salut a tous
J'ai un probleme avec mon graveur de cd
il n'accepte pas de graver les cd-r
alors que les rw il n'y a pas de probleme
je ne comprend pas
si vous avez des ideés merci par avance
def29
ps cijoint rapport de nero pour un echec de gravure
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.9.13 (Nero Express)
Recorder: <LITE-ON LTR-48246S> Version: SS0E - HA 0 TA 1 - 5.5.9.13
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <BDV 108A DVDROM 00/03/21>Version: 2.00 - HA 0 TA 0 - 5.5.9.13
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
BDV 108A DVDROM 00/03/21 (Target 0, E
: Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
LITE-ON LTR-48246S (Target 1, F: Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 28311552 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 191MB (196024kB)
Free physical memory: 1MB (1992kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
30.4.2004
CD-ROM (ISO)
10:17:59 #1 Text 0 File Isodoc.cpp, Line 6874
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:17:59 #2 Phase 90 File dlgbrnst.cpp, Line 1571
Buffer Underrun Protection activated
10:17:59 #3 Text 0 File Reader.cpp, Line 118
Reader running
10:17:59 #4 Text 0 File Writer.cpp, Line 134
Writer LITE-ON LTR-48246S running
10:17:59 #5 ISO9660GEN -11 File geniso.cpp, Line 4487
First writeable address = 0 (0x00000000)
10:17:59 #6 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media
10:17:59 #7 Text 0 File ThreadedTransferInterface.cpp, Line 666
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 353977 (353977) = #353977/78:39.52
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
10:18:00 #8 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 353976 (78:41.51)
10:18:00 #9 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE
10:18:00 #10 Text 0 File DlgWaitCD.cpp, Line 1407
Recorder: LITE-ON LTR-48246S;
CDRW code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
10:18:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 818
Prepare recorder LITE-ON LTR-48246S for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 725252096
10:18:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Removed 2 run-out blocks from end of track 1.
10:18:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 666
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 353977 (353977) = #353977/78:39.52
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353975 blocks [LITE-ON LTR-48246S ]
--------------------------------------------------------------
10:18:00 #14 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 48x (7 200 Ko/s)
10:18:00 #15 Phase 109 File dlgbrnst.cpp, Line 1571
Warning: Disabling SMART-BURN function may result in writing errors and impact on the quality of disc recorded.
10:18:00 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
10:18:00 #17 Text 0 File Mmc.cpp, Line 17050
Set BUFE: supported -> ON , SMART-BURN : OFF
10:19:34 #18 Text 0 File Scsicmd.cpp, Line 1935
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 00 00 00 00 00 1F 00 00 00
10:19:34 #19 CDR -1175 File Cdrdrv.cpp, Line 1329
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
10:19:34 #20 SCSI -26 File Cdrdrv.cpp, Line 1360
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x044C0000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
10:19:34 #21 SCSI -26 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x044C0000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
10:19:34 #22 CDR -26 File Writer.cpp, Line 342
SCSI/ATAPI command timeout error
10:19:34 #23 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
10:19:34 #24 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
10:19:44 #25 Text 0 File Scsicmd.cpp, Line 1935
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
10:19:44 #26 SCSI -1000 File Cdrdrv.cpp, Line 1211
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
10:19:44 #27 CDR -1175 File Cdrdrv.cpp, Line 1227
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 00 00 00 00 00 00 00 00 00 00 00
10:19:44 #28 SCSI -26 File Cdrdrv.cpp, Line 1255
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
10:21:03 #29 CDR -1000 File WriterStatus.cpp, Line 185
SCSI/IDE error
10:21:03 #30 TRANSFER -18 File WriterStatus.cpp, Line 185
Could not perform EndTrack
10:21:03 #31 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state
10:21:03 #32 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack
10:21:04 #33 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 48x (7 200 Ko/s)
10:21:04 #34 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 11:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 27/04/2004 09:25:58
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 27/04/2004 09:25:58
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03/03/2001 04:55:54
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ntmap.sys': Ver=4.90.3000, size=8704 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.90.3000, size=12917 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
