Salut la compagnie !
Voila, aujourd'hui, en allumant mon PC, j'ai remarqué qu'une vibration se faisait ressentir quand je vissais ou non ma porte latérale.
Impossible de régler le "taux de la vibration" en ayant le PC éteint, j'ai fait ça alors qu'il était allumé.
J'ai donc vissé et dévissé très délicatement les vis de la porte latérale pendant cinq minutes et là...écran bleu, redémarrage de l'ordi etc...
Je n'ai rien touché d'hardware, si ce n'est les vis de cette fameuse porte.
Rien d'anormal au niveaux des températures via HWmonitor, pas de problèmes au niveau des disques dur et SSD...
Jamais eu de soucis avec ma tour au par avant.
Pour ma config, la voici :
Kingston HyperX SAVAGE DDR3 2 x 4 Go PC12800 CAS 9
Be Quiet Pure Rock
MSI GeForce GTX 970 Gaming 4G - 4 Go
NZXT Source 340 - Noir
Cooler Master G550M Bronze Modulaire - 550W
Asus VN247H
Be Quiet Pure Wings 2 140 mm
Seagate Barracuda 7200.14 - SATA III 6 Gb/s - 1 To
MSI H97 GAMING 3
Crucial MX100 - 128 Go
Intel Core i5 4460
Edifier Enceinte PC 2.1 C2XD Optique
Corsair Gaming K70 - Red LED - Cherry MX Red 1
Kingston HyperX Cloud - Noir 1
Corsair Gaming Sabre Optique RGB - Noir
Voila, donc je flippe un peu...Une idée de l'origine de cet écran bleu ?
Merci les amis !
EDIT : Voila ce qu'il s'affiche sur l'écran bleu :
" A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
CRITICAL_OBJECT_TERMINATION
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000f4 (0x0000000000000003, 0xfffffa80094d8b30, 0xfffffa80094d8e10,
0xfffff80002f8e130)
*** ntoskrnl.exe - Address 0xfffff80002c86ec0 base at 0xfffff80002c12000 DateStamp
0x54d0317d "
Message édité par Ukuleliste le 07-04-2015 à 23:35:20