mais non je parle pas de la totalité des pages !!
Juste de la première contribution :
procédure d'installation de WinXP/2000 sur un disque SATA :
VIA VT6420 SATA RAID and IDE controller supports two configurations:1) Two SATA HDDs + Two IDE HDDs, and 2) Four SATA HDDs. The RAID functions are only supported on SATA HDDs. It supports RAID 0, 1, 0+1 and JBOD, these functions, however, are not supported on IDE HDDS. This "VIA VT6420 Software Package" is used to install the drivers and utility which are needed for using the VIA VT6420 SATA RAID and IDE controller.
VIA VT8237 is a south bridge which includes VT6420 SATA controller so VT6420 software package also supports VT8237 SATA controller.
donc sur le CD de la mobo c'est ce qui ce trouve dans le dossier
\Drivers\VIARAID\6420RAID\DriverDisk\SATA
2. Install Windows NT 4.0, 2000, XP, or Server 2003
* Copy all files and directories of DriverDisk\SATA folder to a floppy disk. Make sure
following directories and files are copied into floppy disk.
A:\
\2003IA32
VIAsraid.inf
VIAsraid.sys
VIAsraid.cat
\Win2000
VIAsraid.inf
VIAsraid.sys
VIAsraid.cat
\Winnt40
VIAsraid.inf
VIAsraid.sys
\WinXP
VIAsraid.inf
VIAsraid.sys
VIAsraid.cat
Txtsetup.oem
VT8237
* Boot system from OS installing CD-ROM.
* Make sure VT6420 BIOS is executed by the system BIOS when POST.
* Press "F6" when OS installer starts running.
* Insert floppy disk.
* Choose the OS device driver wanted for loading.
* Install OS.
* Run setup.exe after OS is installed.