Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
1515 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs
  réseaux et sécurité

  serveur apache qui refuse toute connec de l'exterieur

 
 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

serveur apache qui refuse toute connec de l'exterieur

n°755562
mickael de​ psagot
Posté le 24-11-2005 à 13:13:07  profilanswer
 

bonjour a tous!
 
voila:
j'ai installe un serveur apache sur une petite config mandrake (tout en CLI...)
le serveru repond parfaitement aux requetes venu du lan, mais impossible de se connecter via wan.
le router est BIEN configure, le port 80 est bien route vers le serveur!!
 
je me demande s'il y a quelquechose a modifier dans les fichier de conf du server.
 
je patate les fichiers de suite:
 
 
httpd.conf:
 

Code :
  1. ### Main Configuration Section
  2. ### You really shouldn't change these settings unless you're a guru
  3. ###
  4. ServerType standalone
  5. ServerRoot /etc/httpd
  6. ServerName mazar
  7. #LockFile /etc/httpd/httpd.lock
  8. PidFile /var/run/httpd.pid
  9. ScoreBoardFile /etc/httpd/httpd.scoreboard
  10. ErrorLog logs/error_log
  11. LogLevel warn
  12. ResourceConfig /dev/null
  13. AccessConfig /dev/null
  14. DocumentRoot /docs
  17. ### Dynamic Shared Object (DSO) Support
  18. ###
  19. ###
  20. #LoadModule mmap_static_module modules/mod_mmap_static.so
  21. LoadModule env_module         modules/mod_env.so
  22. LoadModule config_log_module  modules/mod_log_config.so
  23. LoadModule agent_log_module   modules/mod_log_agent.so
  24. LoadModule referer_log_module modules/mod_log_referer.so
  25. #LoadModule mime_magic_module  modules/mod_mime_magic.so
  26. LoadModule mime_module        modules/mod_mime.so
  27. LoadModule negotiation_module modules/mod_negotiation.so
  28. LoadModule status_module      modules/mod_status.so
  29. LoadModule info_module        modules/mod_info.so
  30. LoadModule includes_module    modules/mod_include.so
  31. LoadModule autoindex_module   modules/mod_autoindex.so
  32. LoadModule dir_module         modules/mod_dir.so
  33. LoadModule cgi_module         modules/mod_cgi.so
  34. LoadModule asis_module        modules/mod_asis.so
  35. LoadModule imap_module        modules/mod_imap.so
  36. LoadModule action_module      modules/mod_actions.so
  37. #LoadModule speling_module     modules/mod_speling.so
  38. LoadModule userdir_module     modules/mod_userdir.so
  39. LoadModule proxy_module       modules/libproxy.so
  40. LoadModule alias_module       modules/mod_alias.so
  41. LoadModule rewrite_module     modules/mod_rewrite.so
  42. LoadModule access_module      modules/mod_access.so
  43. LoadModule auth_module        modules/mod_auth.so
  44. LoadModule anon_auth_module   modules/mod_auth_anon.so
  45. #LoadModule dbm_auth_module    modules/mod_auth_dbm.so
  46. #LoadModule db_auth_module     modules/mod_auth_db.so
  47. LoadModule digest_module      modules/mod_digest.so
  48. #LoadModule cern_meta_module   modules/mod_cern_meta.so
  49. LoadModule expires_module     modules/mod_expires.so
  50. LoadModule headers_module     modules/mod_headers.so
  51. LoadModule usertrack_module   modules/mod_usertrack.so
  52. #LoadModule example_module     modules/mod_example.so
  53. #LoadModule unique_id_module   modules/mod_unique_id.so
  54. LoadModule setenvif_module    modules/mod_setenvif.so
  55. LoadModule vhost_alias_module modules/mod_vhost_alias.so
  57. #  Reconstruction of the complete module list from all available modules
  58. #  (static and shared ones) to achieve correct module execution order.
  59. #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
  60. ClearModuleList
  61. #AddModule mod_mmap_static.c
  62. AddModule mod_env.c
  63. AddModule mod_log_config.c
  64. AddModule mod_log_agent.c
  65. AddModule mod_log_referer.c
  66. #AddModule mod_mime_magic.c
  67. AddModule mod_mime.c
  68. AddModule mod_negotiation.c
  69. AddModule mod_status.c
  70. AddModule mod_info.c
  71. AddModule mod_include.c
  72. AddModule mod_autoindex.c
  73. AddModule mod_dir.c
  74. AddModule mod_cgi.c
  75. AddModule mod_asis.c
  76. AddModule mod_imap.c
  77. AddModule mod_actions.c
  78. #AddModule mod_speling.c
  79. AddModule mod_userdir.c
  80. AddModule mod_proxy.c
  81. AddModule mod_alias.c
  82. AddModule mod_rewrite.c
  83. AddModule mod_access.c
  84. AddModule mod_auth.c
  85. AddModule mod_auth_anon.c
  86. #AddModule mod_auth_dbm.c
  87. #AddModule mod_auth_db.c
  88. AddModule mod_digest.c
  89. #AddModule mod_cern_meta.c
  90. AddModule mod_expires.c
  91. AddModule mod_headers.c
  92. AddModule mod_usertrack.c
  93. #AddModule mod_example.c
  94. #AddModule mod_unique_id.c
  95. AddModule mod_so.c
  96. AddModule mod_setenvif.c
  97. AddModule mod_vhost_alias.c
  99. ###
  100. ### Global Configuration
  101. ###
  102. # We now support multiple apache configurations on the same server. In
  103. # common.conf, we put all directives that are common to all implementations
  104. # (httpd, httpd-perl, etc.)
  105. Include /etc/httpd/conf/commonhttpd.conf
  108. ###
  109. ### IP Address/Port and Proxied configuration section
  110. ###
  111. # The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you
  112. # are using a proxy or accelerator, like the Apache-SGI or khttpd, so that
  113. # the fast web server serves static content while Apache handles the
  114. # cgi or php files
  116. #BindAddress *
  117. <IfDefine APACHEPROXIED>
  118.     Port 8080
  119.     Listen 8080
  120. </IfDefine>
  121. <IfDefine !APACHEPROXIED>
  122.     Port 80
  123.     Listen 80
  124. </IfDefine>
  126. # Likewise, we can set apache as the server by default and send perl
  127. # requests via ProxyPass to apache-mod_perl. It increases performance
  128. # since the perl interpreter is only used for perl and the standard apache
  129. # does all the html and image files, with a smaller footprint.
  130. #
  131. # If you install apache and apache-mod_perl, this is the default config.
  132. # If you don't want two web servers to use perl, uninstall apache, and
  133. # apache-mod_perl will not be proxied.
  135. <IfDefine PERLPROXIED>
  136.     RewriteEngine on
  137.     RewriteRule ^proxy:.*  -  [F]
  138.     RewriteRule ^(.*\/perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
  139.     RewriteRule ^(.*\/cgi-perl\/.*)$  http://%{HTTP_HOST}:8200$1 [P]
  140. </IfDefine>
  142. ###
  143. ### Log configuration Section
  144. ###
  146. #Single logfile with access, agent and referer information
  147. #This is the default, if vlogs are not defined for the main server
  148. CustomLog logs/access_log combined env=!VLOG
  149. #If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry
  150. CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG
  153. ###
  154. ### Virtual Hosts
  155. ###
  156. # We include different templates for Virtual Hosting. Have a look in the
  157. # vhosts directory and modify to suit your needs.
  158. Include conf/vhosts/Vhosts.conf
  159. #Include conf/vhosts/DynamicVhosts.conf
  160. #Include conf/vhosts/VirtualHomePages.conf
  163. ###
  164. ### Performance settings Section
  165. ###
  166. #
  167. # Timeout: The number of seconds before receives and sends time out.
  168. #
  169. Timeout 300
  171. #
  172. # KeepAlive: Whether or not to allow persistent connections (more than
  173. # one request per connection). Set to "Off" to deactivate.
  174. #
  175. KeepAlive On
  177. #
  178. # MaxKeepAliveRequests: The maximum number of requests to allow
  179. # during a persistent connection. Set to 0 to allow an unlimited amount.
  180. # We recommend you leave this number high, for maximum performance.
  181. #
  182. MaxKeepAliveRequests 100
  184. #
  185. # KeepAliveTimeout: Number of seconds to wait for the next request from the
  186. # same client on the same connection.
  187. #
  188. KeepAliveTimeout 15
  190. #
  191. # Server-pool size regulation.  Rather than making you guess how many
  192. # server processes you need, Apache dynamically adapts to the load it
  193. # sees --- that is, it tries to maintain enough server processes to
  194. # handle the current load, plus a few spare servers to handle transient
  195. # load spikes (e.g., multiple simultaneous requests from a single
  196. # Netscape browser).
  197. #
  198. # It does this by periodically checking how many servers are waiting
  199. # for a request.  If there are fewer than MinSpareServers, it creates
  200. # a new spare.  If there are more than MaxSpareServers, some of the
  201. # spares die off.  The default values are probably OK for most sites.
  202. #
  203. MinSpareServers 4
  204. MaxSpareServers 10
  206. #
  207. # Number of servers to start initially --- should be a reasonable ballpark
  208. # figure.
  209. #
  210. StartServers 4
  212. #
  213. # Limit on total number of servers running, i.e., limit on the number
  214. # of clients who can simultaneously connect --- if this limit is ever
  215. # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
  216. # It is intended mainly as a brake to keep a runaway server from taking
  217. # the system with it as it spirals down...
  218. #
  219. MaxClients 150
  221. #
  222. # MaxRequestsPerChild: the number of requests each child process is
  223. # allowed to process before the child dies.  The child will exit so
  224. # as to avoid problems after prolonged use when Apache (and maybe the
  225. # libraries it uses) leak memory or other resources.  On most systems, this
  226. # isn't really needed, but a few (such as Solaris) do have notable leaks
  227. # in the libraries. For these platforms, set to something like 10000
  228. # or so; a setting of 0 means unlimited.
  229. #
  230. # NOTE: This value does not include keepalive requests after the initial
  231. #       request per connection. For example, if a child process handles
  232. #       an initial request and 10 subsequent "keptalive" requests, it
  233. #       would only count as 1 request towards this limit.
  234. #
  235. MaxRequestsPerChild 500


 
 
 
commonhttpd.conf:
 

Code :
  1. ### Common server configuration
  2. #
  3. User apache
  4. Group apache
  6. #
  7. # ServerAdmin: Your address, where problems with the server should be
  8. # e-mailed.  This address appears on some server-generated pages, such
  9. # as error documents.
  10. #
  11. ServerAdmin root@localhost
  13. # DocumentRoot: The directory out of which you will serve your
  14. # documents. By default, all requests are taken from this directory, but
  15. # symbolic links and aliases may be used to point to other locations.
  16. # DO NOT MODIFY THIS ONE, USE httpd.conf and httpd-perl.conf
  17. #DocumentRoot /var/www/html
  20. #
  21. # Each directory to which Apache has access, can be configured with respect
  22. # to which services and features are allowed and/or disabled in that
  23. # directory (and its subdirectories).
  24. #
  25. # First, we configure the "default" to be a very restrictive set of
  26. # permissions. 
  27. #
  28. # Also, for security, we disable indexes globally
  29. #
  30. #<Directory />
  31. #    Options -Indexes FollowSymLinks
  32. #    AllowOverride None
  33. #</Directory>
  34. <directory />
  35. Order allow,deny
  36. Allow from all
  37. </directory>
  39. #Restricted set of options
  40. <Directory /docs/>
  41.   Options Indexes FollowSymlinks Multiviews
  42.   AllowOverride All
  43.   <IfModule mod_access.c>
  44.     Order allow,deny
  45.     Allow from all
  46.   </IfModule>
  47. </Directory>
  50. #
  51. # Note that from this point forward you must specifically allow
  52. # particular features to be enabled - so if something's not working as
  53. # you might expect, make sure that you have specifically enabled it
  54. # below.
  55. #
  58. #
  59. # UserDir: The name of the directory which is appended onto a user's home
  60. # directory if a ~user request is received.
  61. #
  62. <IfModule mod_userdir.c>
  63.     UserDir public_html
  64. </IfModule>
  66. #
  67. # DirectoryIndex: Name of the file or files to use as a pre-written HTML
  68. # directory index.  Separate multiple entries with spaces.
  69. #
  70. <IfModule mod_dir.c>
  71.     DirectoryIndex index.html index.html.var index.php index.php3 index.shtml index.cgi index.pl index.htm Default.htm default.htm index.xml
  72. </IfModule>
  74. #
  75. # AccessFileName: The name of the file to look for in each directory
  76. # for access control information.
  77. #
  78. AccessFileName .htaccess
  80. #
  81. # The following lines prevent .htaccess files from being viewed by
  82. # Web clients.  Since .htaccess files often contain authorization
  83. # information, access is disallowed for security reasons.  Comment
  84. # these lines out if you want Web visitors to see the contents of
  85. # .htaccess files.  If you change the AccessFileName directive above,
  86. # be sure to make the corresponding changes here.
  87. #
  88. # Also, folks tend to use names such as .htpasswd for password
  89. # files, so this will protect those as well.
  90. #
  91. <IfModule mod_access.c>
  92. <Files ~ "^\.ht">
  93.     Order allow,deny
  94.     Deny from all
  95. </Files>
  96. </IfModule>
  98. #
  99. # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
  100. # document that was negotiated on the basis of content. This asks proxy
  101. # servers not to cache the document. Uncommenting the following line disables
  102. # this behavior, and proxies will be allowed to cache the documents.
  103. #
  104. #CacheNegotiatedDocs
  106. #
  107. # UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
  108. # Apache needs to construct a self-referencing URL (a URL that refers back
  109. # to the server the response is coming from) it will use ServerName and
  110. # Port to form a "canonical" name.  With this setting off, Apache will
  111. # use the hostname:port that the client supplied, when possible.  This
  112. # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
  113. #
  114. UseCanonicalName On
  116. #
  117. # TypesConfig describes where the mime.types file (or equivalent) is
  118. # to be found.
  119. #
  120. <IfModule mod_mime.c>
  121.     TypesConfig conf/apache-mime.types
  122. </IfModule>
  124. #
  125. # DefaultType is the default MIME type the server will use for a document
  126. # if it cannot otherwise determine one, such as from filename extensions.
  127. # If your server contains mostly text or HTML documents, "text/plain" is
  128. # a good value.  If most of your content is binary, such as applications
  129. # or images, you may want to use "application/octet-stream" instead to
  130. # keep browsers from trying to display binary files as though they are
  131. # text.
  132. #
  133. DefaultType text/plain
  135. #
  136. # The mod_mime_magic module allows the server to use various hints from the
  137. # contents of the file itself to determine its type.  The MIMEMagicFile
  138. # directive tells the module where the hint definitions are located.
  139. # mod_mime_magic is not part of the default server (you have to add
  140. # it yourself with a LoadModule [see the DSO paragraph in the 'Global
  141. # Environment' section], or recompile the server and include mod_mime_magic
  142. # as part of the configuration), so it's enclosed in an <IfModule> container.
  143. # This means that the MIMEMagicFile directive will only be processed if the
  144. # module is part of the server.
  145. #
  146. <IfModule mod_mime_magic.c>
  147.     MIMEMagicFile conf/magic
  148. </IfModule>
  150. #
  151. # HostnameLookups: Log the names of clients or just their IP addresses
  152. # e.g., www.apache.org (on) or 204.62.129.132 (off).
  153. # The default is off because it'd be overall better for the net if people
  154. # had to knowingly turn this feature on, since enabling it means that
  155. # each client request will result in AT LEAST one lookup request to the
  156. # nameserver.
  157. #
  158. HostnameLookups Off
  160. # EnableMMAP: Control whether memory-mapping is used to deliver
  161. # files (assuming that the underlying OS supports it).
  162. # The default is on; turn this off if you serve from NFS-mounted
  163. # filesystems.  On some systems, turning it off (regardless of
  164. # filesystem) can improve performance; for details, please see
  165. # http://httpd.apache.org/docs-2.0/m [...] enablemmap
  166. #
  167. # EnableMMAP off
  169. #
  170. # EnableSendfile: Control whether the sendfile kernel support is
  171. # used  to deliver files (assuming that the OS supports it).
  172. # The default is on; turn this off if you serve from NFS-mounted
  173. # filesystems.  Please see
  174. # http://httpd.apache.org/docs-2.0/m [...] lesendfile
  175. #
  176. #EnableSendfile off
  178. # The following directives define some format nicknames for use with
  179. # a CustomLog directive (see below).
  180. #
  181. <IfModule mod_log_config.c>
  182. LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
  183. LogFormat "%h %l %u %t \"%r\" %>s %b" common
  184. LogFormat "%{Referer}i -> %U" referer
  185. LogFormat "%{User-agent}i" agent
  186. LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
  187. LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
  189.     <IfModule mod_logio.c>
  191.     # You need to enable mod_logio.c to use %I and %O
  192.     #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
  194.     </IfModule>
  196. #
  197. # The location and format of the access logfile (Common Logfile Format).
  198. #CustomLog logs/access_log common
  200. #
  201. # If you would like to have agent and referer logfiles, uncomment the
  202. # following directives.
  203. #
  204. #CustomLog logs/referer_log referer
  205. #CustomLog logs/agent_log agent
  207. #
  208. # If you prefer a single logfile with access, agent, and referer information
  209. # (Combined Logfile Format) you can use the following directive.
  210. #
  211. #CustomLog logs/access_log combined
  212. </IfModule>
  214. #
  215. # ServerTokens
  216. # This directive configures what you return as the Server HTTP response
  217. # Header. The default is 'Full' which sends information about the OS-Type
  218. # and compiled in modules.
  219. # Set to one of:  Full | OS | Minor | Minimal | Major | Prod
  220. # where Full conveys the most information, and Prod the least.
  221. #
  222. ServerTokens Full
  224. #
  225. # Optionally add a line containing the server version and virtual host
  226. # name to server-generated pages (error documents, FTP directory listings,
  227. # mod_status and mod_info output etc., but not CGI generated documents).
  228. # Set to "EMail" to also include a mailto: link to the ServerAdmin.
  229. # Set to one of:  On | Off | EMail
  230. #
  231. ServerSignature On
  233. #
  234. # Aliases: Add here as many aliases as you need (with no limit). The format is
  235. # Alias fakename realname
  236. #
  237. <IfModule mod_alias.c>
  239.     #
  240.     # Note that if you include a trailing / on fakename then the server will
  241.     # require it to be present in the URL.  So "/icons" isn't aliased in this
  242.     # example, only "/icons/"..
  243.     #
  244.     Alias /icons/ /var/www/icons/
  245.     Alias /doc /usr/share/doc
  248.     #
  249.     # ScriptAlias: This controls which directories contain server scripts.
  250.     # ScriptAliases are essentially the same as Aliases, except that
  251.     # documents in the realname directory are treated as applications and
  252.     # run by the server when requested rather than as documents sent to the client.
  253.     # The same rules about trailing "/" apply to ScriptAlias directives as to
  254.     # Alias.
  255.     #
  256.     ScriptAlias /cgi-bin/ /var/www/cgi-bin/
  257.     ScriptAlias /protected-cgi-bin/ /var/www/protected-cgi-bin/
  259.     <IfModule mod_perl.c>
  260. #Provide two aliases to the same cgi-bin directory,
  261. #to see the effects of the 2 different mod_perl modes
  262. #for Apache::Registry Mode
  263. Alias /perl/ /var/www/perl/
  264. #for Apache::Perlrun Mode
  265. Alias /cgi-perl/ /var/www/perl/
  266.     </IfModule>
  269. </IfModule>
  270. # End of aliases.
  272. #
  273. # Redirect allows you to tell clients about documents which used to exist in
  274. # your server's namespace, but do not anymore. This allows you to tell the
  275. # clients where to look for the relocated document.
  276. # Format: Redirect old-URI new-URL
  277. #
  279. #
  280. # Directives controlling the display of server-generated directory listings.
  281. #
  282. <IfModule mod_autoindex.c>
  284.     #
  285.     # FancyIndexing is whether you want fancy directory indexing or standard
  286.     #
  287.     <IfDefine !APACHE2>
  288.       IndexOptions FancyIndexing NameWidth=*
  289.     </IfDefine>
  290.     <IfDefine APACHE2>
  291.       IndexOptions FancyIndexing VersionSort NameWidth=*
  292.     </IfDefine>
  293.     #
  294.     # AddIcon* directives tell the server which icon to show for different
  295.     # files or filename extensions.  These are only displayed for
  296.     # FancyIndexed directories.
  297.     #
  298.     AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
  300.     AddIconByType (TXT,/icons/text.png) text/*
  301.     AddIconByType (IMG,/icons/image2.png) image/*
  302.     AddIconByType (SND,/icons/sound2.png) audio/*
  303.     AddIconByType (VID,/icons/movie.png) video/*
  305.     AddIcon /icons/binary.png .bin .exe
  306.     AddIcon /icons/binhex.png .hqx
  307.     AddIcon /icons/tar.png .tar
  308.     AddIcon /icons/world2.png .wrl .wrl.gz .vrml .vrm .iv
  309.     AddIcon /icons/compressed.png .Z .z .tgz .gz .zip .bz2
  310.     AddIcon /icons/a.png .ps .ai .eps
  311.     AddIcon /icons/layout.png .html .shtml .htm .pdf
  312.     AddIcon /icons/text.png .txt
  313.     AddIcon /icons/c.png .c
  314.     AddIcon /icons/p.png .pl .py .php .php3
  315.     AddIcon /icons/f.png .for
  316.     AddIcon /icons/dvi.png .dvi
  317.     AddIcon /icons/uuencoded.png .uu
  318.     AddIcon /icons/script.png .conf .sh .shar .csh .ksh .tcl
  319.     AddIcon /icons/tex.png .tex
  320.     AddIcon /icons/bomb.png core
  322.     AddIcon /icons/back.png ..
  323.     AddIcon /icons/hand.right.png README
  324.     AddIcon /icons/folder.png ^^DIRECTORY^^
  325.     AddIcon /icons/blank.png ^^BLANKICON^^
  327.     #
  328.     # DefaultIcon is which icon to show for files which do not have an icon
  329.     # explicitly set.
  330.     #
  331.     DefaultIcon /icons/unknown.png
  333.     #
  334.     # AddDescription allows you to place a short description after a file in
  335.     # server-generated indexes.  These are only displayed for FancyIndexed
  336.     # directories.
  337.     # Format: AddDescription "description" filename
  338.     #
  339.     #AddDescription "GZIP compressed document" .gz
  340.     #AddDescription "tar archive" .tar
  341.     #AddDescription "GZIP compressed tar archive" .tgz
  343.     #
  344.     # ReadmeName is the name of the README file the server will look for by
  345.     # default, and append to directory listings.
  346.     #
  347.     # HeaderName is the name of a file which should be prepended to
  348.     # directory indexes.  
  349.     #
  350.     # If MultiViews are amongst the Options in effect, the server will
  351.     # first look for name.html and include it if found.  If name.html
  352.     # doesn't exist, the server will then look for name.txt and include
  353.     # it as plaintext if found.
  354.     #
  355.     ReadmeName README.html
  356.     HeaderName HEADER.html
  358.     #
  359.     # IndexIgnore is a set of filenames which directory indexing should ignore
  360.     # and not include in the listing.  Shell-style wildcarding is permitted.
  361.     #
  362.     IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t
  364. </IfModule>
  365. # End of indexing directives.
  367. #
  368. # Document types.
  369. #
  370. <IfModule mod_mime.c>
  372.     #
  373.     # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
  374.     # information on the fly. Note: Not all browsers support this.
  375.     # Despite the name similarity, the following Add* directives have nothing
  376.     # to do with the FancyIndexing customization directives above.
  377.     #
  378.     AddEncoding x-compress Z
  379.     AddEncoding x-gzip gz tgz
  381.     #
  382.     # AddLanguage allows you to specify the language of a document. You can
  383.     # then use content negotiation to give a browser a file in a language
  384.     # it can understand.   
  385.     #
  386.     # Note 1: The suffix does not have to be the same as the language  
  387.     # keyword --- those with documents in Polish (whose net-standard  
  388.     # language code is pl) may wish to use "AddLanguage pl .po" to  
  389.     # avoid the ambiguity with the common suffix for perl scripts.
  390.     #
  391.     # Note 2: The example entries below illustrate that in quite
  392.     # some cases the two character 'Language' abbreviation is not
  393.     # identical to the two character 'Country' code for its country,
  394.     # E.g. 'Danmark/dk' versus 'Danish/da'.
  395.     #
  396.     # Note 3: In the case of 'ltz' we violate the RFC by using a three char  
  397.     # specifier. But there is 'work in progress' to fix this and get  
  398.     # the reference data for rfc1766 cleaned up.
  399.     #
  400.     # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
  401.     # French (fr) - German (de) - Greek-Modern (el)
  402.     # Italian (it) - Korean (kr) - Norwegian (no)
  403.     # Portugese (pt) - Luxembourgeois* (ltz)
  404.     # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
  405.     # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
  406.     # Russian (ru)
  407.     #
  408.     AddLanguage ca .ca
  409.     AddLanguage cs .cz .cs
  410.     AddLanguage da .dk
  411.     AddLanguage de .de
  412.     AddLanguage el .el
  413.     AddLanguage en .en
  414.     AddLanguage eo .eo
  415.     AddLanguage es .es
  416.     AddLanguage et .ee
  417.     AddLanguage fr .fr
  418.     AddLanguage he .he
  419.     AddLanguage hr .hr
  420.     AddLanguage it .it
  421.     AddLanguage ja .ja
  422.     AddLanguage ko .ko
  423.     AddLanguage kr .kr
  424.     AddLanguage ltz .ltz
  425.     AddLanguage ltz .lu
  426.     AddLanguage nl .nl
  427.     AddLanguage nn .nn
  428.     AddLanguage no .no
  429.     AddLanguage pl .po
  430.     AddLanguage pt-br .pt-br
  431.     AddLanguage pt .pt
  432.     AddLanguage ru .ru
  433.     AddLanguage sv .sv
  434.     AddLanguage zh-TW .zh-tw
  435.     AddLanguage eo .eo
  437.     #
  438.     # Specify a default charset for all pages sent out. This is
  439.     # always a good idea and opens the door for future internationalisation
  440.     # of your web site, should you ever want it. Specifying it as
  441.     # a default does little harm; as the standard dictates that a page
  442.     # is in iso-8859-1 (latin1) unless specified otherwise i.e. you
  443.     # are merely stating the obvious. There are also some security
  444.     # reasons in browsers, related to javascript and URL parsing
  445.     # which encourage you to always set a default char set.
  446.     #
  447.     #AddDefaultCharset ISO-8859-1
  448.     # JMD 2003/09/15 Change to off, since it overrides the META tags
  449.     AddDefaultCharset Off
  451.     # LanguagePriority allows you to give precedence to some languages
  452.     # in case of a tie during content negotiation.
  453.     #
  454.     # Just list the languages in decreasing order of preference. We have
  455.     # more or less alphabetized them here. You probably want to change this.
  456.     #
  457.     <IfModule mod_negotiation.c>
  458.         LanguagePriority en cs de es fr it da nl et el ja kr no pl pt pt-br ru ltz ca sv tw ro
  459. # ForceLanguagePriority Prefer Fallback
  460.     </IfModule>
  462.     #
  463.     # ForceLanguagePriority allows you to serve a result page rather than
  464.     # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
  465.     # [in case no accepted languages matched the available variants]
  466.     #
  467.     <IfModule mod_negotiation.c>
  468. #FUK      ForceLanguagePriority Prefer Fallback
  469.     </IfModule>
  471.     #
  472.     # Commonly used filename extensions to character sets. You probably
  473.     # want to avoid clashes with the language extensions, unless you
  474.     # are good at carefully testing your setup after each change.
  475.     # See http://www.iana.org/assignments/character-sets for the
  476.     # official list of charset names and their respective RFCs.
  477.     #
  478.     AddCharset ISO-8859-1  .iso8859-1  .latin1
  479.     AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
  480.     AddCharset ISO-8859-3  .iso8859-3  .latin3
  481.     AddCharset ISO-8859-4  .iso8859-4  .latin4
  482.     AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
  483.     AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
  484.     AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
  485.     AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
  486.     AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
  487.     AddCharset ISO-2022-JP .iso2022-jp .jis
  488.     AddCharset ISO-2022-KR .iso2022-kr .kis
  489.     AddCharset ISO-2022-CN .iso2022-cn .cis
  490.     AddCharset Big5        .Big5       .big5
  491.     # For russian, more than one charset is used (depends on client, mostly):
  492.     AddCharset WINDOWS-1251 .cp-1251   .win-1251
  493.     AddCharset CP866       .cp866
  494.     AddCharset KOI8-r      .koi8-r .koi8-ru
  495.     AddCharset KOI8-ru     .koi8-uk .ua
  496.     AddCharset ISO-10646-UCS-2 .ucs2
  497.     AddCharset ISO-10646-UCS-4 .ucs4
  498.     AddCharset UTF-8       .utf8
  500.     # The set below does not map to a specific (iso) standard
  501.     # but works on a fairly wide range of browsers. Note that
  502.     # capitalization actually matters (it should not, but it
  503.     # does for some browsers).
  504.     #
  505.     # See http://www.iana.org/assignments/character-sets
  506.     # for a list of sorts. But browsers support few.
  507.     #
  508.     AddCharset GB2312      .gb2312 .gb  
  509.     AddCharset utf-7       .utf7
  510.     AddCharset utf-8       .utf8
  511.     AddCharset big5        .big5 .b5
  512.     AddCharset EUC-TW      .euc-tw
  513.     AddCharset EUC-JP      .euc-jp
  514.     AddCharset EUC-KR      .euc-kr
  515.     AddCharset shift_jis   .sjis
  517.     #
  518.     # AddType allows you to tweak mime.types without actually editing it, or to
  519.     # make certain files to be certain types.
  520.     #
  521.     AddType application/x-tar .tgz
  522.     AddType image/x-icon .ico
  524.     #
  525.     # AddHandler allows you to map certain file extensions to "handlers",
  526.     # actions unrelated to filetype. These can be either built into the server
  527.     # or added with the Action command (see below)
  528.     #
  529.     # If you want to use server side includes, or CGI outside
  530.     # ScriptAliased directories, uncomment the following lines.
  531.     #
  532.     # To use CGI scripts:
  533.     #
  534.     AddHandler cgi-script .cgi
  536.     #
  537.     # For type maps (negotiated resources):
  538.     # (This is enabled by default to allow the Apache "It Worked" page
  539.     #  to be distributed in multiple languages.)
  540.     #
  541.     AddHandler type-map var
  543.     # Filters allow you to process content before it is sent to the client.
  544.     #
  545.     # To parse .shtml files for server-side includes (SSI):
  546.     # (You will also need to add "Includes" to the "Options" directive.)
  547.     #
  548.     AddType text/html .shtml
  549.     <IfDefine APACHE2>
  550.       AddOutputFilter INCLUDES .shtml
  551.     </IfDefine>
  552.     <IfDefine !APACHE2>
  553.       AddHandler server-parsed .shtml
  554.     </IfDefine>
  555.     #
  556.     # Uncomment the following line to enable Apache's send-asis HTTP file
  557.     # feature
  558.     #
  559.     #AddHandler send-as-is asis
  561.     #
  562.     # If you wish to use server-parsed imagemap files, use
  563.     #
  564.     AddHandler imap-file map
  566.     #
  567.     # To enable type maps, you might want to use
  568.     #
  569.     #AddHandler type-map var
  571. </IfModule>
  572. # End of document types.
  574. #
  575. # Action lets you define media types that will execute a script whenever
  576. # a matching file is called. This eliminates the need for repeated URL
  577. # pathnames for oft-used CGI file processors.
  578. # Format: Action media/type /cgi-script/location
  579. # Format: Action handler-name /cgi-script/location
  580. #
  582. #
  583. # Putting this all together, we can internationalize error responses.
  584. #
  585. # We use Alias to redirect any /error/HTTP_<error>.html.var response to
  586. # our collection of by-error message multi-language collections.  We use  
  587. # includes to substitute the appropriate text.
  588. #
  589. # You can modify the messages' appearance without changing any of the
  590. # default HTTP_<error>.html.var files by adding the line:
  591. #
  592. #   Alias /error/include/ "/your/include/path/"
  593. #
  594. # which allows you to create your own set of files by starting with the
  595. # /include/ files and copying them to /your/include/path/,  
  596. # even on a per-VirtualHost basis.  The default include files will display
  597. # your Apache version number and your ServerAdmin email address regardless
  598. # of the setting of ServerSignature.
  599. #
  600. # The internationalized error documents require mod_alias, mod_include
  601. # and mod_negotiation.  To activate them, uncomment the following 30 lines.
  603. #    Alias /error/ "/var/www/error"
  604. #
  605. #    <Directory "/var/www/error">
  606. #        AllowOverride None
  607. #        Options IncludesNoExec
  608. #        AddOutputFilter Includes html
  609. #        AddHandler type-map var
  610. #        Order allow,deny
  611. #        Allow from all
  612. #        LanguagePriority en es de fr sv
  613. #        ForceLanguagePriority Prefer Fallback
  614. #    </Directory>
  615. #
  616. #    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
  617. #    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
  618. #    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
  619. #    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
  620. #    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
  621. #    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
  622. #    ErrorDocument 410 /error/HTTP_GONE.html.var
  623. #    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
  624. #    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
  625. #    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
  626. #    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
  627. #    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
  628. #    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
  629. #    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
  630. #    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
  631. #    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
  632. #    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
  634. # Customizable error responses come in three flavors:
  635. #
  636. #    1) plain text
  637. #ErrorDocument 500 "The server made a boo boo."
  638. #
  639. #    2) local redirects
  640. #ErrorDocument 404 /missing.html
  641. #  to redirect to local URL /missing.html
  642. #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  643. #  N.B.: You can redirect to a script or a document using server-side-includes.
  644. #
  645. #    3) external redirects
  646. #ErrorDocument 402 http://www.example.com/subscription_info.html
  647. #  N.B.: Many of the environment variables associated with the original
  648. #  request will *not* be available to such a script.
  650. ## This should be changed to the ServerRoot/manual/.  The alias provides
  651. ## the manual, even if you choose to move your DocumentRoot.  You may comment
  652. ## this out if you do not care for the documentation.
  653. ##
  654. #AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "/var/www/manual$1"
  655. #
  656. #<Directory "/var/www/manual">
  657. #    Options Indexes
  658. #    AllowOverride None
  659. #    Order allow,deny
  660. #    Allow from all
  661. #
  662. #    <Files *.html>
  663. #        SetHandler type-map
  664. #    </Files>
  665. #
  666. #    SetEnvIf Request_URI ^/manual/de/ prefer-language=de
  667. #    SetEnvIf Request_URI ^/manual/en/ prefer-language=en
  668. #    SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
  669. #    SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
  670. #    SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
  671. #    SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
  672. #    RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
  673. #</Directory>
  675. #
  676. # ScriptAlias: This controls which directories contain server scripts.
  679. <Location /manual>
  680. Options Multiviews
  681. ErrorDocument 404 "The document you requested has not been installed on your system. Please install either apache-manual or apache2-manual RPMs.
  682. </Location>
  683. <Location /manual-2.0>
  684. Options Multiviews
  685. ErrorDocument 404 "The document you requested has not been installed on your system. Please install the apache2-manual package.
  686. </Location>
  687. <Location /manual-1.3>
  688. Options Multiviews
  689. ErrorDocument 404 "The document you requested has not been installed on your system. Please install the apache-manual package.
  690. </Location>
  692. #
  693. # Customize behaviour based on the browser
  694. #
  695. <IfModule mod_setenvif.c>
  697.     #
  698.     # The following directives modify normal HTTP response behavior to
  699.     # handle known problems with browser implementations.
  700.     #
  701.     BrowserMatch "Mozilla/2" nokeepalive
  702.     BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
  703.     BrowserMatch "RealPlayer 4\.0" force-response-1.0
  704.     BrowserMatch "Java/1\.0" force-response-1.0
  705.     BrowserMatch "JDK/1\.0" force-response-1.0
  706.      
  707.     #
  708.     # The following directive disables redirects on non-GET requests for
  709.     # a directory that does not include the trailing slash.  This fixes a
  710.     # problem with Microsoft WebFolders which does not appropriately handle
  711.     # redirects for folders with DAV methods.
  712.     #
  713.     BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carfully
  714.     BrowserMatch "^WebDrive" redirect-carefully
  715.     BrowserMatch "^gnome-vfs" redirect-carefully
  717. </IfModule>
  718. # End of browser customization directives
  720. #
  721. # Allow server status reports, with the URL of http://servername/server-status
  722. # Change the ".your_domain.com" to match your domain to enable.
  723. #
  724. <IfModule mod_status.c>
  725.     <Location /server-status>
  726.         SetHandler server-status
  727.         <IfModule mod_access.c>
  728.           Order deny,allow
  729.           Deny from all
  730.           allow from 127.0.0.1
  731.           #Allow from .your_domain.com
  732.         </IfModule>
  733.     </Location>
  734. #
  735. # ExtendedStatus controls whether Apache will generate "full" status
  736. # information (ExtendedStatus On) or just basic information (ExtendedStatus
  737. # Off) when the "server-status" handler is called. The default is Off.
  738. #
  739. #ExtendedStatus On
  740. </IfModule>
  742. #
  743. # Allow remote server configuration reports, with the URL of
  744. # http://servername/server-info (requires that mod_info.c be loaded).
  745. # Change the ".your_domain.com" to match your domain to enable.
  746. #
  747. <IfModule mod_info.c>
  748.     <Location /server-info>
  749. SetHandler server-info
  750.         <IfModule mod_access.c>
  751.      Order deny,allow
  752.   Deny from all
  753.           allow from 127.0.0.1
  754. #   Allow from .your_domain.com
  755.         </IfModule>
  756.     </Location>
  757. </IfModule>
  759. <IfModule mod_perl.c>
  760.     <Location /perl-status>
  761. SetHandler perl-script
  762. <IfDefine !APACHE2>
  763.   PerlHandler Apache::Status
  764. </IfDefine>
  765. <IfDefine APACHE2>
  766.   PerlResponseHandler Apache::Status
  767. </IfDefine>
  768.         <IfModule mod_access.c>
  769.   Order deny,allow
  770.   Deny from all
  771.   Allow from 127.0.0.1
  772.         </IfModule>
  773.     </Location>
  774. </IfModule>
  776. #
  777. # There have been reports of people trying to abuse an old bug from pre-1.1
  778. # days.  This bug involved a CGI script distributed as a part of Apache.
  779. # By uncommenting these lines you can redirect these attacks to a logging  
  780. # script on phf.apache.org.  Or, you can record them yourself, using the script
  781. # support/phf_abuse_log.cgi.
  782. #
  783. #<Location /cgi-bin/phf*>
  784. #    Deny from all
  785. #    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
  786. #</Location>
  788. <IfModule mod_include.c>
  789. #    XBitHack on
  790. </IfModule>
  792. #
  793. # This should be changed to whatever you set DocumentRoot to.
  794. #
  795. <Directory /var/www/html>
  797. #
  798. # This may also be "None", "All", or any combination of "Indexes",
  799. # "Includes", "FollowSymLinks", "SymLinksifOwnerMatch", "ExecCGI", or "MultiViews".
  800. #
  801. # Note that "MultiViews" must be named *explicitly* --- "Options All"
  802. # doesn't give it to you.
  803. #
  804.     Options -Indexes FollowSymLinks MultiViews
  806. #
  807. # This controls which options the .htaccess files in directories can
  808. # override. Can also be "All", or any combination of "Options", "FileInfo",  
  809. # "AuthConfig", and "Limit"
  810. #
  811.     AllowOverride All
  813. #
  814. # Controls who can get stuff from this server.
  815. #
  816.     <IfModule mod_access.c>
  817.       Order allow,deny
  818.       Allow from all
  819.     </IfModule>
  820. </Directory>
  822. <Directory /var/www/perl>
  823.     AllowOverride All
  824.     Options -Indexes FollowSymLinks MultiViews ExecCGI
  825.     <IfModule mod_access.c>
  826.       Order allow,deny
  827.       Allow from all
  828.     </IfModule>
  829. </Directory>
  831. <IfModule mod_cgid.c>
  832. #
  833. # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
  834. # for setting UNIX socket for communicating with cgid.
  835. #
  836. #Scriptsock            /cgisock
  837. </IfModule>
  839. <Directory /var/www/cgi-bin>
  840.     AllowOverride All
  841.     Options ExecCGI
  842.     <IfModule mod_access.c>
  843.       Order allow,deny
  844.       Allow from all
  845.     </IfModule>
  846. </Directory>
  848. <Directory /var/www/protected-cgi-bin>
  849.     AllowOverride All
  850.     Options ExecCGI
  851.     <IfModule mod_access.c>
  852.       Order deny,allow
  853.       Deny from all
  854.       Allow from 127.0.0.1
  855.       #allow from .your_domain.com
  856.     </IfModule>
  857. </Directory>
  859. #
  860. # Control access to UserDir directories.  The following is an example
  861. # for a site where these directories are restricted to read-only.
  862. #
  863. #<Directory /home/*/public_html>
  864. #    AllowOverride FileInfo AuthConfig Limit
  865. #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
  866. #    <Limit GET POST OPTIONS PROPFIND>
  867. #        Order allow,deny
  868. #        Allow from all
  869. #    </Limit>
  870. #    <LimitExcept GET POST OPTIONS PROPFIND>
  871. #        Order deny,allow
  872. #        Deny from all
  873. #    </LimitExcept>
  874. #</Directory>
  876. # These settings are pretty flexible, and allow for Frontpage and XSSI
  877. <Directory /home/*/public_html>
  878.     AllowOverride All
  879.     Options MultiViews -Indexes Includes FollowSymLinks
  880.     <IfModule mod_access.c>
  881.       Order allow,deny
  882.       Allow from all
  883.     </IfModule>
  884. </Directory>
  886. <Directory /home/*/public_html/cgi-bin>
  887.     Options +ExecCGI -Includes -Indexes
  888.     SetHandler cgi-script
  889.     <IfModule mod_access.c>
  890.       Order allow,deny
  891.       Allow from all
  892.     </IfModule>
  893. </Directory>
  896. <IfModule mod_perl.c>
  897.     <Directory /home/*/public_html/perl>
  898. SetHandler perl-script
  899. <IfDefine !APACHE2>
  900.   PerlHandler Apache::PerlRun
  901. </IfDefine>
  902. <IfDefine APACHE2>
  903.   PerlResponseHandler ModPerl::PerlRun
  904. </IfDefine>
  905. Options -Indexes ExecCGI
  906. PerlSendHeader On
  907.        <IfModule mod_access.c>
  908.          Order allow,deny
  909.          Allow from all
  910.        </IfModule>
  911.     </Directory>
  912. </IfModule>
  914. <Directory /var/www/icons>
  915.     Options -Indexes MultiViews
  916.     AllowOverride None
  917.     <IfModule mod_access.c>
  918.       Order allow,deny
  919.       Allow from all
  920.     </IfModule>
  921. </Directory>
  923. <Directory /usr/share/doc>
  924.     Options Indexes FollowSymLinks
  925.     <IfModule mod_access.c>
  926.       Order deny,allow
  927.       Deny from all
  928.       Allow from 127.0.0.1
  929.       #allow from .your_domain.com
  930.     </IfModule>
  931. </Directory>
  933. <Directory /var/www/html/addon-modules>
  934.     Options Indexes FollowSymLinks
  935. </Directory>
  937. <Location /index.shtml>
  938.     Options +Includes
  939. </Location>
  941. <IfModule mod_perl.c>
  942.     <IfDefine !APACHE2>
  943.       PerlModule Apache::Registry
  944.     </IfDefine>
  945.      
  946.     #set Apache::Registry Mode for /perl Alias
  947.     <Location /perl/*.pl>
  948. SetHandler perl-script
  949. <IfDefine !APACHE2>
  950.   PerlHandler Apache::Registry
  951. </IfDefine>
  952. <IfDefine APACHE2>
  953.   PerlResponseHandler ModPerl::Registry
  954. </IfDefine>
  955. Options -Indexes ExecCGI
  956. PerlSendHeader On
  957.     </Location>
  959.     #set Apache::PerlRun Mode for /cgi-perl Alias
  960.     <Location /cgi-perl/*.pl>
  961. SetHandler perl-script
  962. <IfDefine !APACHE2>
  963.   PerlHandler Apache::PerlRun
  964. </IfDefine>
  965. <IfDefine APACHE2>
  966.   PerlResponseHandler ModPerl::PerlRun
  967. </IfDefine>
  968. Options -Indexes ExecCGI
  969. PerlSendHeader On
  970.     </Location>
  971. </IfModule>


 
y a t'il un pb avec mes fichiers????
 
si qqun me trouve la solution, je  lui en serai vraiment redevable!!!!!!
 
 
merci a tous!!!!!!!!


---------------
"afin de prolonger tes jours sur cette terre que l'eternel ton D-ieu te donne."
mood
Publicité
Posté le 24-11-2005 à 13:13:07  profilanswer
 

n°755564
mikala
Souviens toi du 5 Novembre...
Posté le 24-11-2005 à 13:16:30  profilanswer
 

est il possible de sortir du réseau a partir de la machine sous laquelle tourne ton serveur apache ?
(note je doute que la configuration de ton serveur apache soit en cause , c'est la configuration de ton réseau qui est a revoir a mon avis.)

n°755576
memaster
ki a volé mon 62?
Posté le 24-11-2005 à 13:48:02  profilanswer
 

un p'ti ifconfig et route seraient les bienvenus
ainsi que netstat histoire de verifier sur quoi ecoute ton httpd.
verifie aussi la config dns ==> /etc/resolv.conf et l'ip de ta gateway (passerelle).

n°755579
l0ky
Posté le 24-11-2005 à 13:51:56  profilanswer
 

netstat -laptn pour vérifier que httpd écoute sur le bon port et sur les bonnes interfaces
iptables -L -n -v pour vérifier que netfilter ne bloque rien sur le serveur
revérifier le NAT sur le routeur
revérifier l'ouverture du port 80 depuis internet vers ton serveur sur le routeur/firewall
vérifier les routes sur le serveur


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs
  réseaux et sécurité

  serveur apache qui refuse toute connec de l'exterieur

 

Sujets relatifs
Apache : bloquer l'accès par adresse IPServeur qui rame au bout de quelques heures
lien symbolique dans un serveur ftpdebian : je peux pas lancer le serveur X
[Serveur VSFTP] VSFTP + SSL - HelpServeur virtuel et distribution
Pb ApacheServeur de License pour Cluster
Script php sur la charge du serveurInstallion Mandriva Apache
Plus de sujets relatifs à : serveur apache qui refuse toute connec de l'exterieur

Forum MesDiscussions.Net, Version 2010.2
(c) 2000-2011 Doctissimo
Page générée en 0.167 secondes

Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR