Bjr
Alors , je vend :
Une carte mere qui accepte le Socket / FCPGA , elle accepte les 2 normes .
20euro
Voici ses caracteristiques :
Slot-1 Processor Support
Pentium-III support for 450-550 Mhz clock rates
Pentium-II support for 233-450 Mhz clock rates
SEPP Celeron support for 233-533 Mhz clock rates
Support for 66Mhz and 100Mhz FSB
All processors configured by CPU Plug & Play
Socket-370 Processor Support
The PPGA Celeron provides Pentium-II performance with integrated level 1 and level 2 cache memory
PPGA Celerons run for 300-533Mhz
Supports a 66 Mhz FSB
All Celerons are automatically configured using firmware
Memory Support
Three DIMM slots for SDRAM 168-pin memory modules
Support for 66Mhz & 100Mhz memory bus
Maximum installed memory can be 3 x 256 MB = 768 MB
Expansion Slots
3x 32-bit PCI slot
1x 8/16-bit ISA slot
1x AGP slot
Onboard IDE channels
Primary and Secondary PCI IDE channels
Support for PIO modes
Support for Bus mastering and UltraDMA 33 modes
Power Supply and Power Management
ATX power supply
Support for Green PC standard, suspend switch, keyboard power on/off
Sound System
Full duplex playback and recording with built-in 16-bit CODEC
Drivers support DOS/Win95/Win98/WinNT 4.0
Provides MPU-401 Game/MIDI port and legacy Sound Blaster 16 support
Digital Audio Interface (SPDIF In/Out) with 24-bit stereo, 44KHz sampling rate and measured 120dB audio quality
The audio system can output to 4 loudspeakers
Onboard I/O Ports
Floppy disk drive port with 1Mb/s transfer rate
One serial ports with 16550-compatible fast UART
One parallel port with support for ECP and EPP
Two USB ports
One PS/2 port (for mouse)
Hardware Monitoring
Built-in hardware monitoring for CPU temperature and fan speeds
Onboard Flash ROM
Provides plug and play function for automatic CPU and board configuration
Supports plug and play configuration of peripheral devices and expansion cards
La CM MSI + La Carte Son Hercules + le DD 4.2go + le dudu 650Mhz à 50 le tout !
Message édité par oneshotonekill le 12-10-2004 à 11:44:09