Hello,
 
This is a known issue with some of our power supplies.  To remedy the problem, follow the suggestions below,
 
1.  If it's not necessary to monitor the RPM of the psu fan, do not connect it.
2.  Return the psu to the original place of purchase and have it replaced.
 
I hope this helps.  Thank you for your patience.
 
antec tech support
 
-----Original Message-----
From: ********************************
Sent: Wednesday, July 24, 2002 11:46 AM
To: **********************************
Subject: FW: Problème avec alimentation ANTEC
 
 
 
 
-----Original Message-----
From: ************************************
Sent: Wednesday, July 24, 2002 11:36 AM
To: ************************************
Subject: Re: Problème avec alimentation ANTEC
 
Please tell them it is a defective PSU and to exchange it for a new one.
 
 
----- Original Message -----
From: ************************************
To: ************************************
Cc: ************************************
Sent: Wednesday, July 24, 2002 9:43 AM
Subject: FW: Problème avec alimentation ANTEC
 
 
Han,
 
Another one, but with a PP352XF.
=========================
Date: 24/07/02 15:29
From: ******
Hi,
I own an Antec 350W PP352XF which came with my case. But it is impossible to plug the connector that allows fan speed monitoring in the place it is supposed to go to (PWR FAN) on the MB.
As soon as this connector is plugged in, the PSU fan rotates to maximum speed permanently. I tried this PSU on another MB with unfortunately the same result. What should I do?
 
Thanks in advance for taking the time to solve my problem.
 
Regards.