royalc | Salut à tous , alors voila mon ancien portable ayant rendu l’âme (un acer 7720Z) on m'a donné un Lenovo Y710 avec les caractéristiques suivantes:
Citation :
[General Information]
Processor Name: Intel Core 2 Duo T5550
Original Processor Frequency: 1833.3 MHz
Original Processor Frequency [MHz]: 1833
CPU ID: 000006FD
CPU Brand Name: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz
CPU Vendor: GenuineIntel
CPU Stepping: M0
CPU Code Name: Merom+ 2M
CPU S-Spec: SLA4E
CPU Thermal Design Power (TDP): 35 W
CPU Type: Production Unit
CPU Platform: Socket P (mPGA478/mBGA479)
Microcode Update Revision: A3
Number of CPU Cores: 2
Number of Logical CPUs: 2
[Operating Points]
CPU LFM (Minimum): 1000.0 MHz = 6.00 x 166.7 MHz @ 0.9500 V
CPU HFM (Maximum): 1833.3 MHz = 11.00 x 166.7 MHz @ 1.2250 V [Locked]
CPU Current: 1827.9 MHz = 11.00 x 166.2 MHz @ 1.2250 V
CPU Bus Type: FSB (QDR)
[Cache and TLB]
L1 Cache: Instruction: 32 KBytes, Data: 32 KBytes
L2 Cache: Integrated: 2 MBytes
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 MB Pages, 4-way set associative, 32 entries
|
Citation :
[Computer]
Computer Brand Name: LENOVO IdeaPad Y710
[Motherboard]
Motherboard Model: LENOVO INVALID
Motherboard Chipset: Intel GM965 (Crestline-GM) + ICH8M
Motherboard Slots: 2xPCI, 6xPCI Express x1, 1xPCI Express x16
PCI Express Version Supported: v1.0
USB Version Supported: v2.0
[(G)MCH Features]
X4 DMI Link Width: Supported
Concurrent PCI-E and SDVO: Not Supported
Serial Digital Video Out: Not Supported
Internal Graphics: Supported
PCI Express Port: Supported
DDR2 Frequency Support: 333 MHz (DDR2-666)
FSB Frequency Support: 200 MHz (800 QDR)
[ICH8 Features]
Mobile Features: Supported
Quick Resume Technology: Not Supported
SATA AHCI: Supported
SATA RAID0/1/10: Not Supported
SATA RAID5: Not Supported
6 PCI Express x1 Ports: Supported
USB Per-Port Disable: Supported
[BIOS]
BIOS Manufacturer: Phoenix Technologies
BIOS Date: 03/03/08
BIOS Version: 08ET31WW (0.31 )
EFI BIOS: Not Capable
Super-IO/LPC Chip: Unknown
[General information]
Total Memory Size: 2 GBytes
Total Memory Size [MB]: 2048
[Current Performance Settings]
Maximum Supported Memory Clock: 333.3 MHz
Current Memory Clock: 332.3 MHz (2 : 1 ratio)
Current Timing (tCAS-tRCD-tRP-tRAS): 5.0-5-5-15
Memory Runs At: Single-Channel
Read to Read Delay (tRD_RD) Different Rank: 6T
Write to Write Delay (tWR_WR) Different Rank: 6T
Read to Write Delay (tRD_WR) Same Rank: 7T
Read to Write Delay (tRD_WR) Different Rank: 7T
Write to Read Delay (tWR_RD) Same Rank (tWTR): 3T
Write to Read Delay (tWR_RD) Different Rank: 5T
Read to Precharge Delay (tRTP): 5T
Write to Precharge Delay (tWTP/tWR): 3T
RAS# to RAS# Delay (tRRD): 3T
Refresh Cycle Time (tRFC): 43T
Four Activate Window (tFAW): 17T
Row: 0 - 2048 MB PC2-6400 DDR2-SDRAM Micron Tech. 16HTF25664HY-800E1 ------
[General Module Information]
Module Number: 0
Module Size: 2048 MBytes
Memory Type: DDR2-SDRAM
DIMM Type: SO-DIMM
Error Check/Correction: None
Memory Speed: 400.0 MHz (PC2-6400)
Module Manufacturer: Micron Tech.
Module Model: 16HTF25664HY-800E1
Serial Number: 817502696
Manufacturing Date: Year: 2008, Week: 43
[Module Characteristics]
Module Width: 64-bits
Module Voltage: SSTL 1.8V
SPD Revision: 1.2
Number Of Ranks: 2
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
[Module timing]
Supported Burst Lengths: 4, 8
Refresh Rate: Reduced 0.5x (7.8 us)
Supported CAS Latencies (tCAS): 6.0, 5.0, 4.0
Min. RAS-to-CAS Delay (tRCD): 15.00 ns
Min. Row Precharge Time (tRP): 15.00 ns
Min. RAS Pulse Width (tRAS): 45 ns
Supported Module Timing at 400.0 MHz: 6.0-6-6-18
Supported Module Timing at 333.3 MHz: 5.0-5-5-15
Supported Module Timing at 266.7 MHz: 4.0-4-4-12
Min. Row-Activate To Row-Activate Delay (tRRD): 7.50 ns
Write Recovery Time (tWR): 15.00 ns
Internal write to read command delay (tWTR): 10.00 ns
Internal read to precharge command delay (tRTP): 7.50 ns
Minimum Activate to Activate/Refresh Time (tRC): 60.00 ns
Minimum Refresh to Activate/Refresh Command Period (tRFC): 127.50 ns
Address and Command Setup Time Before Clock (tIS): 0.17 ns
Address and Command Setup Time After Clock (tIH): 0.25 ns
Data Input Setup Time Before Strobe (tDS): 0.05 ns
Data Input Setup Time After Strobe (tDH): 0.12 ns
ATI/AMD Mobility Radeon HD 2600 (M76M) ------------------------------------
[General Information]
Device Name: ATI/AMD Mobility Radeon HD 2600 (M76M)
Original Device Name: ATI/AMD Mobility Radeon HD 2600 (M76M)
Device Class: VGA Compatible Adapter
Revision ID: 0
Bus Number: 1
Device Number: 0
Function Number: 0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_1002&DEV_9581&SUBSYS_3C2D17AA&REV_00
[PCI Express]
Version: 1.0
Maximum Link Width: 16x
Current Link Width: 16x
Maximum Link Speed: 2.5 Gb/s
Current Link Speed: 2.5 Gb/s
Device/Port Type: Legacy PCI Express Endpoint
Slot Implemented: No
Active State Power Management (ASPM) Support: L0s and L1
Active State Power Management (ASPM) Status: L0s and L1 Entry
[System Resources]
Interrupt Line: N/A
Interrupt Pin: INTA#
Memory Base Address 0 D0000000
I/O Base Address 1 2000
Memory Base Address 2 F4000000
[Features]
Bus Mastering: Enabled
Running At 66 MHz: Not Capable
Fast Back-to-Back Transactions: Not Capable
[Driver Information]
Driver Manufacturer: ATI Technologies Inc.
Driver Description: ATI Mobility Radeon HD 2600 (Microsoft Corporation WDDM 1.1)
Driver Provider: ATI Technologies Inc.
Driver Version: 8.56.1.16
Driver Date: 25-Apr-2009
|
La carte vidéo est une carte enfichable de type Mxm 2 une ati radeon 2600 hd 256 mo de ddr , que je vais surement devoir changer aussi.
Donc pour les connaisseurs j'aimerais savoir ce que je peux lui mettre pour qu'il speed un peu plus.
J'ai déjà l'ancien proc de mon acer 7720Z un t7500 qui selon hwinfo est compatible avec le lenovo y710 , mais si je peux lui mettre un plus veloce ca serait pas mal aussi.
Par la meme je cherche le petit clavier (pad numeric ) car celui que j'ai est hs , plus de touche dessus (satané chat qui a voulu faire ces griffes !!!)
Voila j'espere que vous pourrez m'aider.
Merci d'avance.
Message édité par royalc le 12-07-2018 à 13:18:23
|
