Citation :
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S183A>Version: SB03 - HA 1 TA 4 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD163 >Version: GH5S - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : JLMS XJ-HD163 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y160P0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : TSSTcorp CD/DVDW SH-S183A nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : SAMSUNG HD501LJ nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : UM4854Q FCW744Y 2.0B acv7g81s Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
JLMS XJ-HD163 E: CDRom0
TSSTcorp CD/DVDW SH-S183A G: CDRom4
UM4854Q FCW744Y I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.9.2007
UDF compilation
15:41:27 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
15:41:27 #2 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
15:41:27 #3 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
15:41:50 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2294799 (509:57.24, 4482MB)
15:41:50 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
15:41:50 #6 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: TSSTcorp CD/DVDW SH-S183A, Media type: DVD+R
Disc Manufacturer ID: INFOME, Media Type ID: R30, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
15:41:50 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD R DL; DVD-RAM.)
15:41:50 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2294800 (2294800) = #2294800/509:57.25
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294800 blocks [G: TSSTcorp CD/DVDW SH-S183A]
--------------------------------------------------------------
15:41:51 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: TSSTcorp CD/DVDW SH-S183A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699750400, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2294800 | 0 | 0x00
2294800 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
15:41:51 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15:41:51 #11 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
15:41:51 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
15:41:51 #13 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
15:41:51 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
15:41:51 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22 160 KB/s)
15:41:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:41:51 #17 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: INFOME..
Media type ID: R30
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:41:51 #18 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: INFOME..
Media type ID: R30
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:41:51 #19 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: INFOME..
Media type ID: R30
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:41:51 #20 Text 0 File DVDR.cpp, Line 8251
Drive: TSSTcorp CD/DVDW SH-S183A
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
15:41:51 #21 CDR -1207 File DVDR.cpp, Line 6356
Book Type automatically set to: DVD-ROM
15:41:51 #22 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
15:41:51 #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
15:41:52 #24 SPTI -1064 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21
Buffer x09520080: Len x10000
0x01 00 02 00 79 00 01 00 13 51 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 10 00 4D 00 79 00 20 00
0x44 00 69 00 73 00 63 00 00 00 00 00 00 00 00 00
15:41:52 #25 CDR -1064 File Writer.cpp, Line 303
Invalid block address
G: TSSTcorp CD/DVDW SH-S183A
15:41:52 #26 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
15:41:52 #27 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
15:41:52 #28 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 32
15:41:52 #29 CDR -1046 File WriterStatus.cpp, Line 162
Illegal disc
G: TSSTcorp CD/DVDW SH-S183A
15:41:52 #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
15:41:52 #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22 160 KB/s)
15:41:52 #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
15:41:55 #33 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
15:41:55 #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
