Forum |  HardWare.fr | News | Articles | PC | S'identifier | S'inscrire | Shop Recherche
1415 connectés 

  FORUM HardWare.fr
  Linux et OS Alternatifs

  [cups] problème impression HP1315

 
 


 Mot :   Pseudo :  
 
Bas de page
Auteur Sujet :

[cups] problème impression HP1315

n°708244
coolben
http://www.starbusiness.fr
Posté le 19-07-2005 à 09:56:10  profilanswer
 

salut a tous
 
J'ai une imprimante multifonction HP1315 et j'aimerai pouvoir l'utiliser sous linux.
J'ai installé cups mais lorsque que je me connecte en root et que je demande de lancer un page de test, rien ne se produit.
 
J'ai regardé dans les log de cups et il n'y a pas d'erreur.
 
Lors de l'installation de l'imprimante j'ai du choisir un des " driver HP mais je ne sais pas si c'est le bon
comment faire pour savoir lequel est le bon ?
Y a t il d'autre log a vérifer ?
 
merci pour votre aide
 

mood
Publicité
Posté le 19-07-2005 à 09:56:10  profilanswer
 

n°708687
coolben
http://www.starbusiness.fr
Posté le 19-07-2005 à 22:36:11  profilanswer
 

pour ceux que ca interresse et qui ont besoin d'installer cette imprimante ce lien pourra peut etre vous aider :
http://jeanyves.bossard.free.fr/In [...] ebian.html
il explique comment installer une imprimante multifonction pcs1315
malgres tous j'ai suivi les instructions et cela ne marche toujours pas chez moi.
 
je ne comprend pas quel est le problème tous semble marcher sauf que rien ne sort.
 
merci au trois personnes qui ont consultés le post avant ce message
 :hello:

n°708689
rougeole
Posté le 19-07-2005 à 22:39:54  profilanswer
 

As-tu essayé de te connecter à cups en local (localhost:631) pour voir si ton imprimante est bien installée et disponible ?


Message édité par rougeole le 19-07-2005 à 22:42:55
n°708693
jlighty
Posté le 19-07-2005 à 22:41:44  profilanswer
 

Dans la page administration de CUPS quel est l'état de l'imprimante ?

n°708701
coolben
http://www.starbusiness.fr
Posté le 19-07-2005 à 22:52:03  profilanswer
 

voici ce que j'ai dans la section imprimante de l'interface web de cups :
 

Citation :

Description:
Emplacement: /etc/cups/ppd
Etat de l'imprimante: fonctionne, accepte les travaux.
URI de périphérique: ptal:/mlc:usb:psc_1310_series_


 
par contre je trouve bizare que lorsque j'essayer d'annuler un travail de l'utilisateur root en tant qu'utilisateur normal dans la partie configuration de gnome, celle ci plante.

n°708704
Profil sup​primé
Posté le 19-07-2005 à 22:53:43  answer
 

ok... resolu il y a 3 jours...
 
http://forum.hardware.fr/forum2.ph [...] ash_post=0
 
autrement... je remet la procedure ici :

Citation :


Donc sous debian, pour installer une HP color laserjet 1500,
 
Il ne faut pas utiliser le paquet debian mais aller chercher sur  
http://foo2oak.rkkda.com/
 
la dernière version du driver... avoir cups installé... et compiler le logiciel du site...
 

Code :
  1. wget http://foo2zjs.rkkda.com/foo2zjs.tar.gz
  2. tar zxf foo2zjs.tar.gz && cd foo2zjs
  3. make
  4. make install




 
Mais verifie tout d'abord la presence de "oakdecode" sur ta machine...

n°708705
jlighty
Posté le 19-07-2005 à 22:54:01  profilanswer
 

As tu mis le log en mode debug (LogLevel) ?

n°708712
coolben
http://www.starbusiness.fr
Posté le 19-07-2005 à 23:02:47  profilanswer
 

Citation :

As tu mis le log en mode debug (LogLevel) ?


je l'ai mis a debug mais la taille de mes log a considerable augmenter.
j'ai 3 lignes qui s'ajoutent toutes les 2 secondes juste pour dire qu'il attend sur le prot http.
de plus lorsque je lance une impression j'ai pas plus de message d'erreur mais beaucoup de ligne en plus que je ne comprend pas.
j'ai l'impression qu'il m'indique tout les points à imprimer.
 
bref je veux bien remettre loglevel a detail mais je ne suis pas sur que cela m'aidera beaucoup.
 
 

Citation :


  ok... resolu il y a 3 jours...
 
http://forum.hardware.fr/forum2.ph [...] ash_post=0
 
autrement... je remet la procedure ici :
Citation :
 
 
Donc sous debian, pour installer une HP color laserjet 1500,
 
Il ne faut pas utiliser le paquet debian mais aller chercher sur  
http://foo2oak.rkkda.com/
 
la dernière version du driver... avoir cups installé... et compiler le logiciel du site...
 
Code :
 
    * wget http://foo2zjs.rkkda.com/foo2zjs.tar.gz
    * tar zxf foo2zjs.tar.gz && cd foo2zjs
    * make
    * make install
 
 
 
 
Mais verifie tout d'abord la presence de "oakdecode" sur ta machine...


 
j'avais deja essayé et cela ne marche pas.
le drivers est pour des autres types d'imprimantes qui sont différents de la mienne.

n°708716
Profil sup​primé
Posté le 19-07-2005 à 23:08:10  answer
 

bon... tant pis... je vais regarder un peu plus attentivement...

n°708719
jlighty
Posté le 19-07-2005 à 23:10:39  profilanswer
 

Essaye quand même de mettre les logs en lignes qu'on jette un coup d'oeil dessus.

mood
Publicité
Posté le 19-07-2005 à 23:10:39  profilanswer
 

n°708727
coolben
http://www.starbusiness.fr
Posté le 19-07-2005 à 23:19:21  profilanswer
 

voici mon fichier de log :
attention le debut contient la partie avec un logLevel  a info puis j'ai mi a debug et j'ai redemaré le service par la command:  
/etc/ini.d/cups restart
 
 

Citation :

I [19/Jul/2005:23:14:42 +0200] Scheduler shutting down normally.
I [19/Jul/2005:23:14:42 +0200] Listening to 0:631
D [19/Jul/2005:23:14:42 +0200] AddLocation: added location '/'
D [19/Jul/2005:23:14:42 +0200] DenyIP: / deny 00000000/00000000
D [19/Jul/2005:23:14:42 +0200] AllowIP: / allow 7f000001/ffffffff
D [19/Jul/2005:23:14:42 +0200] AddLocation: added location '/jobs'
D [19/Jul/2005:23:14:42 +0200] AddLocation: added location '/admin'
D [19/Jul/2005:23:14:42 +0200] DenyIP: /admin deny 00000000/00000000
D [19/Jul/2005:23:14:42 +0200] AllowIP: /admin allow 7f000001/ffffffff
I [19/Jul/2005:23:14:42 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [19/Jul/2005:23:14:42 +0200] Configured for up to 100 clients.
I [19/Jul/2005:23:14:42 +0200] Allowing up to 100 client connections per host.
I [19/Jul/2005:23:14:42 +0200] Full reload is required.
D [19/Jul/2005:23:14:42 +0200] LoadAllPrinters: Loading printer hp_pcs1315...
D [19/Jul/2005:23:14:42 +0200] LoadAllClasses: Loading class hp...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "ipp"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "http"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "lpd"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "parallel:/dev/lp0"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "socket"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb://hp/psc%201310%20series%20?serial=CN522C3022O2"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp8"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp9"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp10"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp11"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp12"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp13"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp14"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "usb:/dev/usb/lp15"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "ptal"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "epson:/dev/lp0"...
D [19/Jul/2005:23:14:42 +0200] LoadDevices: Added device "canon:/dev/lp0"...
I [19/Jul/2005:23:14:42 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 575 PPDs...
I [19/Jul/2005:23:14:42 +0200] LoadPPDs: No new or changed PPDs...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Scanning /var/spool/cups...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 1...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 2...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 3...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 4...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 5...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 6...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 7...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 8...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 9...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 10...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 11...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 13...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 15...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 14...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 17...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 16...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 19...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 18...
D [19/Jul/2005:23:14:42 +0200] LoadAllJobs: Loading attributes for job 20...
I [19/Jul/2005:23:14:42 +0200] Full reload complete.
D [19/Jul/2005:23:14:42 +0200] StartListening: NumListeners=1
D [19/Jul/2005:23:14:42 +0200] StartListening: address=00000000 port=631
D [19/Jul/2005:23:14:42 +0200] ResumeListening: setting input bits...
D [19/Jul/2005:23:14:44 +0200] AcceptClient: 5 from localhost:631.
D [19/Jul/2005:23:14:44 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:44 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:14:44 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:44 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:14:44 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:44 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:14:44 +0200] CloseClient: 5
D [19/Jul/2005:23:14:44 +0200] AcceptClient: 5 from localhost:631.
D [19/Jul/2005:23:14:44 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:44 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:14:44 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:44 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:14:49 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:14:49 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:49 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:14:49 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:49 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:14:49 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:49 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:14:49 +0200] CloseClient: 7
D [19/Jul/2005:23:14:49 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:49 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:14:49 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:49 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:14:54 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:14:54 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:14:54 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:14:54 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:14:54 +0200] CloseClient: 7
D [19/Jul/2005:23:14:54 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:14:54 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:14:54 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:14:54 +0200] ReadClient: 7 GET /jobs HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] CGI /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 5146
I [19/Jul/2005:23:14:54 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=5146)
D [19/Jul/2005:23:14:54 +0200] SendCommand: 7 file=9
D [19/Jul/2005:23:14:54 +0200] AcceptClient: 8 from localhost:631.
D [19/Jul/2005:23:14:54 +0200] ReadClient: 8 POST / HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] ProcessIPPRequest: 8 status_code=1
D [19/Jul/2005:23:14:54 +0200] CloseClient: 8
D [19/Jul/2005:23:14:54 +0200] ReadClient: 7 GET /favicon.ico HTTP/1.1
D [19/Jul/2005:23:14:54 +0200] SendError: 7 code=404 (Not Found)
D [19/Jul/2005:23:14:54 +0200] CloseClient: 7
D [19/Jul/2005:23:14:57 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:14:57 +0200] ReadClient: 7 GET /printers HTTP/1.1
D [19/Jul/2005:23:14:57 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 5148
I [19/Jul/2005:23:14:57 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5148)
D [19/Jul/2005:23:14:57 +0200] SendCommand: 7 file=9
D [19/Jul/2005:23:14:57 +0200] AcceptClient: 8 from localhost:631.
D [19/Jul/2005:23:14:57 +0200] ReadClient: 8 POST / HTTP/1.1
D [19/Jul/2005:23:14:57 +0200] ProcessIPPRequest: 8 status_code=1
D [19/Jul/2005:23:14:57 +0200] ReadClient: 8 POST / HTTP/1.1
D [19/Jul/2005:23:14:57 +0200] ProcessIPPRequest: 8 status_code=1
D [19/Jul/2005:23:14:57 +0200] CloseClient: 8
D [19/Jul/2005:23:14:57 +0200] ReadClient: 7 GET /favicon.ico HTTP/1.1
D [19/Jul/2005:23:14:57 +0200] SendError: 7 code=404 (Not Found)
D [19/Jul/2005:23:14:57 +0200] CloseClient: 7
D [19/Jul/2005:23:14:58 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:14:58 +0200] ReadClient: 7 GET /printers/hp_pcs1315?op=print-test-page HTTP/1.1
D [19/Jul/2005:23:14:58 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 5149
I [19/Jul/2005:23:14:58 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5149)
D [19/Jul/2005:23:14:58 +0200] SendCommand: 7 file=9
D [19/Jul/2005:23:14:58 +0200] AcceptClient: 8 from localhost:631.
D [19/Jul/2005:23:14:58 +0200] ReadClient: 8 POST /printers/hp_pcs1315 HTTP/1.1
D [19/Jul/2005:23:14:58 +0200] print_job: request file type is application/postscript.
D [19/Jul/2005:23:14:58 +0200] check_quotas: requesting-user-name = 'root'
D [19/Jul/2005:23:14:58 +0200] print_job: requesting-user-name = 'root'
D [19/Jul/2005:23:14:58 +0200] Adding default job-sheets values "none,none"...
I [19/Jul/2005:23:14:58 +0200] Adding start banner page "none" to job 21.
I [19/Jul/2005:23:14:58 +0200] Adding end banner page "none" to job 21.
I [19/Jul/2005:23:14:58 +0200] Job 21 queued on 'hp_pcs1315' by 'root'.
D [19/Jul/2005:23:14:58 +0200] Job 21 hold_until = 0
D [19/Jul/2005:23:14:58 +0200] StartJob(21, 0x80b8be8)
D [19/Jul/2005:23:14:58 +0200] StartJob() id = 21, file = 0/1
D [19/Jul/2005:23:14:58 +0200] job-sheets=none,none
D [19/Jul/2005:23:14:58 +0200] banner_page = 0
D [19/Jul/2005:23:14:58 +0200] StartJob: argv = "hp_pcs1315","21","root","Test Page","1","","/var/spool/cups/d00021-001"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[2]="USER=root"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[3]="CHARSET=iso-8859-15"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[4]="LANG=fr"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[5]="TZ=Europe/Paris"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[6]="PPD=/etc/cups/ppd/hp_pcs1315.ppd"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[8]="RIP_MAX_CACHE=8m"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[11]="DEVICE_URI=ptal:/mlc:usb:psc_1310_series_"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[12]="PRINTER=hp_pcs1315"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[15]="CUPS_SERVER=localhost"
D [19/Jul/2005:23:14:58 +0200] StartJob: envp[16]="IPP_PORT=631"
D [19/Jul/2005:23:14:58 +0200] StartJob: statusfds = [ 10 11 ]
D [19/Jul/2005:23:14:58 +0200] StartJob: filterfds[1] = [ 12 -1 ]
D [19/Jul/2005:23:14:58 +0200] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [19/Jul/2005:23:14:58 +0200] StartJob: filterfds[0] = [ 13 14 ]
D [19/Jul/2005:23:14:58 +0200] start_process("/usr/lib/cups/filter/pstops", 0xbffefd10, 0xbffef080, 12, 14, 11)
I [19/Jul/2005:23:14:58 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5150) for job 21.
D [19/Jul/2005:23:14:58 +0200] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [19/Jul/2005:23:14:58 +0200] StartJob: filterfds[1] = [ 12 15 ]
D [19/Jul/2005:23:14:58 +0200] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffefd10, 0xbffef080, 13, 15, 11)
I [19/Jul/2005:23:14:58 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 5151) for job 21.
D [19/Jul/2005:23:14:58 +0200] StartJob: backend = "/usr/lib/cups/backend/ptal"
D [19/Jul/2005:23:14:58 +0200] StartJob: filterfds[0] = [ -1 13 ]
D [19/Jul/2005:23:14:58 +0200] start_process("/usr/lib/cups/backend/ptal", 0xbffefd10, 0xbffef080, 12, 13, 11)
I [19/Jul/2005:23:14:58 +0200] Started backend /usr/lib/cups/backend/ptal (PID 5152) for job 21.
D [19/Jul/2005:23:14:58 +0200] ProcessIPPRequest: 8 status_code=0
D [19/Jul/2005:23:14:58 +0200] [Job 21] Page = 595x842; 10,36 to 585,833
D [19/Jul/2005:23:14:58 +0200] [Job 21] slowcollate=0, slowduplex=0, sloworder=0
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%BoundingBox: 0 0 612 792
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%Pages: 1
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%LanguageLevel: 1
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%DocumentData: Clean7Bit
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%Creator: Michael Sweet, Easy Software Products
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%CreationDate: May 11, 1999
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%Title: Test Page
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%EndComments
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%BeginProlog
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%BeginResource procset testprint 1.1 0
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%EndResource
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%EndProlog
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%Page: 1 1
D [19/Jul/2005:23:14:58 +0200] [Job 21] 0 %%Page: 1 1
D [19/Jul/2005:23:14:58 +0200] [Job 21] pw = 575.6, pl = 797.0
D [19/Jul/2005:23:14:58 +0200] [Job 21] PageLeft = 9.7, PageRight = 585.3
D [19/Jul/2005:23:14:58 +0200] [Job 21] PageTop = 833.0, PageBottom = 36.0
D [19/Jul/2005:23:14:58 +0200] [Job 21] PageWidth = 595.0, PageLength = 842.0
D [19/Jul/2005:23:14:58 +0200] [Job 21] perl: warning: Setting locale failed.
D [19/Jul/2005:23:14:58 +0200] [Job 21] perl: warning: Please check that your locale settings:
D [19/Jul/2005:23:14:58 +0200] [Job 21] LANGUAGE = (unset),
D [19/Jul/2005:23:14:58 +0200] [Job 21] LC_ALL = (unset),
D [19/Jul/2005:23:14:58 +0200] [Job 21] LANG = "fr"
D [19/Jul/2005:23:14:58 +0200] [Job 21] are supported and installed on your system.
D [19/Jul/2005:23:14:58 +0200] [Job 21] perl: warning: Falling back to the standard locale ("C" ).
D [19/Jul/2005:23:14:59 +0200] CloseClient: 8
D [19/Jul/2005:23:14:59 +0200] ReadClient: 7 GET /favicon.ico HTTP/1.1
D [19/Jul/2005:23:14:59 +0200] SendError: 7 code=404 (Not Found)
D [19/Jul/2005:23:14:59 +0200] CloseClient: 7
D [19/Jul/2005:23:14:59 +0200] [Job 21] foomatic-rip version $Revision: 3.48 $ running...
D [19/Jul/2005:23:14:59 +0200] [Job 21] Parsing PPD file ...
D [19/Jul/2005:23:14:59 +0200] [Job 21] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option ColorSpace
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option Resolution
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option PageSize
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option PageRegion
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option Model
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option PrintoutMode
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option ImageableArea
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option PaperDimension
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option Quality
D [19/Jul/2005:23:14:59 +0200] [Job 21] Added option Font
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] Parameter Summary
D [19/Jul/2005:23:14:59 +0200] [Job 21] -----------------
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] Spooler: cups
D [19/Jul/2005:23:14:59 +0200] [Job 21] Printer: hp_pcs1315
D [19/Jul/2005:23:14:59 +0200] [Job 21] PPD file: /etc/cups/ppd/hp_pcs1315.ppd
D [19/Jul/2005:23:14:59 +0200] [Job 21] Printer model: HP PSC 1310 Foomatic/hpijs (recommended)
D [19/Jul/2005:23:14:59 +0200] [Job 21] Job title: Test Page
D [19/Jul/2005:23:14:59 +0200] [Job 21] File(s) to be printed:  
D [19/Jul/2005:23:14:59 +0200] [Job 21] <STDIN>
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] ================================================
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] File: <STDIN>
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] ================================================
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] Reading PostScript input ...
D [19/Jul/2005:23:14:59 +0200] [Job 21] --> This document is DSC-conforming!
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] -----------
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%BeginProlog
D [19/Jul/2005:23:14:59 +0200] [Job 21] 0 %%EOF
D [19/Jul/2005:23:14:59 +0200] [Job 21] Saw EOF!
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%EndProlog
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] -----------
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%BeginSetup
D [19/Jul/2005:23:14:59 +0200] [Job 21] Inserting PostScript code for CUPS' page accounting
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%BeginFeature: *PrintoutMode Normal
D [19/Jul/2005:23:14:59 +0200] [Job 21] Option: PrintoutMode=Normal --> Setting option
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [19/Jul/2005:23:14:59 +0200] [Job 21] Option: PrintoutMode=Normal --> Setting option
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%BeginFeature: *Quality FromPrintoutMode
D [19/Jul/2005:23:14:59 +0200] [Job 21] Option: Quality=FromPrintoutMode --> Setting option
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [19/Jul/2005:23:14:59 +0200] [Job 21] Option: Quality=FromPrintoutMode --> Setting option
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%BeginFeature: *PageSize A4
D [19/Jul/2005:23:14:59 +0200] [Job 21] Option: PageSize=A4 --> Setting option
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %% FoomaticRIPOptionSetting: PageSize=A4
D [19/Jul/2005:23:14:59 +0200] [Job 21] Option: PageSize=A4 --> Setting option
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found: %%EndSetup
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] -----------
D [19/Jul/2005:23:14:59 +0200] [Job 21] New page:  1 1
D [19/Jul/2005:23:14:59 +0200] [Job 21] Inserting option code into "PageSetup" section.
D [19/Jul/2005:23:14:59 +0200] [Job 21] No page header or page header not DSC-conforming
D [19/Jul/2005:23:14:59 +0200] [Job 21] Stopping search for page header options
D [19/Jul/2005:23:14:59 +0200] [Job 21] Found:
D [19/Jul/2005:23:14:59 +0200] [Job 21] pageHeight sub   % Move down...
D [19/Jul/2005:23:14:59 +0200] [Job 21] --> Output goes directly to the renderer now.
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] Starting renderer
D [19/Jul/2005:23:14:59 +0200] [Job 21] JCL: <job data>  
D [19/Jul/2005:23:14:59 +0200] [Job 21]  
D [19/Jul/2005:23:14:59 +0200] [Job 21] renderer PID kid4=5155
D [19/Jul/2005:23:14:59 +0200] [Job 21] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3600" -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
D [19/Jul/2005:23:14:59 +0200] [Job 21] perl: warning: Setting locale failed.
D [19/Jul/2005:23:14:59 +0200] [Job 21] perl: warning: Please check that your locale settings:
D [19/Jul/2005:23:14:59 +0200] [Job 21] LANGUAGE = (unset),
D [19/Jul/2005:23:14:59 +0200] [Job 21] LC_ALL = (unset),
D [19/Jul/2005:23:14:59 +0200] [Job 21] LANG = "fr"
D [19/Jul/2005:23:14:59 +0200] [Job 21] are supported and installed on your system.
D [19/Jul/2005:23:14:59 +0200] [Job 21] perl: warning: Falling back to the standard locale ("C" ).
D [19/Jul/2005:23:14:59 +0200] [Job 21] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 3600' '-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
D [19/Jul/2005:23:14:59 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:14:59 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:59 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:14:59 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:59 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:14:59 +0200] [Job 21] ptal-connect: connecting to device "mlc:usb:psc_1310_series_"...  
D [19/Jul/2005:23:14:59 +0200] [Job 21] Closing renderer
D [19/Jul/2005:23:14:59 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:14:59 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:14:59 +0200] CloseClient: 7
D [19/Jul/2005:23:14:59 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:59 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:14:59 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:14:59 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:15:00 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:15:00 +0200] ReadClient: 7 GET /printers/hp_pcs1315 HTTP/1.1
D [19/Jul/2005:23:15:00 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 5162
I [19/Jul/2005:23:15:00 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5162)
D [19/Jul/2005:23:15:00 +0200] SendCommand: 7 file=9
D [19/Jul/2005:23:15:00 +0200] AcceptClient: 8 from localhost:631.
D [19/Jul/2005:23:15:00 +0200] ReadClient: 8 POST / HTTP/1.1
D [19/Jul/2005:23:15:00 +0200] ProcessIPPRequest: 8 status_code=1
D [19/Jul/2005:23:15:01 +0200] ReadClient: 8 POST / HTTP/1.1
D [19/Jul/2005:23:15:01 +0200] ProcessIPPRequest: 8 status_code=1
D [19/Jul/2005:23:15:01 +0200] ReadClient: 8 POST / HTTP/1.1
D [19/Jul/2005:23:15:01 +0200] ProcessIPPRequest: 8 status_code=1
D [19/Jul/2005:23:15:01 +0200] CloseClient: 8
D [19/Jul/2005:23:15:01 +0200] ReadClient: 7 GET /favicon.ico HTTP/1.1
D [19/Jul/2005:23:15:01 +0200] SendError: 7 code=404 (Not Found)
D [19/Jul/2005:23:15:01 +0200] CloseClient: 7
D [19/Jul/2005:23:15:04 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:15:04 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:04 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:04 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:04 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:04 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:04 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:15:04 +0200] CloseClient: 7
D [19/Jul/2005:23:15:04 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:04 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:15:04 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:04 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:15:09 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:15:09 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:09 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:09 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:09 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:09 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:09 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:15:09 +0200] CloseClient: 7
D [19/Jul/2005:23:15:09 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:09 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:15:09 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:09 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:15:14 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:15:14 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:14 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:14 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:14 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:14 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:14 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:15:14 +0200] CloseClient: 7
D [19/Jul/2005:23:15:14 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:14 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:15:14 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:14 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:15:19 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:15:19 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:19 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:19 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:19 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:19 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:19 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:15:19 +0200] CloseClient: 7
D [19/Jul/2005:23:15:19 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:19 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:15:19 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:19 +0200] ProcessIPPRequest: 5 status_code=1
D [19/Jul/2005:23:15:24 +0200] AcceptClient: 7 from localhost:631.
D [19/Jul/2005:23:15:24 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:24 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:24 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:24 +0200] ProcessIPPRequest: 7 status_code=1
D [19/Jul/2005:23:15:24 +0200] ReadClient: 7 POST / HTTP/1.1
D [19/Jul/2005:23:15:24 +0200] ProcessIPPRequest: 7 status_code=0
D [19/Jul/2005:23:15:24 +0200] CloseClient: 7
D [19/Jul/2005:23:15:24 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:24 +0200] ProcessIPPRequest: 5 status_code=0
D [19/Jul/2005:23:15:24 +0200] ReadClient: 5 POST / HTTP/1.1
D [19/Jul/2005:23:15:24 +0200] ProcessIPPRequest: 5 status_code=1

n°708980
coolben
http://www.starbusiness.fr
Posté le 20-07-2005 à 14:45:22  profilanswer
 

lorsque j'utilise l'interface de gnome pour la gestion des imprimante et que j'essaye d'annuler une impression (lancée par cette interface), cette interface plante. Quand je dit plante c'est que tout l'interface ne repond plus et que si je masque un fenetre, je ne vois plus linterface mais juste le contoure.
 
Cela est peut etre lié a mon problème ?

n°708981
jlighty
Posté le 20-07-2005 à 14:47:03  profilanswer
 

je ne pense, il m'est arrivé la même chose pourtant en passant avec l'interface Web ça marchait.

n°708985
coolben
http://www.starbusiness.fr
Posté le 20-07-2005 à 14:54:27  profilanswer
 

que doit ton mettre dans le champs emplacement ?
moi j'ai mis le repertoire ou il y avait les fichiers .ppd (driver)
 
par contre je trouve bizare que ces fichier soit la propriété de 501 et du groupe 501.

n°708988
jlighty
Posté le 20-07-2005 à 14:55:29  profilanswer
 

emplacement ? (location en anglais ?)
c'est juste un commentaire par ex:
salle info, grenier...


Message édité par jlighty le 20-07-2005 à 14:55:36
n°709001
coolben
http://www.starbusiness.fr
Posté le 20-07-2005 à 15:44:51  profilanswer
 

Ouf j'ai enfin resolu mon problème
 
j'ai supprimé l'imprimante avec l'interface web, j'ai redémaré et j'ai ajouter l'imprimante avec l'interface de gnome.
J'arrive maintenant a imprimer de page de test et des documents openoffice.
 
par contre je ne sais pas comment imprimer un page web et comment configurer mon deuxiemme pc pour qu'il puisse imprimer en utilisant le reseau
mais bon je suis content j'ai finalement reussi à avancer un tout petit peu
 

n°709002
jlighty
Posté le 20-07-2005 à 15:46:14  profilanswer
 

si ton PC est sous linux, configure ton imprimante comme client à un serveur CUPS.
Si c'est sous Windows -> Samba

n°709010
coolben
http://www.starbusiness.fr
Posté le 20-07-2005 à 16:01:46  profilanswer
 

oui mes deux pc sont soux linux debian

n°709014
jlighty
Posté le 20-07-2005 à 16:05:06  profilanswer
 

par contre va falloir configurer correctement le client CUPS pour qu'il se connecte au serveur CUPS

n°723058
coolben
http://www.starbusiness.fr
Posté le 30-08-2005 à 16:07:56  profilanswer
 

Me revoila à essayer de configurer mon imprimante sur mon deuxieme pc (debian etch)
Je viens de la brancher phisiquement et lorque je tape lsusb je trouve bien mon imprimante.
Par contre des que je lance l'interface de gnome pour l'ajouter, mon imprimante n'est pas trouvé !
Je ne comprend pas pourquoi ?
Es ce un probleme de drivers ?
Si oui comment peut on savoir si un driver est deja installé ?
Sinon, d'ou peut venir le problème ?  
 
merci


Aller à :
Ajouter une réponse
  FORUM HardWare.fr
  Linux et OS Alternatifs

  [cups] problème impression HP1315

 

Sujets relatifs
probleme avec vncThundermail ou mozilla, probleme de piece jointe
[debian] Problème avec une partition au démarrageDistrib mini serveur fichier+impression
probleme divx avec mencoder (pré7)Problème clef WEP
2 canaux (droite et gauche) vers 1 canal central ... asoundrc probleme[RAID logiciel]probleme avec mdadm -a
[gentoo] et probleme de ping[Debian] Petit probleme d'install avec GRUB etc
Plus de sujets relatifs à : [cups] problème impression HP1315

Forum MesDiscussions.Net, Version 2010.2
(c) 2000-2011 Doctissimo
Page générée en 0.063 secondes

Copyright © 1997-2022 Hardware.fr SARL (Signaler un contenu illicite / Données personnelles) / Groupe LDLC / Shop HFR