Bonsoir,
Donc voila comme le titre l'indique je rencontre le fameux probleme de l'écran de la mort 
Ma config:
Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
Hardware: ASRock, Z97X Killer
CPU: i7-4790K CPU @ 4.00GHz
RAM: 8 gb 1600mhz Ddr3
J'ai télécharger Whocrashed pour comprendre un peu la source du probleme Voila le raport:
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Fri 12/02/2016 14:06:42 GMT your computer crashed
crash dump file: C:\Windows\Minidump\021216-47252-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12A3B)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8009FA0028, 0xBA000000, 0x58000402)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
J'ai ensuite:
Télécharger les mise a jours windows.
Mis a jours de tt les drivers.
Testé la ram et le disque dur.
J'ai vérifier que mon cpu n'était pas oc la ram aussi, puis j'ai fais un stress cpu avec CPU_Z Bim ecran bleu au bout de 5 seconde j'ai refais une autre fois le stress au bout de 5 minute ecran bleu .
Merci a Vous.
