k666 dites non à petitmou | encore salut
voila hier j'ai mis le nouveau kernel 2.4.22, j'ai été obligé car impossible de compiler les séries patchées des 2.4.20 alors que ca marchait avant (je pense que c gcc qui a fouttu sa merde)
enfin bon du coup avec le nouveau kernel tout se passe bien mais ca ne me détecte pas un de mes hdd je sais vraiment pas pourquoi, avant il était en tant que /dev/hde et la plus rien
je vous file ci dessous mon dmesg, si vous avez une idée ce serait cool !
Code :
- kpoman root # dmesg
- les : ACPI Tables successfully acquired
- Parsing all Control Methods:....................................................
- ...............................................................
- Table [DSDT](id F004) - 356 Objects with 38 Devices 115 Methods 24 Regions
- ACPI Namespace successfully loaded at root c040fd9c
- evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
- evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000
- 00000E420 on int 9
- Completing Region/Field/Buffer/Package initialization:..........................
- .................................
- Initialized 24/24 Regions 2/2 Fields 19/19 Buffers 14/14 Packages (364 nodes)
- Executing all Device _STA and_INI methods:......................................
- .
- 39 Devices found containing: 39 _STA, 0 _INI methods
- ACPI: Interpreter enabled
- ACPI: Using PIC for interrupt routing
- ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
- ACPI: PCI Root Bridge [PCI0] (00:00)
- PCI: Probing PCI hardware (bus 00)
- Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- PCI: Probing PCI hardware
- ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
- ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
- ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
- ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
- PCI: Using ACPI for IRQ routing
- PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off
- '
- Applying VIA southbridge workaround.
- PCI: Via IRQ fixup for 00:04.2, from 3 to 9
- PCI: Via IRQ fixup for 00:04.3, from 3 to 9
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- Initializing RT netlink socket
- apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
- apm: overridden by ACPI.
- Starting kswapd
- devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: devfs_debug: 0x0
- devfs: boot_options: 0x1
- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- NTFS driver v1.1.22 [Flags: R/O]
- pty: 256 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI IS
- APNP enabled
- Floppy drive(s): fd0 is 1.44M
- FDC 0 is a post-1991 82077
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
- Linux agpgart interface v0.99 (c) Jeff Hartmann
- agpgart: Maximum main memory to use for agp memory: 752M
- agpgart: Detected Via Apollo Pro KT133 chipset
- agpgart: AGP aperture is 64M @ 0xe4000000
- [drm] Initialized tdfx 1.0.0 20010216 on minor 0
- [drm] AGP 0.99 on VIA Apollo KT133 @ 0xe4000000 64MB
- [drm] Initialized radeon 1.1.1 20010405 on minor 1
- Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- VP_IDE: IDE controller at PCI slot 00:04.1
- VP_IDE: chipset revision 6
- VP_IDE: not 100% native mode: will probe irqs later
- VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
- ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
- ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
- hda: Maxtor 6Y060L0, ATA DISK drive
- hdb: LITE-ON LTR-48246K, ATAPI CD/DVD-ROM drive
- blk: queue c04279a0, I/O limit 4095Mb (mask 0xffffffff)
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- hda: attached ide-disk driver.
- hda: host protected area => 1
- hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63, UDMA(100)
- hdb: attached ide-scsi driver.
- Partition check:
- /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
- SCSI subsystem driver Revision: 1.00
- scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
- <Adaptec 29160 Ultra160 SCSI adapter>
- aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
- (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
- Vendor: COMPAQ Model: BD0366459B Rev: B005
- Type: Direct-Access ANSI SCSI revision: 02
- scsi0:A:4:0: Tagged Queuing enabled. Depth 253
- scsi1 : SCSI host adapter emulation for IDE ATAPI devices
- Vendor: LITE-ON Model: LTR-48246K Rev: SKS7
- Type: CD-ROM ANSI SCSI revision: 02
- Attached scsi disk sda at scsi0, channel 0, id 4, lun 0
- SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB)
- /dev/scsi/host0/bus0/target4/lun0: p1 p2 p3 p4
- Linux Kernel Card Services 3.1.22
- options: [pci] [cardbus] [pm]
- Intel PCIC probe: not found.
- Databook TCIC-2 PCMCIA probe: not found.
- usb.c: registered new driver usbdevfs
- usb.c: registered new driver hub
- host/uhci.c: USB Universal Host Controller Interface driver v1.1
- host/uhci.c: USB UHCI at I/O 0xd400, IRQ 9
- usb.c: new USB bus registered, assigned bus number 1
- host/uhci.c: detected 2 ports
- usb.c: kmalloc IF f3c6e340, numif 1
- usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
- usb.c: USB device number 1 default language ID 0x0
- Product: USB UHCI-alt Root Hub
- SerialNumber: d400
- hub.c: USB hub found
- hub.c: 2 ports detected
- hub.c: standalone hub
- hub.c: ganged power switching
- hub.c: global over-current protection
- hub.c: Port indicators are not supported
- hub.c: power on to power good time: 2ms
- hub.c: hub controller current requirement: 0mA
- hub.c: port removable status: RR
- hub.c: local power source is good
- hub.c: no over-current condition exists
- hub.c: enabling power on all ports
- usb.c: hub driver claimed interface f3c6e340
- usb.c: kusbd: /sbin/hotplug add 1
- usb.c: kusbd policy returned 0xfffffffe
- host/uhci.c: USB UHCI at I/O 0xd000, IRQ 9
- usb.c: new USB bus registered, assigned bus number 2
- host/uhci.c: detected 2 ports
- usb.c: kmalloc IF f3c6e540, numif 1
- usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
- usb.c: USB device number 1 default language ID 0x0
- Product: USB UHCI-alt Root Hub
- SerialNumber: d000
- hub.c: USB hub found
- hub.c: 2 ports detected
- hub.c: standalone hub
- hub.c: ganged power switching
- hub.c: global over-current protection
- hub.c: Port indicators are not supported
- hub.c: power on to power good time: 2ms
- hub.c: hub controller current requirement: 0mA
- hub.c: port removable status: RR
- hub.c: local power source is good
- hub.c: no over-current condition exists
- hub.c: enabling power on all ports
- usb.c: hub driver claimed interface f3c6e540
- usb.c: kusbd: /sbin/hotplug add 1
- usb.c: kusbd policy returned 0xfffffffe
- usb.c: registered new driver usblp
- printer.c: v0.11: USB Printer Device Class driver
- Initializing USB Mass Storage driver...
- usb.c: registered new driver usb-storage
- USB Mass Storage support registered.
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 8192 buckets, 64Kbytes
- TCP: Hash tables configured (established 262144 bind 65536)
- IPv4 over IPv4 tunneling driver
- GRE over IPv4 tunneling driver
- Linux IP multicast router 0.06 plus PIM-SM
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- ds: no socket drivers loaded!
- EXT2-fs warning (device sd(8,3)): ext2_read_super: mounting ext3 filesystem as e
- xt2
- VFS: Mounted root (ext2 filesystem) readonly.
- Mounted devfs on /dev
- Freeing unused kernel memory: 124k freed
- host/uhci.c: root-hub INT complete: port1: 49b port2: 58a data: 6
- hub.c: port 1, portstatus 101, change 3, 12 Mb/s
- hub.c: port 1 connection change
- hub.c: port 1, portstatus 101, change 3, 12 Mb/s
- host/uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
- host/uhci.c: d000: suspend_hc
- hub.c: port 1, portstatus 101, change 2, 12 Mb/s
- hub.c: port 1, portstatus 101, change 2, 12 Mb/s
- host/uhci.c: root-hub INT complete: port1: 499 port2: 58a data: 6
- hub.c: port 1, portstatus 101, change 2, 12 Mb/s
- host/uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
- hub.c: port 1, portstatus 101, change 2, 12 Mb/s
- hub.c: port 1, portstatus 103, change 0, 12 Mb/s
- hub.c: new USB device 00:04.2-1, assigned address 2
- usb.c: kmalloc IF f3c6eac0, numif 1
- usb.c: skipped 1 class/vendor specific interface descriptors
- usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
- usb.c: unhandled interfaces on device
- usb.c: USB device 2 (vend/prod 0x864/0x4102) is not claimed by any active driver
- .
- Length = 18
- DescriptorType = 01
- USB version = 1.10
- Vendor:Product = 0864:4102
- MaxPacketSize0 = 8
- NumConfigurations = 1
- Device version = 1.00
- Device Class:SubClass:Protocol = fe:01:00
- Unknown class
- Configuration:
- bLength = 9
- bDescriptorType = 02
- wTotalLength = 0019
- bNumInterfaces = 01
- bConfigurationValue = 01
- iConfiguration = 00
- bmAttributes = 80
- MaxPower = 500mA
- Interface: 0
- Alternate Setting: 0
- bLength = 9
- bDescriptorType = 04
- bInterfaceNumber = 00
- bAlternateSetting = 00
- bNumEndpoints = 00
- bInterface Class:SubClass:Protocol = fe:01:00
- iInterface = 00
- usb.c: kusbd: /sbin/hotplug add 2
- host/uhci.c: root-hub INT complete: port1: 495 port2: 58a data: 4
- hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
- hub.c: port 2 connection change
- hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
- hub.c: port 1, portstatus 103, change 0, 12 Mb/s
- hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s
- hub.c: port 2 enable change, status 300
- hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
- hub.c: port 1 connection change
- hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
- hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
- hub.c: port 2 connection change
- hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
- host/uhci.c: root-hub INT complete: port1: 588 port2: 588 data: 6
- hub.c: port 1, portstatus 300, change 2, 1.5 Mb/s
- hub.c: port 1 enable change, status 300
- hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s
- hub.c: port 2 enable change, status 300
- Adding Swap: 979956k swap-space (priority -1)
- Creative EMU10K1 PCI Audio Driver, version 0.20, 02:12:01 Sep 18 2003
- emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xa400-0xa41f, IRQ 9
- ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
- emu10k1: SBLive! 5.1 card detected
- i2c-core.o: i2c core module
- i2c-algo-bit.o: i2c bit algorithm module
- Linux video capture interface: v1.00
- bttv: driver version 0.7.107 loaded
- bttv: using 4 buffers with 2080k (8320k total) for capture
- bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
- bttv: Bt8xx card found (0).
- bttv0: Bt848 (rev 18) at 00:0b.0, irq: 10, latency: 64, mmio: 0xd7000000
- bttv0: using: BT848A(MIRO PCTV) [card=1,insmod option]
- i2c-core.o: adapter bt848 #0 registered as adapter 0.
- bttv0: i2c: checking for MSP34xx @ 0x80... not found
- bttv0: miro: id=9 tuner=3 radio=no stereo=no
- bttv0: using tuner=3
- bttv0: i2c: checking for MSP34xx @ 0x80... not found
- bttv0: i2c: checking for TDA9875 @ 0xb0... not found
- bttv0: i2c: checking for TDA7432 @ 0x8a... not found
- tvaudio: TV audio decoder + audio/video mux driver
- tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
- 0,tda8425,pic16c54 (PV951),ta8874z
- i2c-core.o: driver generic i2c audio driver registered.
- i2c-core.o: driver i2c TV tuner driver registered.
- tuner: chip found @ 0xc0
- tuner: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
- i2c-core.o: client [Philips (SECAM+PAL_BG) (FI1216M] registered to adapter [bt84
- 8 #0](pos. 0).
- bttv0: registered device video0
- bttv0: registered device vbi0
- usb.c: registered new driver hiddev
- usb.c: registered new driver hid
- hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
- hid-core.c: USB HID support drivers
- reiserfs: found format "3.6" with standard journal
- reiserfs: checking transaction log (device ide0(3,3)) ...
- for (ide0(3,3))
- ide0(3,3):Using r5 hash to sort names
- Journalled Block Device driver loaded
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,4), internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Real Time Clock Driver v1.10e
- svc: unknown version (3)
- 8139too Fast Ethernet driver 0.9.26
- eth0: RealTek RTL8139 Fast Ethernet at 0x9000, 00:00:e8:7e:ad:e9, IRQ 9
- eth0: Identified 8139 chip type 'RTL-8139A'
- eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
- usb.c: registered new driver usbvnetr
- usb vendor/product=864/4102
- vnet_kernel.c: Reseting Usb Device
- hub.c: port 1, portstatus 103, change 0, 12 Mb/s
- usb.c: ignoring set_interface for dev 2, iface 0, alt 0
- vnet_kernel.c: Reset completed.
- usb.c: kmalloc IF ee618400, numif 1
- usb.c: usbvnetr driver claimed interface ee618400
- Reg Domain
- usbvnetr: driver version 1.0.1, compiled Sep 18 2003 02:45:28 (dbg_mask x0)
- MAC addr 00:09:5B:33:7D:1A firmware 1.101.2.84
- Multicast is enabled
- vnetusba.c: usb eth1 initialized and registered
- usb.c: usbvnetr driver claimed interface ee618400
- **********************
- REASSOCIATION RESPONSE
- **********************
- 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16
- 19:03:09 PDT 2003
- dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
- eth2: Davicom DM9102 at pci00:0c.0, 00:80:ad:7b:5d:e2, irq 11.
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:12036 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:12056 ulen 257
- UDP: bad checksum. From 82.0.92.73:4503 to 192.168.2.3:12212 ulen 257
- UDP: bad checksum. From 81.97.198.31:9940 to 192.168.2.3:13738 ulen 257
- UDP: bad checksum. From 61.59.143.188:4665 to 192.168.2.3:14792 ulen 89
- UDP: bad checksum. From 80.0.36.25:4962 to 192.168.2.3:14818 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:15897 ulen 257
- UDP: bad checksum. From 213.106.206.19:4337 to 192.168.2.3:17357 ulen 257
- UDP: bad checksum. From 61.59.143.188:4665 to 192.168.2.3:17416 ulen 89
- UDP: bad checksum. From 81.97.198.31:9940 to 192.168.2.3:17510 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:17967 ulen 257
- UDP: bad checksum. From 80.1.127.12:10239 to 192.168.2.3:17975 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:18399 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:18907 ulen 257
- UDP: bad checksum. From 81.97.198.31:9940 to 192.168.2.3:19399 ulen 257
- UDP: bad checksum. From 213.106.206.19:4337 to 192.168.2.3:19952 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:19959 ulen 257
- UDP: bad checksum. From 80.1.127.12:10239 to 192.168.2.3:20553 ulen 257
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:21026 ulen 257
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:21532 ulen 257
- UDP: bad checksum. From 213.106.206.19:4337 to 192.168.2.3:21680 ulen 257
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:22049 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:22067 ulen 257
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:23184 ulen 257
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:25562 ulen 257
- UDP: bad checksum. From 80.4.228.2:9305 to 192.168.2.3:26707 ulen 257
- UDP: bad checksum. From 81.103.211.28:10696 to 192.168.2.3:26777 ulen 257
- kpoman root #
|
Message édité par k666 le 18-09-2003 à 21:58:32
|