsock /cgisock
</IfModule>
<Directory /var/www/cgi-bin>
AllowOverride All
Options ExecCGI
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /var/www/protected-cgi-bin>
AllowOverride All
Options ExecCGI
<IfModule mod_access.c>
Order deny,allow
Deny from all
Allow from 127.0.0.1
#allow from .your_domain.com
</IfModule>
</Directory>
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
<Directory /home/*/public_html>
AllowOverride All
Options MultiViews -Indexes Includes FollowSymLinks
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /home/*/public_html/cgi-bin>
Options +ExecCGI -Includes -Indexes
SetHandler cgi-script
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<IfModule mod_perl.c>
<Directory /home/*/public_html/perl>
SetHandler perl-script
<IfDefine !APACHE2>
PerlHandler Apache::PerlRun
</IfDefine>
<IfDefine APACHE2>
PerlResponseHandler ModPerl::PerlRun
</IfDefine>
Options -Indexes ExecCGI
PerlSendHeader On
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
</IfModule>
<Directory /var/www/icons>
Options -Indexes MultiViews
AllowOverride None
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /usr/share/doc>
Options Indexes FollowSymLinks
<IfModule mod_access.c>
Order deny,allow
Deny from all
Allow from 127.0.0.1
#allow from .your_domain.com
</IfModule>
</Directory>
<Directory /var/www/html/addon-modules>
Options Indexes FollowSymLinks
</Directory>
<Location /index.shtml>
Options +Includes
</Location>
<IfModule mod_perl.c>
<IfDefine !APACHE2>
PerlModule Apache::Registry
</IfDefine>
#set Apache::Registry Mode for /perl Alias
<Location /perl/*.pl>
SetHandler perl-script
<IfDefine !APACHE2>
PerlHandler Apache::Registry
</IfDefine>
<IfDefine APACHE2>
PerlResponseHandler ModPerl::Registry
</IfDefine>
Options -Indexes ExecCGI
PerlSendHeader On
</Location>
#set Apache::PerlRun Mode for /cgi-perl Alias
<Location /cgi-perl/*.pl>
SetHandler perl-script
<IfDefine !APACHE2>
PerlHandler Apache::PerlRun
</IfDefine>
<IfDefine APACHE2>
PerlResponseHandler ModPerl::PerlRun
</IfDefine>
Options -Indexes ExecCGI
PerlSendHeader On
</Location>
</IfModule>
|
![[:spamafote]](https://forum-images.hardware.fr/images/perso/spamafote.gif "[:spamafote]")