Bonjour,
J'ai un disque dur Hitachi 1To qui déconne depuis quelques jours. J'ai effectué un test avec le logiciel GSmartControl qui m'indique 2 erreurs "Uncorrectable error in data". J'ai essayé de suivre les conseils que j'ai trouvé sur des forums anglophone mais je n'ai pas tout compris !
Voici le détail de l'onglet Error log :
Complete error log:
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 1328 hours (55 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 61 d1 91 32 00 Error: UNC 97 sectors at LBA = 0x003291d1 = 3314129
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 80 b2 91 32 e0 00 39d+15:58:45.631 READ DMA EXT
25 03 80 b2 db 54 e0 00 39d+15:58:45.583 READ DMA EXT
25 03 80 32 db 54 eb 00 39d+15:58:45.569 READ DMA EXT
25 03 01 72 c6 ff e0 00 39d+15:58:45.567 READ DMA EXT
25 03 80 b2 da 54 eb 00 39d+15:58:45.468 READ DMA EXT
Error 1 occurred at disk power-on lifetime: 1328 hours (55 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 59 59 8b 32 00 Error: UNC 89 sectors at LBA = 0x00328b59 = 3312473
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 80 32 8b 32 e0 00 39d+15:50:38.462 READ DMA EXT
25 03 80 b2 8a 32 e0 00 39d+15:50:08.965 READ DMA EXT
25 03 20 4a d4 54 eb 00 39d+15:50:08.960 READ DMA EXT
25 03 80 32 8a 32 e0 00 39d+15:49:27.200 READ DMA EXT
25 03 80 b2 89 32 e0 00 39d+15:48:43.788 READ DMA EXT
Pourriez vous m'aider à comprendre et résoudre ce problème de secteur ?
