julouze May the louze be with you ! | Voici mon XF86Config. Peut-être que le problème vient de là.
Code :
- # File generated by XFdrake.
- # **********************************************************************
- # Refer to the XF86Config(4/5) man page for details about the format of
- # this file.
- # **********************************************************************
- Section "Files"
- RgbPath "/usr/X11R6/lib/X11/rgb"
- # Multiple FontPath entries are allowed (they are concatenated together)
- # By default, Mandrake 6.0 and later now use a font server independent of
- # the X server to render fonts.
- FontPath "unix/:-1"
- EndSection
- # **********************************************************************
- # Server flags section.
- # **********************************************************************
- Section "ServerFlags"
- # Uncomment this to cause a core dump at the spot where a signal is
- # received. This may leave the console in an unusable state, but may
- # provide a better stack trace in the core dump to aid in debugging
- #NoTrapSignals
- # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
- # This allows clients to receive this key event.
- #DontZap
- # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
- # sequences. This allows clients to receive these key events.
- #DontZoom
- # This allows the server to start up even if the
- # mouse device can't be opened/initialised.
- AllowMouseOpenFail
- EndSection
- # **********************************************************************
- # Input devices
- # **********************************************************************
- # **********************************************************************
- # Keyboard section
- # **********************************************************************
- Section "InputDevice"
- Identifier "Keyboard1"
- Driver "Keyboard"
- Option "AutoRepeat" "250 30"
- Option "XkbRules" "xfree86"
- Option "XkbModel" "pc105"
- Option "XkbLayout" "fr_CH"
- EndSection
- # **********************************************************************
- # Pointer section
- # **********************************************************************
- Section "InputDevice"
- Identifier "Mouse1"
- Driver "mouse"
- Option "Protocol" "IMPS/2"
- Option "Device" "/dev/usbmouse"
- Option "ZAxisMapping" "4 5"
- # Option "Emulate3Buttons"
- # Option "Emulate3Timeout" "50"
- # ChordMiddle is an option for some 3-button Logitech mice
- # Option "ChordMiddle"
- EndSection
- Section "Module"
- # This loads the DBE extension module.
- Load "dbe"
- # This loads the Video for Linux module.
- Load "v4l"
- Load "glx"
- Load "dri"
- # This loads the miscellaneous extensions module, and disables
- # initialisation of the XFree86-DGA extension within that module.
- SubSection "extmod"
- #Option "omit xfree86-dga"
- EndSubSection
- # This loads the Type1 and FreeType font modules
- Load "type1"
- Load "freetype"
- EndSection
- Section "DRI"
- Mode 0666
- EndSection
- # **********************************************************************
- # Monitor section
- # **********************************************************************
- # Any number of monitor sections may be present
- Section "Monitor"
- Identifier "monitor1"
- VendorName "Unknown"
- ModelName "Unknown"
- # HorizSync is in kHz unless units are specified.
- # HorizSync may be a comma separated list of discrete values, or a
- # comma separated list of ranges of values.
- # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
- # USER MANUAL FOR THE CORRECT NUMBERS.
- HorizSync 30-70
- # VertRefresh is in Hz unless units are specified.
- # VertRefresh may be a comma separated list of discrete values, or a
- # comma separated list of ranges of values.
- # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
- # USER MANUAL FOR THE CORRECT NUMBERS.
- VertRefresh 50-120
- # This is a set of extended mode timings typically used for laptop,
- # TV fullscreen mode or DVD fullscreen output.
- # These are available along with standard mode timings.
- # Sony Vaio C1(X,XS,VE,VN)?
- # 1024x480 @ 85.6 Hz, 48 kHz hsync
- ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
- # 768x576 @ 79 Hz, 50 kHz hsync
- ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
- # 768x576 @ 100 Hz, 61.6 kHz hsync
- ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
- EndSection
- # **********************************************************************
- # Graphics device section
- # **********************************************************************
- Section "Device"
- Identifier "Generic VGA"
- Driver "vga"
- EndSection
- Section "Device"
- Identifier "Voodoo3 (generic)"
- VendorName "Unknown"
- BoardName "Unknown"
- Driver "tdfx"
- # VideoRam 16384
- # Clock lines
- # Uncomment following option if you see a big white block
- # instead of the cursor!
- # Option "sw_cursor"
- Option "AGPMode" "1"
- Option "DPMS" "on"
- EndSection
- # **********************************************************************
- # Screen sections
- # **********************************************************************
- Section "Screen"
- Identifier "screen1"
- Device "Voodoo3 (generic)"
- Monitor "monitor1"
- DefaultColorDepth 16
- Subsection "Display"
- Depth 8
- Modes "1024x768" "800x600" "640x400"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 16
- Modes "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 24
- Modes "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 32
- Modes "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
- Section "ServerLayout"
- Identifier "layout1"
- Screen "screen1"
- InputDevice "Mouse1" "CorePointer"
- InputDevice "Keyboard1" "CoreKeyboard"
- EndSection
|
|
