octane# hinv -mv
Location: /hw/node
PM10250MHZ Board: barcode GWT792 part 030-1284-002 rev B
Location: /hw/node/xtalk/15
IP30 Board: barcode GYK698 part 030-0887-004 rev B
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE8230134 part 060-0035-001 rev B
FP1 Board: barcode 25954C part 030-0891-003 rev E
Location: /hw/node/xtalk/12
MOT10 Board: barcode HBD405 part 030-1241-002 rev F
1 250 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3
octane# /usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0" ) 1280x1024 Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev G, VC3 rev A, CMAP rev E, Heart rev E
21" monitor (id 0xb)
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 75.92Hz (1280x1024_76)
|