ichigooo | bonsoir
Mon père vien de me filer une table graphique A3, bon qui est assez ancienne mais qui marche aparement, c'est la summasketch 3 professionnal elle a une sorti en port série.
seulement je n'arrive pas a la faire fonctionner sous mandriva 2010.0, mon père l'a deja testé sous linux il ya quelques années. j'ai donc installé X11-input-summa sans problème, et modifié xorg.conf dans /etc/x11/ afin d' "installer la tablette", mais rien de se passe le curseur de la souris ne bouge pas quand j'utilise la tablette.
voici mon xorg.conf
Code :
- # File generated by XFdrake (rev )
- # nvidia-xconfig: X configuration file generated by nvidia-xconfig
- # nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Aug 14 18:33:37 PDT 2009
- # File generated by XFdrake (rev )
- Section "ServerLayout"
- Identifier "Layout0"
- InputDevice "Keyboard0" "CoreKeyboard"
- InputDevice "SummaSketch III" "SendCoreEvents"
- Screen 0 "Screen0" 0 0
- EndSection
- Section "Files"
- FontPath "/usr/share/fonts/default/Type1"
- EndSection
- Section "InputDevice"
- # generated from data in "/etc/sysconfig/keyboard"
- Identifier "Keyboard0"
- Driver "kbd"
- Option "XkbModel" "pc105"
- Option "XkbLayout" "fr"
- EndSection
- Section "Monitor"
- Identifier "Monitor0"
- VendorName "Unknown"
- ModelName "Unknown"
- HorizSync 28.0 - 33.0
- VertRefresh 43.0 - 72.0
- Option "DPMS"
- EndSection
- Section "Device"
- Identifier "Device0"
- VendorName "NVIDIA Corporation"
- Driver "nvidia"
- EndSection
- Section "Screen"
- Identifier "Screen0"
- Device "Device0"
- Monitor "Monitor0"
- DefaultDepth 24
-
- Subsection "Display"
- Depth 24
- EndSubsection
- EndSection
- Section "Module"
- Load "summa"
- EndSection
- Section "InputDevice"
- Identifier "SummaSketch III"
- Driver "summa"
- Option "Device" "/dev/ttyS0"
- Option "Mode" "Absolute"
- Option "Compatible" "true"
- Option "MaxX" "12000"
- Option "Potocol" "Auto"
- Option "AlwaysCore" "true"
- Option "Resolution" "2540"
- Option "MaxY" "12000"
- Option "InputFashion" "Tablet"
- Option "Cursor" "stylus"
- Option "Name" "SummaSketch III"
- Option "SendCoreEvents" "on"
- EndSection
|
et voici /var/log/Xorg.0.log
Code :
- X.Org X Server 1.6.5
- Release Date: 2009-10-11
- X Protocol Version 11, Revision 0
- Build Operating System: Linux_2.6.22.12-server-1mdv Mandriva
- Current Operating System: Linux asterix.keridwenn.homeip.net 2.6.31.5-desktop-1mnb #1 SMP Fri Oct 23 00:05:22 EDT 2009 x86_64
- Build Date: 13 October 2009 12:19:32PM
- Before reporting problems, check http://qa.mandriva.com
- to make sure that you have the latest version.
- Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 19 21:49:55 2009
- (==) Using config file: "/etc/X11/xorg.conf"
- (==) ServerLayout "Layout0"
- (**) |-->Screen "Screen0" (0)
- (**) | |-->Monitor "Monitor0"
- (**) | |-->Device "Device0"
- (**) |-->Input Device "Keyboard0"
- (**) |-->Input Device "SummaSketch III"
- (==) Automatically adding devices
- (==) Automatically enabling devices
- (**) FontPath set to:
- /usr/share/fonts/default/Type1,
- catalogue:/etc/X11/fontpath.d
- (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
- (II) Cannot locate a core pointer device.
- (II) The server relies on HAL to provide the list of input devices.
- If no devices become available, reconfigure HAL or disable AllowEmptyInput.
- (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
- (WW) Disabling Keyboard0
- (II) Loader magic: 0xb40
- (II) Module ABI versions:
- X.Org ANSI C Emulation: 0.4
- X.Org Video Driver: 5.0
- X.Org XInput driver : 4.0
- X.Org Server Extension : 2.0
- (II) Loader running on linux
- (++) using VT number 7
- (--) PCI:*(0:1:0:0) 10de:0402:10de:050e nVidia Corporation G84 [GeForce 8600 GT] rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
- (II) Open ACPI successful (/var/run/acpid.socket)
- (II) System resource ranges:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (II) "extmod" will be loaded by default.
- (II) "dbe" will be loaded by default.
- (II) "glx" will be loaded by default.
- (II) "record" will be loaded by default.
- (II) "dri" will be loaded by default.
- (II) "dri2" will be loaded by default.
- (II) LoadModule: "summa"
- (II) Loading /usr/lib64/xorg/modules/input//summa_drv.so
- (II) Module summa: vendor="X.Org Foundation"
- compiled for 1.4.2, module version = 1.2.0
- Module class: X.Org XInput Driver
- ABI class: X.Org XInput driver, version 2.0
- (EE) module ABI major version (2) doesn't match the server's version (4)
- (II) UnloadModule: "summa"
- (II) Unloading /usr/lib64/xorg/modules/input//summa_drv.so
- (EE) Failed to load module "summa" (module requirement mismatch, 0)
- (II) LoadModule: "extmod"
- (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
- (II) Module extmod: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.0.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension Multi-Buffering
- (II) Loading extension MIT-SCREEN-SAVER
- (II) Loading extension XFree86-VidModeExtension
- (II) Loading extension XFree86-DGA
- (II) Loading extension DPMS
- (II) Loading extension XVideo
- (II) Loading extension XVideo-MotionCompensation
- (II) Loading extension X-Resource
- (II) LoadModule: "dbe"
- (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
- (II) Module dbe: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.0.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension DOUBLE-BUFFER
- (II) LoadModule: "glx"
- (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
- (II) Module glx: vendor="NVIDIA Corporation"
- compiled for 4.0.2, module version = 1.0.0
- Module class: X.Org Server Extension
- (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009
- (II) Loading extension GLX
- (II) LoadModule: "record"
- (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
- (II) Module record: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.13.0
- Module class: X.Org Server Extension
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension RECORD
- (II) LoadModule: "dri"
- (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
- (II) Module dri: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.0.0
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension XFree86-DRI
- (II) LoadModule: "dri2"
- (II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
- (II) Module dri2: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.1.0
- ABI class: X.Org Server Extension, version 2.0
- (II) Loading extension DRI2
- (II) LoadModule: "nvidia"
- (II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
- (II) Module nvidia: vendor="NVIDIA Corporation"
- compiled for 4.0.2, module version = 1.0.0
- Module class: X.Org Video Driver
- (II) LoadModule: "summa"
- (II) Loading /usr/lib64/xorg/modules/input//summa_drv.so
- (II) Module summa: vendor="X.Org Foundation"
- compiled for 1.4.2, module version = 1.2.0
- Module class: X.Org XInput Driver
- ABI class: X.Org XInput driver, version 2.0
- (EE) module ABI major version (2) doesn't match the server's version (4)
- (II) UnloadModule: "summa"
- (II) Unloading /usr/lib64/xorg/modules/input//summa_drv.so
- (EE) Failed to load module "summa" (module requirement mismatch, 0)
- (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009
- (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
- (II) Primary Device is: PCI 01@00:00:0
- (II) Loading sub module "fb"
- (II) LoadModule: "fb"
- (II) Loading /usr/lib64/xorg/modules//libfb.so
- (II) Module fb: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.0.0
- ABI class: X.Org ANSI C Emulation, version 0.4
- (II) Loading sub module "wfb"
- (II) LoadModule: "wfb"
- (II) Loading /usr/lib64/xorg/modules//libwfb.so
- (II) Module wfb: vendor="X.Org Foundation"
- compiled for 1.6.5, module version = 1.0.0
- ABI class: X.Org ANSI C Emulation, version 0.4
- (II) Loading sub module "ramdac"
- (II) LoadModule: "ramdac"
- (II) Module "ramdac" already built-in
- (II) resource ranges after probing:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
- (==) NVIDIA(0): RGB weight 888
- (==) NVIDIA(0): Default visual is TrueColor
- (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
- (**) NVIDIA(0): Enabling RENDER acceleration
- (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
- (II) NVIDIA(0): enabled.
- (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
- (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
- (--) NVIDIA(0): Memory: 524288 kBytes
- (--) NVIDIA(0): VideoBIOS: 60.84.54.00.00
- (II) NVIDIA(0): Detected PCI Express Link width: 16X
- (--) NVIDIA(0): Interlaced video modes are supported on this GPU
- (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0:
- (--) NVIDIA(0): CRT-0
- (--) NVIDIA(0): ACI PW191 (CRT-1)
- (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
- (--) NVIDIA(0): ACI PW191 (CRT-1): 400.0 MHz maximum pixel clock
- (II) NVIDIA(0): Assigned Display Device: CRT-1
- (==) NVIDIA(0):
- (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
- (==) NVIDIA(0): will be used as the requested mode.
- (==) NVIDIA(0):
- (II) NVIDIA(0): Validated modes:
- (II) NVIDIA(0): "nvidia-auto-select"
- (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
- (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
- (--) NVIDIA(0): option
- (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
- (--) Depth 24 pixmap format is 32 bpp
- (II) do I need RAC? No, I don't.
- (II) resource ranges after preInit:
- [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
- [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
- [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
- [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
- [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
- [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
- (II) NVIDIA(0): Initialized GPU GART.
- (II) NVIDIA(0): Setting mode "nvidia-auto-select"
- (II) Loading extension NV-GLX
- (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
- (==) NVIDIA(0): Disabling shared memory pixmaps
- (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
- (==) NVIDIA(0): Backing store disabled
- (==) NVIDIA(0): Silken mouse enabled
- (**) NVIDIA(0): DPMS enabled
- (II) Loading extension NV-CONTROL
- (II) Loading extension XINERAMA
- (==) RandR enabled
- (II) Initializing built-in extension Generic Event Extension
- (II) Initializing built-in extension SHAPE
- (II) Initializing built-in extension MIT-SHM
- (II) Initializing built-in extension XInputExtension
- (II) Initializing built-in extension XTEST
- (II) Initializing built-in extension BIG-REQUESTS
- (II) Initializing built-in extension SYNC
- (II) Initializing built-in extension XKEYBOARD
- (II) Initializing built-in extension XC-MISC
- (II) Initializing built-in extension SECURITY
- (II) Initializing built-in extension XINERAMA
- (II) Initializing built-in extension XFIXES
- (II) Initializing built-in extension XFree86-Bigfont
- (II) Initializing built-in extension RENDER
- (II) Initializing built-in extension RANDR
- (II) Initializing built-in extension COMPOSITE
- (II) Initializing built-in extension DAMAGE
- (II) Initializing extension GLX
- (II) LoadModule: "summa"
- (II) Loading /usr/lib64/xorg/modules/input//summa_drv.so
- (II) Module summa: vendor="X.Org Foundation"
- compiled for 1.4.2, module version = 1.2.0
- Module class: X.Org XInput Driver
- ABI class: X.Org XInput driver, version 2.0
- (EE) module ABI major version (2) doesn't match the server's version (4)
- (II) UnloadModule: "summa"
- (II) Unloading /usr/lib64/xorg/modules/input//summa_drv.so
- (EE) Failed to load module "summa" (module requirement mismatch, 0)
- (EE) No input driver matching `summa'
- (II) config/hal: Adding input device AT Translated Set 2 keyboard
- (II) LoadModule: "evdev"
- (II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
- (II) Module evdev: vendor="X.Org Foundation"
- compiled for 1.6.3, module version = 2.2.5
- Module class: X.Org XInput Driver
- ABI class: X.Org XInput driver, version 4.0
- (**) AT Translated Set 2 keyboard: always reports core events
- (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
- (II) AT Translated Set 2 keyboard: Found keys
- (II) AT Translated Set 2 keyboard: Configuring as keyboard
- (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "pc105"
- (**) Option "xkb_layout" "fr"
- (**) Option "xkb_options" "compose:rwin"
- (II) config/hal: Adding input device Power Button
- (**) Power Button: always reports core events
- (**) Power Button: Device: "/dev/input/event3"
- (II) Power Button: Found keys
- (II) Power Button: Configuring as keyboard
- (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "pc105"
- (**) Option "xkb_layout" "fr"
- (**) Option "xkb_options" "compose:rwin"
- (II) config/hal: Adding input device Power Button
- (**) Power Button: always reports core events
- (**) Power Button: Device: "/dev/input/event2"
- (II) Power Button: Found keys
- (II) Power Button: Configuring as keyboard
- (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
- (**) Option "xkb_rules" "evdev"
- (**) Option "xkb_model" "pc105"
- (**) Option "xkb_layout" "fr"
- (**) Option "xkb_options" "compose:rwin"
- (II) config/hal: Adding input device Macintosh mouse button emulation
- (**) Macintosh mouse button emulation: always reports core events
- (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
- (II) Macintosh mouse button emulation: Found 3 mouse buttons
- (II) Macintosh mouse button emulation: Found x and y relative axes
- (II) Macintosh mouse button emulation: Configuring as mouse
- (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
- (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
- (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
- (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
- (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
- (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
- (II) Macintosh mouse button emulation: initialized for relative axes.
- (II) Open ACPI successful (/var/run/acpid.socket)
- (II) NVIDIA(0): Setting mode "nvidia-auto-select"
- (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
- (II) Power Button: Device reopened after 1 attempts.
- (II) Power Button: Device reopened after 1 attempts.
- (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
- (II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
- (**) Logitech USB-PS/2 Optical Mouse: always reports core events
- (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
- (II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
- (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
- (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
- (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
- (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
- (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
- (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
- (**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
- (**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
- (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
|
par contre on peut voir des message d'erreur a la ligne 63,64,65,66 - 125,126,127,128 - 228,229,230,231,232
comment puis-je les résoudre?
ps: j'ai essayé sous window seven par l'intermediaire d'un adaptateur serie usb j'arrive a voir "usb serial port" mais je n'arrive pas à le faire reconaitre et je vois aussi "usb serial converter" qui lui est reconnu mais sa c'est l'adaptateur serie/usb
euh si je ne suis pas dans la bonne catégorie veuilliez me le faire part ---------------
mon feed back : http://forum.hardware.fr/hfr/Achat [...] 4251_1.htm
|