Bonjour,
J'ai un conseil à vous demander.
Actuellement, j'ai cette config (extrait) et je voudrais passer à 8 Go, voire plus (16 Go).
Processors Information
Socket 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core i5 2500K
Codename Sandy Bridge
Specification Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Package (platform ID) Socket 1155 LGA (0x1)
CPUID 6.A.7
Extended CPUID 6.2A
Core Stepping D2
Technology 32 nm
TDP Limit 95.0 Watts
Tjmax 98.0 °C
Core Speed 1559.0 MHz
Multiplier x Bus Speed 16.0 x 97.4 MHz
Stock frequency 3300 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, AES, AVX
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 6 MBytes, 12-way set associative, 64-byte line size
Max CPUID level 0000000Dh
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 2 thread(s)
Cache descriptor Level 1, I, 32 KB, 2 thread(s)
Cache descriptor Level 2, U, 256 KB, 2 thread(s)
Cache descriptor Level 3, U, 6 MB, 16 thread(s)
FID/VID Control yes
Turbo Mode supported, enabled
Max non-turbo ratio 33x
Max turbo ratio 37x
Max efficiency ratio 16x
Min Power 60 Watts
O/C bins unlimited
Ratio 1 core 37x
Ratio 2 cores 36x
Ratio 3 cores 35x
Ratio 4 cores 34x
Temperature 0 39 degC (102 degF) (Package)
Temperature 1 38 degC (100 degF) (Core #0)
Temperature 2 38 degC (100 degF) (Core #2)
Temperature 3 38 degC (100 degF) (Core #4)
Temperature 4 38 degC (100 degF) (Core #6)
Voltage 0 0.97 Volts (VID)
Power 0 8.66 W (Package)
Power 1 3.91 W (IA Cores)
Power 2 n.a. (GT)
Power 3 4.75 W (Uncore)
Clock Speed 0 1558.96 MHz (Core #0)
Clock Speed 1 1558.96 MHz (Core #2)
Clock Speed 2 1558.96 MHz (Core #4)
Clock Speed 3 1558.96 MHz (Core #6)
Chipset
Northbridge Intel Sandy Bridge rev. 09
Southbridge Intel P67 rev. B3
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 4 GBytes
Channels Dual
Memory Frequency 649.6 MHz (1:5)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Command Rate (CR) 1T
Host Bridge 0x0100
Memory SPD
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000000000)
Size 2048 MBytes
Max bandwidth PC3-10700H (667 MHz)
Part number VS2GB1333D4
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-16-23 @ 444 MHz
JEDEC #2 7.0-7-7-19-27 @ 518 MHz
JEDEC #3 8.0-8-8-22-30 @ 592 MHz
JEDEC #4 9.0-9-9-24-34 @ 666 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000000000)
Size 2048 MBytes
Max bandwidth PC3-10700H (667 MHz)
Part number VS2GB1333D4
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-16-23 @ 444 MHz
JEDEC #2 7.0-7-7-19-27 @ 518 MHz
JEDEC #3 8.0-8-8-22-30 @ 592 MHz
JEDEC #4 9.0-9-9-24-34 @ 666 MHz00][/#FFAA00]
Qu'est ce que je peux mettre comme RAM et puis-je "mixer" celle que je possède afin d'augmenter la RAM car ça rame avec Windows 10 !
Avez-vous des références et/ou marques précises à acquérir (pas des 100 €) pour "booster" ma config ?
Merci de votre aide.
Bonne soirée.
